Third Generation F-Body Message Boards
Donor car (Flood damaged)
Donor car (Flood damaged)
0 2017/11/08 13:05:18
LS1 Engine
LS1 Engine
0 2017/11/08 13:05:37
Engine and Trans removed and engine bay pressure washed.
Engine and Trans removed and engine bay pressure washed.
0 2017/11/08 13:06:19
0 2017/11/08 16:39:37
0 2017/11/08 16:40:05
700R4 around 30k miles since professional rebuild and new torque converter
700R4 around 30k miles since professional rebuild and new torque converter
0 2017/11/10 20:15:43
Engine long block sold as core... Jegs stand can be included for $25 will pull intake when I sell it leaving it on to keep dry. Looks like some oil bypass on front passenger plug and a couple header studs need drilled out. Water pump included it's the cheap auto parts store version.
Engine long block sold as core... Jegs stand can be included for $25 will pull intake when I sell it leaving it on to keep dry. Looks like some oil bypass on front passenger plug and a couple header studs need drilled out. Water pump included it's the cheap auto parts store version.
0 2017/11/10 20:16:19
Any body part or if you are willing to wait until I have all my parts off 2000 formula
Any body part or if you are willing to wait until I have all my parts off 2000 formula
0 2017/11/10 20:19:26
Opps I took apart my car
Opps I took apart my car
0 2017/11/20 20:59:36
Test fit BMR kmember... Fit pretty well.
Test fit BMR kmember... Fit pretty well.
0 2017/11/20 21:00:00
Still need to make some filler panels hit it with primer since it is humid here raw steal will rust quicjly.
Still need to make some filler panels hit it with primer since it is humid here raw steal will rust quicjly.
0 2017/11/20 21:01:21
0 2017/11/24 18:09:44
0 2017/11/24 18:10:25
0 2017/12/17 08:42:26
Intake is just sitting there, I wanted to make sure the throttle cable and gas lines lined up.
Intake is just sitting there, I wanted to make sure the throttle cable and gas lines lined up.
0 2018/04/09 06:11:07
First bolt in.
First bolt in.
0 2018/04/09 06:11:13
0 2018/04/09 06:11:23
The trans cross member and the sub-frame connectors don't quite get alone For now just using spacers to pull it back in alignment.
The trans cross member and the sub-frame connectors don't quite get alone For now just using spacers to pull it back in alignment.
0 2018/04/09 06:11:29
Ended up making new fuel lines from tank to engine... This allows me to use the soft lines from the 2000 donor car. Zip ties are just to hold them while shaping it. WIllwood prop valve. Used an adapter for the rear line and cut and flared the front lines.
Ended up making new fuel lines from tank to engine... This allows me to use the soft lines from the 2000 donor car. Zip ties are just to hold them while shaping it. WIllwood prop valve. Used an adapter for the rear line and cut and flared the front lines.
0 2018/04/09 06:12:03
0 2018/04/15 10:54:53
0 2018/04/15 10:55:01
0 2018/04/15 10:55:07
0 2018/04/15 10:55:13
0 2018/04/15 10:55:19
0 2018/04/15 10:55:26
0 2018/04/15 10:55:34
0 2018/04/15 10:55:42
Before I pulled from donor car, don't have emission lines on 89 car yet
Before I pulled from donor car, don't have emission lines on 89 car yet
0 2018/05/18 15:13:34
0 2018/06/06 13:06:51
Black/white is the ground for the passkey module in C207 on the 1989.
Black/white is the ground for the passkey module in C207 on the 1989.
0 2018/06/25 17:41:10
0 2018/06/25 17:49:12
C207 with port m grounded
C207 with port m grounded
0 2018/06/25 18:10:48
0 2018/06/25 18:10:57
0 2018/07/04 20:10:53
I decided to use the trigger, but you don't have to you could just depressurize it before you unscrew the fitting when done. If I used this often I would of bought a swivel end to make screwing the fitting in easier and a ball valve to turn it on/off.
I decided to use the trigger, but you don't have to you could just depressurize it before you unscrew the fitting when done. If I used this often I would of bought a swivel end to make screwing the fitting in easier and a ball valve to turn it on/off.
0 2018/07/06 13:10:04
The finish product I went with the 2 gallon sprayer so there was plenty of air space.
The finish product I went with the 2 gallon sprayer so there was plenty of air space.
0 2018/07/06 13:10:06
The fittings, M16-1.5 male to 1/4NPT female, 1/4 NPT to 1/4 hose barb. 3 hose clamps. and a tire Schrader valve to make it easier.
The fittings, M16-1.5 male to 1/4NPT female, 1/4 NPT to 1/4 hose barb. 3 hose clamps. and a tire Schrader valve to make it easier.
0 2018/07/06 13:10:08
Drill a hole and mount the schrader valve so you don't have to pump the bottle up, you can just use your air compressor.
Drill a hole and mount the schrader valve so you don't have to pump the bottle up, you can just use your air compressor.
0 2018/07/06 13:10:10
0 2018/09/12 06:46:53
The splurge
The splurge
0 2018/09/13 10:22:37