Third Generation F-Body Message Boards
Its almost done.
Its almost done.
0 2016/07/10 21:16:52
Here is what we have now. Added the separation wall with entry door and window. Piped in air from the main shop, added 12 LED lights, 9000cfm fan, paneled the ceiling/ walls.
Here is what we have now. Added the separation wall with entry door and window. Piped in air from the main shop, added 12 LED lights, 9000cfm fan, paneled the ceiling/ walls.
0 2016/07/10 21:16:48
All cleaned up. Anyone doing a restoration, a nice blasting cabinet is PRICELESS!!!
All cleaned up. Anyone doing a restoration, a nice blasting cabinet is PRICELESS!!!
0 2016/07/10 20:46:18
Dust shields are getting powedercoated too, after they come out of the blasting cabinet
Dust shields are getting powedercoated too, after they come out of the blasting cabinet
0 2016/07/10 20:46:03
Prior to powder coating everything they gotta be blasted in the cabinet and bushing pressed out. I think I'm gonna go with all rubber instead of Poly.
Prior to powder coating everything they gotta be blasted in the cabinet and bushing pressed out. I think I'm gonna go with all rubber instead of Poly.
0 2016/07/10 20:45:34
All blasted.
All blasted.
0 2016/07/10 20:44:59
What a mess. The struts were done, the bushing in the A Arms are shot and all the bearings for the tie rod ends are spent. All is getting replaced.
What a mess. The struts were done, the bushing in the A Arms are shot and all the bearings for the tie rod ends are spent. All is getting replaced.
0 2016/07/10 20:44:44
After a new panels is welded in and primed, this was a bit tricky to make sure the key tumbler would se correctly
After a new panels is welded in and primed, this was a bit tricky to make sure the key tumbler would se correctly
0 2016/07/10 20:44:29
Ok so... Someone broke the truck, so some genius decided to pry out the key lock
Ok so... Someone broke the truck, so some genius decided to pry out the key lock
0 2016/07/10 20:44:22
0 2016/07/10 20:38:36
Body prep lean to.... Paint booth is outback
Body prep lean to.... Paint booth is outback
0 2016/04/25 22:17:31
Engine room/ supply
Engine room/ supply
0 2016/04/25 22:17:28
The main shop
The main shop
0 2016/04/25 22:17:26
Ash tray door tab is broken
Ash tray door tab is broken
0 2016/02/13 17:45:33
0 2016/02/13 17:44:29
0 2016/02/12 23:20:51
0 2016/02/12 23:19:46
0 2016/02/11 21:19:23
0 2016/02/11 21:16:50
0 2016/02/11 06:53:33
0 2016/02/11 06:53:26
0 2016/02/06 21:40:42
0 2016/02/06 19:26:04
0 2016/02/05 15:30:20
0 2016/02/05 15:30:18
0 2016/02/05 15:30:16
0 2016/02/05 15:29:43
0 2016/02/05 15:24:35
0 2015/08/15 21:58:05
0 2015/08/15 21:58:03
0 2015/08/15 21:58:02
0 2015/08/15 21:58:00
0 2015/08/15 21:57:58
Sandblasting is about 25% complete... WHAT A JOB!! Jeez, this stuff gets everywhere.
Sandblasting is about 25% complete... WHAT A JOB!! Jeez, this stuff gets everywhere.
0 2015/07/29 17:04:16
Make is so easy to roll around the shop. I actually think I will leave it like to paint it.
Make is so easy to roll around the shop. I actually think I will leave it like to paint it.
0 2015/07/13 21:33:25
Rudimentary yet effective.
Rudimentary yet effective.
0 2015/07/13 21:33:21
0 2015/07/13 21:33:18
0 2015/07/13 21:33:15
0 2015/07/13 21:33:11
0 2015/07/13 21:33:04