Third Generation F-Body Message Boards
Sprayed in gray epoxy.
Sprayed in gray epoxy.
0 2023/10/05 22:57:31
2 coats of white epoxy.
2 coats of white epoxy.
0 2023/10/05 22:57:29
Hood latch ready for gray epoxy.
Hood latch ready for gray epoxy.
0 2023/10/05 22:57:28
Mirrors sanded and ready for white epoxy.
Mirrors sanded and ready for white epoxy.
0 2023/10/05 22:57:26
Hinges ready for gray epoxy.
Hinges ready for gray epoxy.
0 2023/10/05 22:57:24
Stripping the hood hinges and latch support.
Stripping the hood hinges and latch support.
0 2023/10/04 18:18:32
First 2 coats of epoxy.
First 2 coats of epoxy.
0 2023/10/04 18:18:31
Sanded the hood to get it ready to seal in epoxy. I didnt see the need to take it to bare metal given how it sanded.
Sanded the hood to get it ready to seal in epoxy. I didnt see the need to take it to bare metal given how it sanded.
0 2023/10/04 18:18:29
0 2023/10/02 21:24:59
0 2023/10/02 21:18:11
0 2023/10/02 21:18:08
0 2023/10/02 21:18:06
Sanded and ready to spray epoxy on the underside.
Sanded and ready to spray epoxy on the underside.
0 2023/10/01 20:04:00
May possibly be the original hood based on no paint where the hinges were?
May possibly be the original hood based on no paint where the hinges were?
0 2023/10/01 20:03:59
Lots of nooks and crannies to hand sand.
Lots of nooks and crannies to hand sand.
0 2023/10/01 20:03:56
The brand new short block that we are robbing the crank and rods from to build the 302 inch engine.
The brand new short block that we are robbing the crank and rods from to build the 302 inch engine.
0 2023/09/29 23:09:14
Sealed in the passenger rear lower ground effect.
Sealed in the passenger rear lower ground effect.
0 2023/09/29 23:09:13
Happy with how the door came out given all the damage.
Happy with how the door came out given all the damage.
0 2023/09/29 23:09:11
Keep in mind this is just the first stages of primer.
Keep in mind this is just the first stages of primer.
0 2023/09/29 23:09:09
Door to quarter sealed in.
Door to quarter sealed in.
0 2023/09/29 23:09:08
Door to fender sealed in.
Door to fender sealed in.
0 2023/09/29 23:09:07
Pretty sure this is the last coat of epoxy on it wheel well to wheel well before high build. Still have to do some bondo work on the front of the fender though.
Pretty sure this is the last coat of epoxy on it wheel well to wheel well before high build. Still have to do some bondo work on the front of the fender though.
0 2023/09/29 23:09:04
One more spray out of epoxy on the door and then its ready for high build.
One more spray out of epoxy on the door and then its ready for high build.
0 2023/09/29 00:18:55
Blocking the door to quarter and found a small high spot in my bondo work.
Blocking the door to quarter and found a small high spot in my bondo work.
0 2023/09/29 00:18:53
Blocked the door to get the center body line cleaner. You wont see it once the car is painted and decaled though as it gets a black vinyl divider strip down the center to break the paint colors.
Blocked the door to get the center body line cleaner. You wont see it once the car is painted and decaled though as it gets a black vinyl divider strip down the center to break the paint colors.
0 2023/09/29 00:18:51
Sanded the bondo spot on the front and then blocked door to fender.
Sanded the bondo spot on the front and then blocked door to fender.
0 2023/09/29 00:18:50
Passenger rear lower ground effect off the parts car sanded and ready for epoxy.
Passenger rear lower ground effect off the parts car sanded and ready for epoxy.
0 2023/09/29 00:18:48
Driver lower ground effect just sitting loose. I still have to strip and epoxy the rear bumper cover plus make repairs on the passenger side.
Driver lower ground effect just sitting loose. I still have to strip and epoxy the rear bumper cover plus make repairs on the passenger side.
0 2023/09/29 00:18:47
Starting to look more like a car again.
Starting to look more like a car again.
0 2023/09/29 00:18:45
Spoiler is just setting in place. I will probably raise it with washers when painting the car just to have clean lines.
Spoiler is just setting in place. I will probably raise it with washers when painting the car just to have clean lines.
0 2023/09/29 00:18:43
Hatch and spoiler hand blocked and ready for high build.
Hatch and spoiler hand blocked and ready for high build.
0 2023/09/29 00:18:42
Same here with the screws that go in the front.
Same here with the screws that go in the front.
0 2023/09/28 01:37:13
Driver side setting in place.
Driver side setting in place.
0 2023/09/28 01:37:11
Once I bolt them back up then the front gets 2 screws behind the emblem that pulls that part into place.
Once I bolt them back up then the front gets 2 screws behind the emblem that pulls that part into place.
0 2023/09/28 01:37:09
Passenger side ground effects just sitting back on the car.
Passenger side ground effects just sitting back on the car.
0 2023/09/28 01:37:08
Top is the one off the care, its split horizontally from the wreck that bent the quarter and damaged the bumper cover. Bottom one is off the parts car.
Top is the one off the care, its split horizontally from the wreck that bent the quarter and damaged the bumper cover. Bottom one is off the parts car.
0 2023/09/28 01:37:06
2 more coats on the hatch. I think after I sand them it wont need anymore.
2 more coats on the hatch. I think after I sand them it wont need anymore.
0 2023/09/28 01:37:05
Light coat of epoxy on the undersides of the rear spoiler pieces.
Light coat of epoxy on the undersides of the rear spoiler pieces.
0 2023/09/28 01:37:03
Door ground effects.
Door ground effects.
0 2023/09/26 23:53:05
Corner spoilers.
Corner spoilers.
0 2023/09/26 23:53:04