i have a 91 camaro that had TBI in it.

im swapping a LS1 in...

i need to know the wiring for the under dash to engine harness connectors... and the whole engine bay... engine harness and other wiring underhood.....

i have a haynes manual, but the wiring pages are printed so faded that i cant even read them

can anyone here help? trickster, do you have them from the GM manual?

anyone?

 

I have the 90 & 92 service manuals if that will help you any.

 

if you could send them to me fullsize, that would be great...
my email is MrDude_1@excite.com (theres a _ between dude and 1)


mostly i need the wiring diagrams, but if you want to send the whole thing, i wont be upset.. lol. (10mb per email limit, but you can send more then one at fullsize)

 

They will be in PDF format, I will also try to include locations of components.

 

i havent gotten them yet

 

Had a slight technical difficulty as I was scanning them into the computer. It seems the road I live on is often used as the dragstrip by the country boy version of the fast and the furious. As is sometimes the case around this area, one missed the turn and wiped out the power lines. I should have them to you tomorrow or later today as the case maybe.

 

i still didnt get them

 

You have now!!!!!!!!!!!!!:lala:

 

yup


thanks! :lala:

 

damn..... thanks again tricketer..

i just had it printed out at staples... over 130 pages of nothing but wiring diagrams and connector stuff... lol

 

 

Trickster could you send that to me also im changing to a 4th gen dash and going from tbi to a Miniram.

 

here, i uploaded them all here:

http://66.83.134.202/travis/91FbodyWiring/


i donno how long they're be there, so right click save as.

 

Didnt work

 

If you have a good e-mail address I will send you the same ones that I sent MrDude_1.

 

spdfrk1990@aol.com

 

then try again at a later time... the server goes up and down thruout the day.. lol.

 

They opened for me, I have adobe acrobat 6.0 so I can just open any pdf file on the internet and save it to my harddrive. I have started sending him the same files I sent you just in case. BTW, what did it run you to have those files printed at Staples?

 

$8 to have them printed and 3 hole punched for a binder


so for a total of $9.50 i have a hard binder of every wire in my car. and every wire in a 99 LS1 engine harness.

not counting the 99 LS1 pages, its probly $7.50 somthing. there was a $2.00 fee for using a disk

 

Not too bad, just think if it had been the whole manual.

 

honestly, other then the wiring and torque specs... i dont think i need the whole manual.... lol


but i can imagine.

 

Thanks alot man

 

 

Trickster,
Where do you get those manualls from? I really would like one. I also would like an email of all of those fun wires. If I had detailed wiring like that, Mega Squirt would have been less of a hassle. DSMMA@frontiernet.net or tibo1992@yahoo.com if it is no trouble. If so I'll buy the book.

 

Hello Tibo,
The manuals I have are the GM service manuals that you can get from Helms. Since Helms is so blamed expensive for most of their manuals I decided to take the plunge and started browsing e-bay. I lucked out and managed to pick up about 12 manuals in good to excellent shape for about $200.00 plus shipping. I am now in the process of scanning several into my computer in PDF format.
BTW, there is a christmas package in your e-mail.

 

I will have to start paying more attention on ebay.

 

I hate to bring up an old thread but I'm finalizing my ls1 swap and i need a wiring diagram or it. I have searched these forums and seems both mr dudes comcast page and the page mentioned here are down. Anyone know where i can get them?

 

i emailed them to "JT" the new admin of the board.
i havent heard back from him about it though..

 

If you still have those wiring diagrams on file, would someone mind forwarding them over to me? I would greatly appreciate it ResonateEcho@gmail.com

Many thanks.

 

I need to chirp in here, if anyone still has these wireing diagrams and can forward them to me ill be more then happy to upload them to a more stable place for everyone. ( and i am in depserate need of them myself)
dseybold@gmail.com

Thanks guys!

 

I still dont have them either and everything is just about done for my ls1 except the wiring. If nyone has them, and is willing to forward them please send them to : mike@cs-performance.net Thanks.

 

i could use some wiring diagrams too if you dont mind, mjs1988@gmail.com

thanks a bunch!
Mike

 

for thoes of you looking for the 91 camaro wiring diagrams i used to have up, you can find them here:

http://www.fastgm.com/wiring/

 

instead of starting a new thread... does anyone have this for an 89 camaro?

 

Old thread but I was wonderin the same thing as RaverRacer because I need one for my 89 camaro. Thanks.

 

could someone send me the 90 wiring diagram? I'm setting a motor in the next day or two and will need it. if someone could be so kind to send it to bbeck12@yahoo.com , I'd really appreciate it.

 

OMG!!! This is an answer to a prayer! I've been fighting with the wiring in my '91 for weeks trying to fix my windows and power hatch. Thank you sooooo much!

 

ok i hate bringing an old thread back to life but i need trickster's help i own a 1986 IROC-Z VIN (H) everything still stock and i need a copy of those wonderfull wiring diagrams you have see i am not getting any power to my fuse box right now and thats a small problem if you can help out trickster i would much appreciate it thank you my email is eriklanc@hotmail.com thank you again

 

Ok Boys, this is Bobbie, I have the same problem with my 91. It was a boring TBI, now I have a LS1 and my electrical problem has been ran through by a couple of dingle lings. I despertly need that file that everyone is talking about you know the what every wire means under the hood and for the fuse box. The ignition relays and such. My email is bobbiegarwood@hotmail.com.

Thank you

 

Hi i have a 87 irocz tpi 5.7 could you send me a wiring diagram of the three relays on fire wall driver side maf burn off maf power and fuel pump relays i want to make sure which relays go to what wires thanks so much it would really be helpful went to chev dealer today and they were no help at all thanks again

 

does anybody have these for a 92 camaro if so I could use them hardon85@hotmail.com thanks in advance

 

http://www.fastgm.com/wiring/92%20electronics%201/

http://www.fastgm.com/wiring/92%20electronics%203/

 

I'm installing a 91 dash cluster in my 84 vette - what a break to get access to these wiring diagrams.

Thank you very, very much.

Bill

 

Thanks so much for these diagrams really appreciate it.

 

I found what I was looking for Mr Dude1. Thank you so much for providing these wiring diagrams for my 91 Z/28. Does anyone know how to print just certain pages on the pdf files? I dont want to waste my paper and printer ink on V6 wiring diagrams if I dont have to.

 

i was wondering if you might be able to send me thoughs wiring diagrams please my e-mail is csgtmoody@yahoo.com i could really use them i lost half my wiring in a fire and can't find any were that has one their willing to part with not to menchen can't really afored it

 

wiring diags here: http://www.austinthirdgen.org/index.php?pid=19

 

These are awesome! Huge thanks, I'm doing an LS-swap as well

 

GOD BLESS YOU, MY FRIEND !!!

 

tigg.er1969@hotmail. plz send under hood die plz