1990 TPI 081 Ported **PRICE REDUCED**
08-19-2005, 09:17 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2003
Location: Edison, NJ
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: WCT5
1990 TPI 081 Ported **PRICE REDUCED**
IF YOU DO NOT INTEND TO BUY DO NOT WASTE MY TIME INQUIRING
The heads came off of a 1990 Formula 305TPI... I had the heads stripped and hot tanked, they were very low mile heads to begin with so the valve guides didnt need to be cut and for that reason i didnt get a valve job done. The valves are stock and all seals are new. The springs are aftermarket springs that will accomodate cams up to .525" lift. They are PBM springs. The port job was done by my buddy who is a tech at a toyota dealership and builds engines. They are port matched to mr.gasket gaskets and can be bolted on like that or can be polished for a few extra cfm. Also included are the old springs which if you dont want the new springs you can put the stock GM springs on. These heads are complete and need nothing to be put on an engine. These are a steal at $150 firm. Will ship at additional cost w/in Continental 48 states.
s24adida@yahoo.com
The heads came off of a 1990 Formula 305TPI... I had the heads stripped and hot tanked, they were very low mile heads to begin with so the valve guides didnt need to be cut and for that reason i didnt get a valve job done. The valves are stock and all seals are new. The springs are aftermarket springs that will accomodate cams up to .525" lift. They are PBM springs. The port job was done by my buddy who is a tech at a toyota dealership and builds engines. They are port matched to mr.gasket gaskets and can be bolted on like that or can be polished for a few extra cfm. Also included are the old springs which if you dont want the new springs you can put the stock GM springs on. These heads are complete and need nothing to be put on an engine. These are a steal at $150 firm. Will ship at additional cost w/in Continental 48 states.
s24adida@yahoo.com
08-19-2005, 11:03 PM
#3
Senior Member
Thread Starter
Join Date: Feb 2003
Location: Edison, NJ
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 305 TBI
Transmission: WCT5
ill get ya a shipping quote on monday... as for pics ill have them on wednesday im picking them up from my buddy's place.
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
12-02-2016 06:33 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM