:hail: ACC Carpet :hail: Got it installed, Pics inside...
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
:hail: ACC Carpet :hail: Got it installed, Pics inside...
To those of you that care here is my newest installation, My ACC Carpet. Looks good, And i was expecting Great Carpet and got Better 
Here are some pics:
I also took pics of my custom Kicks from DJSexay that I have yet to put speaker in. FBody.com has been goofy lately, so let me know if they don't show up...
OK, Fbody.com is playin games with me, so'll I attach them...
Here are some pics:I also took pics of my custom Kicks from DJSexay that I have yet to put speaker in. FBody.com has been goofy lately, so let me know if they don't show up...
OK, Fbody.com is playin games with me, so'll I attach them...
Last edited by stuart69427; Jul 2, 2002 at 12:18 PM.
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
First Pic...
Back Seat Area, without the fold-down in...
Seats are defiantly getting replaced with 4th Gen Seats when I can find a good set for cheap...
Back Seat Area, without the fold-down in...
Seats are defiantly getting replaced with 4th Gen Seats when I can find a good set for cheap...
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Driverside Floor Area
I think its this pic that the camara makes the carpet look funny, it actually all matches the kicks and console etc...
I think its this pic that the camara makes the carpet look funny, it actually all matches the kicks and console etc...
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Originally posted by Timmys88Z
them black and grey leather seats would look sweet in there!
them black and grey leather seats would look sweet in there!
The black/Grey 4th Gen seats are Cloth And yes I think I might like those in there. After I put the grey ones back there, i kinda like the combo, gotta think about that...
Trending Topics
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Looks good! Did you spray it with the 3M Scotchguard? If you didn't, you might want to spray it now before it gets too dirty. I sprayed my carpet while it was on my lawn- now my lawn never gets dirty!
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Originally posted by TomP
Looks good! Did you spray it with the 3M Scotchguard? If you didn't, you might want to spray it now before it gets too dirty. I sprayed my carpet while it was on my lawn- now my lawn never gets dirty!
Looks good! Did you spray it with the 3M Scotchguard? If you didn't, you might want to spray it now before it gets too dirty. I sprayed my carpet while it was on my lawn- now my lawn never gets dirty!
btw - ever get you quarters done?
Member
Joined: Oct 1999
Posts: 427
Likes: 0
From: Chico, CA
Originally posted by stuart69427
The black/Grey 4th Gen seats are Cloth
And yes I think I might like those in there. After I put the grey ones back there, i kinda like the combo, gotta think about that...
The black/Grey 4th Gen seats are Cloth And yes I think I might like those in there. After I put the grey ones back there, i kinda like the combo, gotta think about that...
I was talking about my black and grey 4th gen leather seats you were interested in buying...
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
No, not yet, haven't had the chance. It's only one panel, not both... the rear passenger side. I placed an order with eastwood today for some tools, and hopefully I'll get a chance to look at it this weekend. I've gotta do some suspension work on my buddy's truck this saturday... and I gotta place his safety above my quarter panel. Oh well.
Supreme Member
Joined: Jul 2001
Posts: 2,760
Likes: 0
From: Cove, Arkansas
Car: 85 Camaro SC
Engine: V6
Transmission: 700r4
Naw we dont care J/K Looks good stuart69427 
I love mine too. Now I just need some superb condition 4th gen seats, Timmys88Z do you have really good pics?
J/K Looks good stuart69427 I love mine too. Now I just need some superb condition 4th gen seats, Timmys88Z do you have really good pics? 
Senior Member
Joined: Jul 2001
Posts: 621
Likes: 0
From: Florence, MS, USA
Originally posted by u r sofa king we tah did
hey thats pretty cool, where did you get those kick panels from?
hey thats pretty cool, where did you get those kick panels from?
I also took pics of my custom Kicks from DJSexay that I have yet to put speaker in. FBody.com has been goofy lately, so let me know if they don't show up...
Last edited by CD MaroMan 91; Jul 3, 2002 at 05:02 PM.
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
I have got tons of new pictures of my interior on my webshots page. Link is in the signiture below:
There are the ones above that I added to the "Interior 1" page but the whole "Interior 2" page i took yesterday.
Enjoy...
There are the ones above that I added to the "Interior 1" page but the whole "Interior 2" page i took yesterday.
Enjoy...
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
i like
those floor mats from 1aAuto too? I know they do engraving!
man, that center console looks weird in there ( quess i am used to seeing a 4th gen in mine )
A new shifter from a firebird will fit (its a little loose, but fits) and really helps out a lot, the stock **** is just out of place IMO
those floor mats from 1aAuto too? I know they do engraving!
man, that center console looks weird in there ( quess i am used to seeing a 4th gen in mine
)A new shifter from a firebird will fit (its a little loose, but fits) and really helps out a lot, the stock **** is just out of place IMO
Joined: Jul 1999
Posts: 503
Likes: 0
From: New York City
Car: 1986 IROC
Engine: 355 Tpi
Transmission: 700r4
Axle/Gears: 9 Bolt 3.27
Damn seeing that interior makes me realize how bad I want leather interior, and how much work my interior needs. The shift indicator, the steering wheel, etc. I'm jealous!
Supreme Member
Joined: Jun 2000
Posts: 1,300
Likes: 1
From: NJ,USA
Car: 1984 Trans Am
Engine: GMPP 350 V8
Transmission: 700R4
Axle/Gears: 3.23
The carpet looks gret guys!.
I was wondering if you two had any tips. I am 1/2 through installing my ACC carpet, everything is going well, but i was wondering if anyone had any advice or helpful hints. Thanks for any help
I was wondering if you two had any tips. I am 1/2 through installing my ACC carpet, everything is going well, but i was wondering if anyone had any advice or helpful hints. Thanks for any help
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
cut all holes very carefully, if you cut the wrong place, the carpet could buldge somewhere else
make sure you don't cut to much for the center console, or else you do what TomP did and leave 1/2 showing of bare metal
I cut down the middle through the upper console so that it could overlap and it would lay right on the front hump
cut all holes before putting interior back together, went to take t-tops off to realize i forgot to cut holes for the bag monts over the hump in the hatch
let the carpet lay in the sun for a couple hours to get all wrinkles out
spray with scotchguard will interio not back in to help resist stains and dirt
make sure you don't cut to much for the center console, or else you do what TomP did and leave 1/2 showing of bare metal
I cut down the middle through the upper console so that it could overlap and it would lay right on the front hump
cut all holes before putting interior back together, went to take t-tops off to realize i forgot to cut holes for the bag monts over the hump in the hatch
let the carpet lay in the sun for a couple hours to get all wrinkles out
spray with scotchguard will interio not back in to help resist stains and dirt
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Only other tip I can think of is this... I used a sharp awl (icepick, etc) to poke thru the carpet to find holes, like the seatbelt hole, or the studs for the seats, etc.
Oh yeah; and you might want to use a torque wrench (buy/borrow/steal if you don't have one) to make sure you get those seat belt bolts torqued down to spec!!!
Oh yeah; and you might want to use a torque wrench (buy/borrow/steal if you don't have one) to make sure you get those seat belt bolts torqued down to spec!!!
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Originally posted by TomP
Only other tip I can think of is this... I used a sharp awl (icepick, etc) to poke thru the carpet to find holes, like the seatbelt hole, or the studs for the seats, etc.
Oh yeah; and you might want to use a torque wrench (buy/borrow/steal if you don't have one) to make sure you get those seat belt bolts torqued down to spec!!!
Only other tip I can think of is this... I used a sharp awl (icepick, etc) to poke thru the carpet to find holes, like the seatbelt hole, or the studs for the seats, etc.
Oh yeah; and you might want to use a torque wrench (buy/borrow/steal if you don't have one) to make sure you get those seat belt bolts torqued down to spec!!!
yes, arn't them things on there good when you first take them off, which is a good thing, cuase if go d forbid you get in an accident, you want to know that you stayin in your seat!
Supreme Member
Joined: Jun 2000
Posts: 1,300
Likes: 1
From: NJ,USA
Car: 1984 Trans Am
Engine: GMPP 350 V8
Transmission: 700R4
Axle/Gears: 3.23
Well its in and it looks fantastic, it was a custom color, and it is a perfect color match. I also had the opportunity to go through my interior and give everything the once over. I am very satisfied with it. However I do have some complaints, but I wont bore you with my madness....Ill just have to look out for an NOS carpet
Senior Member
Joined: Feb 2002
Posts: 500
Likes: 0
From: Bristow, VA
Car: 91 Z28 Convertible
Engine: 305TPI
Transmission: 700R4
Originally posted by ChevyKen
Guess I'll jump in with the pics of my interior upgrade as well. This is yet another ACC carpet:
Ken
Guess I'll jump in with the pics of my interior upgrade as well. This is yet another ACC carpet:
Ken
Ken:
Your beauty of a car make it over the ocean in good shape? Its got to be the best one in Norway. Probably all of Europe...
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
LOL, Thanks guys!
Twistopher,
I have to say that the car unfortunately have not made it here yet.... Im aggrevated to say the least!
What happend was that a US customs dude found out that he disliked one of the stamps on one piece of paper from the truck line that took the container to new york, thus everything had to be redone. That whole ordeal made the entire shipment about a month delayed, so that the container didn't leave N.Y. until two days ago... Im promised that it'll be here in about 2 weeks, but Im prepared for 3-4 more weeks, ito give room for some b@stard Norwegian customs people and truckers as well.
In the meantime Im looking at the pics every day to stay sane...LOL
Thanks again for the nice comments on my ride!
Ken
Twistopher,
I have to say that the car unfortunately have not made it here yet.... Im aggrevated to say the least!
What happend was that a US customs dude found out that he disliked one of the stamps on one piece of paper from the truck line that took the container to new york, thus everything had to be redone. That whole ordeal made the entire shipment about a month delayed, so that the container didn't leave N.Y. until two days ago... Im promised that it'll be here in about 2 weeks, but Im prepared for 3-4 more weeks, ito give room for some b@stard Norwegian customs people and truckers as well.
In the meantime Im looking at the pics every day to stay sane...LOL
Thanks again for the nice comments on my ride!
Ken
Senior Member
Joined: Feb 2002
Posts: 500
Likes: 0
From: Bristow, VA
Car: 91 Z28 Convertible
Engine: 305TPI
Transmission: 700R4
Originally posted by ChevyKen
LOL, Thanks guys!
Twistopher,
I have to say that the car unfortunately have not made it here yet.... Im aggrevated to say the least!
What happend was that a US customs dude found out that he disliked one of the stamps on one piece of paper from the truck line that took the container to new york, thus everything had to be redone. That whole ordeal made the entire shipment about a month delayed, so that the container didn't leave N.Y. until two days ago... Im promised that it'll be here in about 2 weeks, but Im prepared for 3-4 more weeks, ito give room for some b@stard Norwegian customs people and truckers as well.
In the meantime Im looking at the pics every day to stay sane...LOL
Thanks again for the nice comments on my ride!
Ken
LOL, Thanks guys!
Twistopher,
I have to say that the car unfortunately have not made it here yet.... Im aggrevated to say the least!
What happend was that a US customs dude found out that he disliked one of the stamps on one piece of paper from the truck line that took the container to new york, thus everything had to be redone. That whole ordeal made the entire shipment about a month delayed, so that the container didn't leave N.Y. until two days ago... Im promised that it'll be here in about 2 weeks, but Im prepared for 3-4 more weeks, ito give room for some b@stard Norwegian customs people and truckers as well.
In the meantime Im looking at the pics every day to stay sane...LOL
Thanks again for the nice comments on my ride!
Ken
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Originally posted by Timmys88Z
Where does one get this carpet and how much $ ?
Where does one get this carpet and how much $ ?
much cheaper than there site. You pick the color and the cut after purchase.You can buy it on there site for $230 plus ship, you make the choice....
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 1,676
Likes: 0
From: Fort Belvoir, VA USA
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
Originally posted by Timmys88Z
I get nothing.....
I get nothing.....
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
Originally posted by stuart69427
steal tom, what are you trying to promote here
yes, arn't them things on there good when you first take them off, which is a good thing, cuase if go d forbid you get in an accident, you want to know that you stayin in your seat!
steal tom, what are you trying to promote here
yes, arn't them things on there good when you first take them off, which is a good thing, cuase if go d forbid you get in an accident, you want to know that you stayin in your seat!
And Timmys88Z, maybe their website went down that day? I clicked on the 1aauto.com link above, and it worked. You can also call them at these numbers (from the webpage):
1A-Auto (carpet place)
Order line: (888)-844-3393
Information: (978)-433-3393
Fax: (240)-332-5990
WhenI bought my carpet, I actually called them, instead of using the website. I wanted to make sure they had my carpet in stock.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
