Pics of my car!
Supreme Member
Joined: Sep 2002
Posts: 2,967
Likes: 0
From: Elk Grove Village, IL
Car: 1989 TransAm GTA
Engine: One sweet modified 355 TPI.
Transmission: The kind that shifts....
Wow! Looks like a ATV with all that ground clearance! Its kinda hard to tell from the pic though. There isn't much detail in it.
Trending Topics
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Well, the intake and valve covers are just on there untill i get the motor running in the car. I'm getting a aluminum Edelbrock Performer RPM intake and some chrome valve covers to go on it. The reason there is no oil pan on it is because the one I have for it has the drain plug on the front of the deep part, and I'm thinking I would not be able to get to it when I put the motor in because it would be above or against the crossmember.
Supreme Member
Joined: Aug 1999
Posts: 3,534
Likes: 0
From: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Car: 91 Camaro 77K
Engine: 3.1 Vslick
Wow.
Looks like a lot of work.
I hope you have lots of time on your hands...
Have fun.
Looks like a lot of work.
I hope you have lots of time on your hands...
Have fun.
Senior Member
Joined: Apr 2002
Posts: 675
Likes: 0
From: Charleston, SC
Car: 1988 Pontiac Firebird, flat black
Engine: Stock 305 LO3
Transmission: Five speed
Chevy went away from orange because people could see the oil leaking!! Looks like you have alot work ahead of you, it should be interesting. Is it going to be a daily driver or a street stomper? Good luck.
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
88Bravo: It will be both a daily driver and a street stomper. The motor is built (read my sig). So, I plan on blowing away rice everyday! I need a good deal on a tranny, auto or 4 or 5-speed so I can put the 350 in it...
Senior Member
Joined: Oct 2000
Posts: 637
Likes: 0
From: Littleton, CO
Car: 85 Z28
Engine: 305 TPI (dead) -> building 355
Transmission: 27 spline 700R4 (another one died) -> T5 goin in next
Transmission
Check out the classifieds if you haven't already checked. I got a good deal on mine.
-Jesse
-Jesse
Joined: Jan 2001
Posts: 8,030
Likes: 1
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
The engine is quite orange.. a bit too orange for my tastes but as long as you're happy with it. 
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 839
Likes: 0
From: Valley Head, AL
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
redbird: Yeah, I plan to have it running after i put the transmission in it., and I can't wait!
MetalliCamaroRS:
originally posted by MetalliCamaroRS: I posted this earlier to explain the orange deal:
It wont be so orange after I get chrome valve covers and the aluminum intake, I dont like that much orange either!
MetalliCamaroRS:
originally posted by MetalliCamaroRS:
The engine is quite orange.. a bit too orange for my tastes but as long as you're happy with it.
Well, the intake and valve covers are just on there untill i get the motor running in the car. I'm getting a aluminum Edelbrock Performer RPM intake and some chrome valve covers to go on it.
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
40
Aug 21, 2015 02:12 PM