Aftermarket Product Review Provide questions and answers about aftermarket parts for the Third Generation F-Body.

new stb,,,(take a look)

Thread Tools
 
Search this Thread
 
Old Mar 3, 2003 | 12:28 PM
  #1  
jcurrieirocz's Avatar
Thread Starter
Supreme Member
 
Joined: May 2002
Posts: 1,060
Likes: 0
From: PE, Canada
Car: '81 Trans Am
Engine: 6.6L
Transmission: auto 350
new stb,,,(take a look)

hey guys I just put on the stb from FlatOut Performance. I painted it anadized blue and put the chrome sticker on it. Combined with my front springs it feels like the car is on rails no joke! heres their website: www.flatoutperformance.net.


what do you think???

Jeff C
Reply
Old Mar 3, 2003 | 12:54 PM
  #2  
Dewey316's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Sweet, i saw the one mike made while we were at the dyno, it is a nice looking peice.

his dual exaust system is AWSOME too, but i don't know if he is selling it yet, but it was the nicest system i have seen, and it sounds SWEET.

there you go mike, a nice little plug from john, you want to install your x pipe on my car now
Reply
Old Mar 3, 2003 | 08:17 PM
  #3  
MdFormula350's Avatar
TGO Supporter
 
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
nice looking!
Reply
Old Mar 3, 2003 | 09:48 PM
  #4  
Ray87Z's Avatar
Supreme Member
 
Joined: Jul 1999
Posts: 1,366
Likes: 0
From: Atlanta, GA, US of A
Car: 94 Z28
Engine: LT1 w/ headers, catback, CAI, tune
Transmission: 4L60E
Axle/Gears: 3.23s
Wow, that dual exhaust is pretty exciting. What exactly will it mount up with headers wise? Anyone heard any idea on pricing? Their other products look really reasonable, I need to snag one of those STBs.
Reply
Old Mar 4, 2003 | 02:35 AM
  #5  
Camarokid01's Avatar
Member
 
Joined: Mar 2001
Posts: 412
Likes: 1
From: Springfield,Virginia,US
that looks awsome, did you have to drill holes for it?
Reply
Old Mar 4, 2003 | 03:24 AM
  #6  
85TPI400's Avatar
Member
20 Year Member
 
Joined: Jul 2002
Posts: 475
Likes: 1
From: San Diego, California
Looks like a pretty beefy and strong brace! If they made one for a TPI car I would get one.
Reply
Old Mar 4, 2003 | 07:58 AM
  #7  
Dewey316's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Originally posted by Ray87Z
Wow, that dual exhaust is pretty exciting. What exactly will it mount up with headers wise?
mike has it hooked up to headman long tubes. it is a really sweet setup, i saw it in person, and got the chance to drive next to him on the freeway, it is amazing sounding.
Reply
Old Mar 4, 2003 | 08:15 AM
  #8  
jcurrieirocz's Avatar
Thread Starter
Supreme Member
 
Joined: May 2002
Posts: 1,060
Likes: 0
From: PE, Canada
Car: '81 Trans Am
Engine: 6.6L
Transmission: auto 350
Originally posted by Camarokid01
that looks awsome, did you have to drill holes for it?
I only had to drill four 3/8" holes in the strut towers. No big deal it worked out fine,,,they supplied the bolts and washers....and alll there braces come primed. The bar is pretty beefy and pretty light for all,,,,,,alot lighter then it looks!
Reply
Old Mar 4, 2003 | 05:51 PM
  #9  
Camarokid01's Avatar
Member
 
Joined: Mar 2001
Posts: 412
Likes: 1
From: Springfield,Virginia,US
Does he plan on selling the dual exhaust kits? and I didnt see any pictures on his website, does anyone have any?
Reply
Old Mar 4, 2003 | 10:29 PM
  #10  
Dewey316's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
i can look and see if i have some.
Reply
Old Mar 4, 2003 | 11:27 PM
  #11  
wyclefsirocz's Avatar
Supreme Member
 
Joined: Jan 2003
Posts: 1,053
Likes: 0
From: ny-lindy
Car: 1989 Iroc z hardtop
Engine: peanut LB9
Transmission: slopomatic TH700R4
it looks good, can if fit a tpi car?
Reply
Old Mar 5, 2003 | 07:32 AM
  #12  
Dewey316's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
well this is the only pic i could find

i think i heard that he was going to be doing an over the axle thing when he sells them, but you would need to check with mike.

Reply
Old Mar 5, 2003 | 11:21 AM
  #13  
jcurrieirocz's Avatar
Thread Starter
Supreme Member
 
Joined: May 2002
Posts: 1,060
Likes: 0
From: PE, Canada
Car: '81 Trans Am
Engine: 6.6L
Transmission: auto 350
Originally posted by wyclefsirocz
it looks good, can if fit a tpi car?
The one I have will not fit on a tpi car,,,,,,I think they are in the works of selling one for tpi cars tho. The brace I have only fits 82-92 f-bodys with TBI or Carb, with or without A/C, as long as the compressor is on the pass. side of the car.
Reply
Old Mar 10, 2003 | 02:35 AM
  #14  
82suped-up-coupe's Avatar
Member
 
Joined: Apr 2001
Posts: 252
Likes: 0
From: langley, bc, canada
I took alook under Mikes car today and I luv the work he is doing, I would buy it from him for my cars, very slick work, I am hopefully getting a stb from him at the very least
Reply
Old Mar 14, 2003 | 06:22 PM
  #15  
nolanr0413's Avatar
Banned
 
Joined: Jun 2002
Posts: 2,790
Likes: 1
From: New York
Car: Trans am
how come the websiter doenst work i wanna check it out and i cant find it. it just wont work. does anyone else have this problem.
Reply
Old Mar 15, 2003 | 10:40 AM
  #16  
jcurrieirocz's Avatar
Thread Starter
Supreme Member
 
Joined: May 2002
Posts: 1,060
Likes: 0
From: PE, Canada
Car: '81 Trans Am
Engine: 6.6L
Transmission: auto 350
Originally posted by nolanr0413
how come the websiter doenst work i wanna check it out and i cant find it. it just wont work. does anyone else have this problem.
do you mean Flatout Performance site???
This one works for me:
http://142.179.26.208/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Biochem
Aftermarket Product Review
9
Jul 6, 2001 11:10 PM
Stell1579
Aftermarket Product Review
10
Feb 1, 2001 10:47 AM
Joe's-88
Aftermarket Product Review
2
Nov 26, 2000 09:30 PM




All times are GMT -5. The time now is 08:36 AM.