V6 Discussion and questions about the base carbureted or MPFI V6's and the rare SFI Turbo V6.

im back yall!

Thread Tools
 
Search this Thread
 
Old Feb 24, 2004 | 09:14 PM
  #1  
aaroedg's Avatar
Thread Starter
Member
 
Joined: Apr 2002
Posts: 112
Likes: 0
From: BC Canada
im back yall!

sup averyone proly dont remember me, i had a grey 86 i had to sell fer a tercel lol. but yea, just to let yall know, i baught a 95 bird with a 3.4. it has 15,000kms (like half that in miles???). anyways im taking that 3.4 out (it pushes pretty good) and throwing in a 383. just need to find a posi rear, tranny and block. hopfully i will have the **** up to round 400-450 hp, i got 5000 to spend on it fer upgrades. payed too much fer the car though, 8500(cndn). but yea that 3.4 is fer sale after i do the swap this summer. so if anyones interested let me know. i will sell it fer 650 cndn. peace



edit: ooooops 115000kms
Old Feb 24, 2004 | 10:31 PM
  #2  
br()bert's Avatar
Supreme Member
 
Joined: Nov 2003
Posts: 1,965
Likes: 0
From: Philly
Car: 85 firebird
Engine: Pos 2.8 pulled and replaced with a 350 tpi motor converted to carb.
Transmission: 700r4, vette servo,shift kit, hayden 15"x8" trans cooler.
/
Attached Thumbnails im back yall!-wtf.jpg  
Old Feb 24, 2004 | 11:01 PM
  #3  
Project: 85 2.8 bird's Avatar
Supreme Member
 
Joined: Jul 2001
Posts: 4,461
Likes: 0
From: BFE, MD
Car: 13 Ram 1500/ 78 Formy
Engine: 5.7 / 7.4
Transmission: 6sp / TH350
Axle/Gears: 3.55 posi / 3.23


Will you be selling the entire harness, pcm, bcm, & possibley tranny along with it?

Sounds like another "perfect" swap potential. Especially for those w/o a speedo cable.
Old Feb 25, 2004 | 02:35 AM
  #4  
TechSmurf's Avatar
Supreme Member
 
Joined: Dec 2000
Posts: 2,375
Likes: 0
From: Tucson, AZ, USA
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
Thanks, brobert.. my semi-drunk butt wasn't quite prepared for that

Old Feb 25, 2004 | 06:10 AM
  #5  
RedTtop5spd's Avatar
Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 274
Likes: 0
From: Florida
Car: 99 SS
Engine: LS1
Transmission: T56
that certainly woke me up quickly this morning. if your selling it with the harness etc. etc. i'm sure you can find someone easily enough. tempting enough for me, but I have two engine projects going on right now and hardly have time for them.
Old Feb 25, 2004 | 06:34 PM
  #6  
aaroedg's Avatar
Thread Starter
Member
 
Joined: Apr 2002
Posts: 112
Likes: 0
From: BC Canada
yea i guess i am! lol. mabe i will up the price then i will get back to ya. depends on what i get in the summer. have to talk to my buddy the mechanic to see what i will be selling. engine(3.4) tranny(stock auto whatever it is) and rear end. and whatever else i wont be needing after the swap. peace
Old Feb 26, 2004 | 01:24 AM
  #7  
coolrimsatleast's Avatar
Senior Member
20 Year Member
 
Joined: Nov 2001
Posts: 827
Likes: 0
From: Tenino, Washington
Car: 89 f-bird and some others
Engine: 3.4
Transmission: 700R4
Axle/Gears: 3.42
Where you at in BC? I might be interested in that 3.4 depending on your final price (unemployed). I just wanted the engine but if the tranny will fit in my 89bird too without too much trouble that might be tempting.
Old Feb 26, 2004 | 09:01 PM
  #8  
aaroedg's Avatar
Thread Starter
Member
 
Joined: Apr 2002
Posts: 112
Likes: 0
From: BC Canada
right now im in calgary but in june im on vancouver island. peace
Old Feb 26, 2004 | 09:14 PM
  #9  
Project: 85 2.8 bird's Avatar
Supreme Member
 
Joined: Jul 2001
Posts: 4,461
Likes: 0
From: BFE, MD
Car: 13 Ram 1500/ 78 Formy
Engine: 5.7 / 7.4
Transmission: 6sp / TH350
Axle/Gears: 3.55 posi / 3.23
Originally posted by coolrimsatleast
Where you at in BC? I might be interested in that 3.4 depending on your final price (unemployed). I just wanted the engine but if the tranny will fit in my 89bird too without too much trouble that might be tempting.
the tranny will fit, trust me.
Old Feb 27, 2004 | 10:59 AM
  #10  
demicon's Avatar
Member
 
Joined: Mar 2003
Posts: 316
Likes: 0
From: BC Canada
Car: 89 Firebird
Engine: 2.8 MPFI
Transmission: 700r4
I am possibly interested in the engine and such as well. I am in the Vancouver area in BC.

650$ canadian eh? :P

Hmmm sounds tempting for sure.
Old Mar 6, 2004 | 05:34 PM
  #11  
aaroedg's Avatar
Thread Starter
Member
 
Joined: Apr 2002
Posts: 112
Likes: 0
From: BC Canada
ok i got a price the engine will not be sold till summer, when i put the new one in.

"Will you be selling the entire harness, pcm, bcm, & possibley tranny along with it?

Sounds like another "perfect" swap potential. Especially for those w/o a speedo cable."


yes selling all that, im going to a biger motor so i wont need all that. anyways , the motor has 115000kms, by summer it will have bout 120-128k round there, it has brand new manifold (onld one cracked) and i will do some tuning up if nesesary when i get the car. it drives real nice. down to business. tranny engine harness and all that **** will be 1000 firm. if you just want the engine it will be 800$. (canadian $).
Old Mar 6, 2004 | 09:21 PM
  #12  
TechSmurf's Avatar
Supreme Member
 
Joined: Dec 2000
Posts: 2,375
Likes: 0
From: Tucson, AZ, USA
Car: '99 Trans Am, '86 Camaro
Engine: LS1, Scrap
Transmission: T56, T5
Axle/Gears: 3.42 Stock ZT, 3.42 Open
When it's actually ready to sell, put it in the classifieds. Advertising in the forums is a no-no.

PM me if you have any questions.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
Mar 18, 2019 08:29 PM
db057
Tech / General Engine
4
Aug 22, 2015 08:17 PM
IroczFan
Carburetors
1
Aug 18, 2015 05:19 AM
transamgta1Khp
Electronics
0
Aug 17, 2015 12:18 PM
bbsr72
Brakes
0
Aug 12, 2015 10:44 AM




All times are GMT -5. The time now is 10:44 PM.