Hi guys, I built my own ALDL cable this afternoon (the 2 transistor one) and attempted to log data from my '165 ecu, running a chip with a 32b mask. Tunerpro finds the hardware succesfully, but I can't get any data when I go to begin logging. I tried connecting a 10k resistor across A and B on the diagnostic port, with no change. I notice that when I load the definition for 1227165 -- 160 baud, that it still shows a 6E mask. Does tunerpro RT not support datalogging from the '165 with a 32b mask, or should it still work with this definition file?

 

I answered my own question, looks like you can't use Tunerpro to datalog the 32b mask 165. I got WinALDL to work. This post can be deleted