TunerPro RT Injector Flow Rate
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 71
Likes: 0
From: chambersburg͵ pa
Car: 88 Iroc. 12.60@ 107. 1.72 60'
Engine: 350 paxton sn93 36lbs injectors
Transmission: 700r4
Axle/Gears: 9in. 390s
TunerPro RT Injector Flow Rate
Using a 32B XDF.Flipping through TunerPro i noticed that in the Scalars Injector flow rate is at @ 40psi. I have 36lbs injectors,so thats what i have put in there but ive noticed that my injectors are rated 36lbs @ 43.5psi. Now i found a conversion online and @ 40psi there rated 34.5lbs. It makes sence to me that it would be lower i just want to make sure that its right first. Never thought about it or noticed it before.Could this make much difference? Car runs pretty rich i beleive (no WB yet) but BLM/INT Proves rich.
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: TunerPro RT Injector Flow Rate
Small difference would be noticed. I just plug in what my inj are rated at for the pressure i am running. If you have 43 psi pressure, use 36 and tune around that
Thread Starter
Junior Member
Joined: Feb 2013
Posts: 71
Likes: 0
From: chambersburg͵ pa
Car: 88 Iroc. 12.60@ 107. 1.72 60'
Engine: 350 paxton sn93 36lbs injectors
Transmission: 700r4
Axle/Gears: 9in. 390s
Re: TunerPro RT Injector Flow Rate
Alright ill check fuel pressure on the car and set it at what it would flow at that pressure? Even though on tunerpro it asks what they flow at 40psi?
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 10, 2015 07:31 AM