Parts for Sale 2006 Keep it Third Gen related please!

LT1 For Sale

 
Thread Tools
 
Search this Thread
 
Old Mar 19, 2005 | 08:44 PM
  #1  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
LT1 For Sale

I got this LT1 from a 95 Interceptor. The car was totalled at 127k miles. Unfortunately I never drove the car it came from, I only came into the removal after the harness had been sold.

Block Casting #: 10125327

The previous owner claims the motor was in good running condition as it was his daily driver. I am going on this assumption but I would recommend checking the motor before installing it. Unfortunately I do not have the time right now to get into it at all. Which is why my price is fairly low considering what your getting. If the motor is stout than the motor is a steal.

I did pull off the valve covers really quick and find absolutely no sludge which is a good sign. The valve train appears extremely clean.

The motor is complete from oil pan to intake. For a few minutes I was thinking of swapping the intake onto my L98 but that isnt going to happen.

The motor is located in East Wakefield, NH and will need to be picked up from there either by the purchaser or a freight company that you send up.

I may be able to deliver the motor within a 100 mile radius for $1.00 a mile round trip. Essentially if your 100 miles from me the delivery will cost you $200. Not the most practical method but it would need to be worth my while to load it and drive it. You will need some means of getting the motor out of my truck when I get there as I will not be bringing my engine hoist with me.

My price is $450/bo.

Please email me at rpm_motorsports@comcast.net for any additional information. If you are looking for pictures I may be able to get some during the week if time permits me to drive to where it is stored.

Last edited by TKO500; Apr 28, 2005 at 02:51 PM.
Old Mar 23, 2005 | 01:21 PM
  #2  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
bump
Old Mar 23, 2005 | 05:04 PM
  #3  
Aqua FBody's Avatar
Member
 
Joined: Jan 2004
Posts: 102
Likes: 0
From: Aurora Colorado
Car: 95 Contour GL 03 KIA Spectra
Engine: 2.0 Zetec 1.8
Transmission: MTX-75 5spd
would it bolt up into an 85 rs
Old Mar 23, 2005 | 06:05 PM
  #4  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
To my knowledge it would but you would need to do your own research on that one. I can not be accountable for any interchanges.
Old Mar 23, 2005 | 06:22 PM
  #5  
86birdHT's Avatar
Member
iTrader: (1)
 
Joined: Feb 2005
Posts: 214
Likes: 0
From: Wilmington Delaware
Car: 2004 Pontiac GTO
Engine: LS1
Transmission: T56
Axle/Gears: IRS 3.46
Originally posted by Aqua FBody
would it bolt up into an 85 rs
you'll need a 460le trans if you car is an auto, otherwise it might bolt up to the T-5 if im not mistaken.
Old Mar 23, 2005 | 06:33 PM
  #6  
djcarr's Avatar
Junior Member
 
Joined: Jul 2001
Posts: 4
Likes: 0
From: Winthrop, MA USA
Are the heads iron or aluminum?
Old Mar 23, 2005 | 07:47 PM
  #7  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
The Impala and Caprice models used iron heads which is what this one is.
Old Mar 24, 2005 | 03:09 PM
  #8  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
bump
Old Mar 24, 2005 | 03:35 PM
  #9  
SLP IROC-Z's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (1)
 
Joined: Oct 2002
Posts: 1,866
Likes: 5
From: Salem, NH
Car: 1999 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23 10 Bolt
i might be interested. when can i check it out
Old Mar 24, 2005 | 03:45 PM
  #10  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
What is good for you? Its up in East Wakefield at my summer home not at my house where you came for the door.

Did you send your car to the body shop yet?

If you still have my cell number give me a buzz. Otherwise shoot me an email with yours and I'll get in touch with you tomorrow afternoon.
Old Mar 24, 2005 | 03:56 PM
  #11  
SLP IROC-Z's Avatar
Supreme Member
20 Year Member
Liked
iTrader: (1)
 
Joined: Oct 2002
Posts: 1,866
Likes: 5
From: Salem, NH
Car: 1999 Z28
Engine: LS1
Transmission: 4L60E
Axle/Gears: 3.23 10 Bolt
nah they told me to wait a little longer

ok, id ont have your number ill email you later on.
Old Mar 24, 2005 | 05:42 PM
  #12  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Just sent it in a PM.
Old Mar 25, 2005 | 02:57 PM
  #13  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
PICS POSTED

People have emailed about pictures of the motor so here they are:
Attached Thumbnails LT1 For Sale-c-documents-settings-josh  
Old Mar 25, 2005 | 03:00 PM
  #14  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Complete with flywheel
Attached Thumbnails LT1 For Sale-c-documents-settings-josh  
Old Mar 25, 2005 | 03:00 PM
  #15  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Two loose connectors on top are not included.
Attached Thumbnails LT1 For Sale-c-documents-settings-josh  
Old Mar 25, 2005 | 03:01 PM
  #16  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
All accesories are included. I have the alternator... it was just removed when pulling the motor. It does go with the motor.
Attached Thumbnails LT1 For Sale-c-documents-settings-josh  
Old Mar 27, 2005 | 06:52 PM
  #17  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
Back up for sale!
Old Mar 28, 2005 | 06:22 PM
  #18  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
ttt
Old Mar 30, 2005 | 02:26 PM
  #19  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
ttt
Old Apr 5, 2005 | 10:57 PM
  #20  
TKO500's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 608
Likes: 0
From: Pelham, NH
Car: 91 B4C, 17 C7 GS, 16 Denali DMax
Engine: LS3, LS3, LML
Axle/Gears: 3.23, 3.42, 3.23
ttt
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TX-SleeperC5
Firebirds for Sale
25
Feb 24, 2016 01:34 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 28, 2015 12:35 AM
IROCZDAVE (88-L98)
Exterior Parts for Sale
0
Sep 6, 2015 06:23 AM
raymondandretti
Exterior Parts for Sale
0
Sep 5, 2015 05:02 PM
L0tuS
LTX and LSX
0
Sep 4, 2015 11:16 PM




All times are GMT -5. The time now is 12:20 PM.