up for sale


4 part 1987 TPI intake-plenum, 2 runners, base intake--100.00$

Fuel rail, 8 22# injectors, AFPR---75.00$

stock 1987 trans am gta hydroller cam-25.00$

8x 5.7 rods(old pistons still on them)-50.00$

1-pcs rms 350 crank-50.00


YOU PAY SHIPPING EMAIL ME jpatpi@hotmail.com

 

plenum

 

base intake

 

ported

 

1.25 inch springs came off new trick flow 23* heads never used

1.250" o.d. single with damper
110 lbs. @ 1.780" installed height
300 lbs. @ 1.280" open
360 lbs. per inch rate
.480" maximum valve lift


I have the Locks, Retainers, cups for these springs. I will sell it all for 80.00$OBO. This stuff was installed but never used

 

What condition is the tpi stuff in? I am very interested!!

 

The tpi 4 part intake is off my 87 gta. I had it baked er cleaned at a shop. The intake has 118k on it. There are dents in the usual spots on the runners. The base intake is virgin unported stock. I hogged out the "bumps" in the front of the plenum. But the runners are stock also. The fuel rail is in good condition, and comes with an Adjustable fuel pressure regulator. I think Its a TPIS afpr. Cosmeticaly it is all bare aluminum that looks good for 118k. But I will put up more pics of all this stuff later on today. The engine was running when I took it apart. I am posting all the things I dont need as I near the end of the build. The injectors are stock 22#. I took them off the engine zip locked em and they are sitting in a milk crate now. Hope this answers some of your questions.

 

edit

 

stock 22#

 

all 8

 

Hey Guys, I need to sell this stuff. Make offers!!!

What I need: LT1 FUEL INJECTION MANIFOLD, 255GPH FUEL PUMP, GOOD OIL PUMP, 3 WIRE O2 SENSOR, MSD 6AL(OR6A) BOX,


WILL TRADE ANY OR ALL FOR WHAT IS MENTIONED ABOVE.

 

Also have new 7 degree locks, for 5/16th valves for sale. 30.00 bucks

 

may be interested in the tpi setup. Do you have a harness and ecm to go with it?

 

All this stuff still here. Email or PM me with offers.