Hey guys im selling my 355 from my z28, as well as my 700 R-4, heres the mod lists of each and what i would like to get for them.

355:
.030" TRW hyperetechtic .125" dome pistons
World products S/R tourwuer heads
GM Cast crank (sent out and magnafluxed/ground .010/.010)
GM "Pink" rods (once again shot peened and magnafluxed, also with ARP bolts (forget the name but there the second stage of bolts not the first if you look int he summit magazine the better bolts)
ZZ4 cam, and ZZ4 valve springs (not installed but i will include them if you would like to set them up, the ones on the heads are adequate enough for the cam)
Summit racing 1.5 roller tip rockers
High volume/High pressure oil pump

The engine was built by a GM technician thats been building engines for the last 20 years. this motor has pushed my white camaro into the 13.2x's with a stock TPI system, and a stock EPROM. It has about 9000 miles on it, and runs good as new. I am looking to get 2800 OBO but wont ship it, i might be able to meet half way somewhere for an extra cost. Let me know, and if you have any questions let me know. This is just for the long block, minus the intake, and distributor. It has always had Mobil 1 synthetic 10-30 ran in it.


The transmission:

1988 700 R-4 (auxiliary valve body)
Red eagle 9 shoe clutch pack
drilled 1-2, 3-4 apply holes
corvette servo
Extended pin
Fresh fluid (just did a trans flush about a month ago)
4L60-E internals, including sunshell

It shifts Very firm, if you manually shift it or leave it in D, if it is in OD then it is a smooth shift depending on how hard y ou are on the gas. Does not make any noise, and is a bitchin transmission, ask 8T8IROC and 1FASTGTA about it, and how it shifts, its a very well built trans. Was built by a Certified GM technician, and is put together right. I would like to get 800 OBO for the trans and will not ship it. Although i may be able to meet someone halfway to pick it up for some extra money.


I also have a set of Edelbrock T.E.S. headers that will be for sale if i sell the motor, they include the 2.5" y-pipe, and a pre cat cut-out. I would like to get about 150.00 for the set, but am open to offers. They are not coated, or painted. But there not in too bad of shape either.
Thanks for looking

Any questions let me know

 

I think Steve might also be willing to consider trades for a quad for some of this stuff

 

he is correct, i may concider trading for a quad

 

What's going on with your car? Getting out of the f-body business or what?

 

Steve's Dad has been trying to convince him to just get a pre-smog car for his 'race' car, but since Steve's family is moving Steve needed to get a more commuter car so for right now he has decided to try to sell off the motor, trans, and headers from his Z28 project.

 

yep randy's right, im hopefully going to be buying a 72 elcamino, and a yamaha blaster. If everythign goes right

 

I have YFZ450, would you like to trade? J/K

 

That was cruel

I have a 05 YFZ450 SE and two 06 Raptor 700Rs though

 

lol randys right that was cruel... lol id even trade you the motor and trans for it lol, damn

 

wanna trade for my gta ? z28dude

 

heres the link

 

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT

 

I'd love to, but my quad is my weekend warrior . On other hand, you might make Steve or Randy upset for hijacking this thread

 

Not at all, the more BS the better

 

Besides lets be honest, Steve would trade the entire car, running, for a YFZ 450

 

Well...my BFs selling his 02 Raptor 660R-its a scary fast nice quad...and I need a motor and trans for my T/A...hmmm...of course MY car would then become HIS car...

http://www.putphoto.com/83TransAmGirl/nate/

 

if you wanna see if he will make a trade, ill trade you striaght across. Lemme know

 

Ill even give you the whole car, and you can choose to register it, or use it for parts, its a 91 z28

 

Interesting turn of events...

 

Hmm...Ill have to talk to him tonight! Somedays he just want to get rid of it, somedays he talks about his next plans for it-but at least he finally put a "For Sale" sticker on it!

How much is left of the car? is it a full car? Thats kinda why hes selling it, he needs a street legal car(that or the money to get his license back! But considering he just missed another court date-Got caught on his Quad driving down the street-I dont think he'll be getting his license back anytime soon!) post/PM me with the details!

Ill Definalty run this past him...

 

ive decided to keep the car, and finish it. So nothings for sale anymore, unless someone wants to buy the entire car for 3500 let me know

 

Marry him and you can say it's "our" car.

Lon

 

or argue over who gets which half

 

You know that almost works too...then "his" quad becomes "our" quad I like it!

Of course we would have to choose which Blazer to keep, 2 gas guzzling Blazers is too many! You know, hes been talking about stripping his Blazer and putting the crate motor and all the suspension mods on mine...

 

i already got that planned...

the driving half is mine, the matainance half is his!!!

 

The exterior cleaning and detailing of all the vehicles including the Quad can be farmed out to Garage Girl Detailing. So have you set a date yet?

Lon

 

 

Wow I never wanted a quad until I saw that thing... Ill trade you that short block I have for it. Forged everything. No heads though. Sold those off. I just bought a new avalanche so the Camaro sits. When I move in January it will become the sanding and priming project. Should be fun.

 

Quads are a blast!!! Really helps to not miss drag racing as much, plus you can always drag in the dirt, sand, snow, mud, whatever

Plus it's bitchen when you can ride in your own backyard

 

I have never seen anyone so **** when it comes to a vehicle thats job is to play in the dirt! Nate will spend 3 hours detailing it to show condition and when he's done, he'll hop on it and head up the street to the canyon into the dirt, race around for and hour or so and come home and detail it all over again! (he also details his riding boots, chest guard, and helmet!!!)

...Ill be out sitting with him while he cleans/works on the quad and Ill offer to help dry it or something, and Ill end up detailing it anyways cause I cant stand to watch him use the wrong cleaner on the wrong parts! Im begining to think it intentional, I didnt think he was THAT smart!(Best way to get dad to do something around the house- Start it yourself, but use the wrong tool/method, act like your having difficulties, screw something up...and before you know it he'll push you out of the way and start doing it the "right" way...grab a drink and a seat, and watch him finish the job! LOL! )

"Set a date yet?" marriage? No, but we talk about it alot and one day we will, no rush! Besides he just got divorced a few years ago and Im only 21!!!(granted my dad married my mom when he was 21, and I went to 2 this year and have 3 weddings to attend for friends my age next year...eek! I dont feel old enough to be married yet!!!)

 

Actually he's gone back to deciding to keep it again for awhile...he decided hes only going to sell it for cash cause he wants to buy the new Bombarbier Outlander 800EFI 2-up so we can ride together more(its a removable 2 seater, so I actually have a seat)...It would be nice to have a legit place to sit(and hold onto!) when riding with him Plus I can take it out on my own and run trails like I like to, plus its got the *****(800 HO EFI-57hp!) for him...
http://www.bombardier-atv.com/en-US/...800/Models.htm


I cant believe he's thinking of selling his baby so we can have something I can drive and so I can ride with him more...wow!

 

Yeah, I like to think his quad keeps him out of trouble in other things! That 660R will pick up the wheels in 1st, 2nd, and 3rd and thats WITH his 280+lb self on it-no problem! Thats why I dont drive it, and why he doesnt let anyone else drive it!

Thats our goal, to own a place with plenty of land...need room for the shop, ATV track, RC track, bike jumps, and maybe some trails/obsticals for our K5s(he wants to build a 4x4 course out here since there arent any in SO-Cal-but that will take much more land!)...I want to be able to run my quad around my property/fire up racecars/play loud music, and get NO complains from neighbors-I dont even want to be able to see my neighbors!

 

NICE! Where do you ride? We should have a car club ATV trip! theres a couple of guys across different boards(some of my Truck boards too) that have some dirt toys...that would be a fun trip!

 

Actually I ride right in my backyard! I loved from Fontana out to Cherry Valley and live on an acre. We found kind of a plow on the land that can be pulled by quads so we kind of grated ouselves a little track. After the rains and continual riding, we have a pretty nice little circuit going. I am planning on trying to make it to Dumont for Thanksgiving, though that might fall through but at least maybe a quick trip to saddle springs during the thanksgiving holiday and then maybe Dumont during the Christmas break.

 

See Below...

 

and you wanted 1500$ for your short block?

i maybe wrong.. but i think that quad is worth a liiiiiiiiiittle bit more than $1500..

 

 

I tried to edit and quoted myself, sorry

 

Im selling the short block just to get rid of it fast. There is more than $2300 in BRAND NEW parts on the short block, not counting the $2000+ in just machine work. If I dont sell it ill keep it and find some use for it.