Do you still have the clutch resevoir with hose to master $20? Is the cap for it solid?
Where in Indiana are you? The cap on my reservoir fell apart this morning.

 

its sold already sorry

 

How much for the 91-92 third brake light shipped to 18914? Is brake upgrade sold yet? If not pm me pics and price.

 

any chance you have the oil dipstick TUBE that fit the stock 305/350 block? my tube is loose and wiggles all around.. i haven't pulled hte header off yet to see how it's held int here. but if its damaged and loose, ill need a new dipstick tube. how is it held in anyway? press fit?

 

Do you still have any parts left. You posted this up a year ago and probably dont have much left. Im interested in the wiring harness.

 

The brake light is gone,

I have machined hubs for the upgrade but thats about it

Randy

 

I dont have anymore wiring harnesses sorry

still have lots of parts though but yeah this thread is pretty old

 

its a snug fit in the block, and then bolts to the manifold I dont have any tubes they go with the engines

 

Do you have any of the oil pressure sender fittings that thread into the top rear of the block? Accel ignition module for 87 TPI, pair of regular hood struts?

Thanks

 

I have good hood struts, but the other stuff i dont

 

how much 4 the aluminum driveshaft shiped to Lancaster, CA 93535 and is it a 1LE

 

its gone sorry

 

still hav the coolant resevoir?

 

gone man sorry

 

how much for the 3rd break light lens that goes on the spoiler?...and for the manual pedals?...shipped to 90650?...if u still have this items...

 

do you still have the roller lifters/dog bones/spider (with bolts?)
if so, what kind of condition are the lifters in, and do you know how long it's been since they were running?

also, might you have a PROM for a 730 ecu?

 

How many miles on the injectors? Why 6 ? did 2 fail? Thanks, Paul

 

cause i lost two of them.... 6 is all i have left.... the car had 100k when removed... and that was a couple years ago

 

how much for the 3rd break light lens that goes on the spoiler?...and for the manual pedals?...shipped to 90650?...if u still have this items...

 

hi how much for the torque arm th350 adapter shipped to v1x1v4 canada?

 

any lower shifter boots left?

 

yes have a few floor boots left

 

Looking for a few different parts. Alum Driveshaft, 36mm hollow sway bar, spindles, serp brackets or possibly the older style that uses the serp style on the alternator? Let me know. Can do local pickup. Thanks

 

do you have any 5 speed shifter plates for a 85-92 trans am with power windows?

 

Has the A/C delete sold yet? If not im interested. Thanks

 

most of the stuff in this thread is gone for the most part... its an old thread

 

Hey...I bought a right ground effect off of you last summer(met you in Trafalgar). I need more stuff and was wondering if you could help me out.

I am putting AC back on my car and I need the following pieces...

1) Hard line that goes between AC Condenser and Orifice Tube. Mine the fitting has been damaged and I need to replace it.

2) I need the rubber pieces that hold the condenser on top. The lowers are 1 piece with the radiator...the tops have disappeared over the years.

If you can help me out, I'd appreciate it....

Thanks,

 

i think i have the ac lines.. not sure about the rubbers but i might have those too

randy

 

parking lamp for my 86, must be amber, wonderbar, rear view mirror, must be clean!!,gauge lens, center cap for my 15" alum rims( pic in sig)

 

I need that fron license plate holder. How much to ship to 78572?

 

do you by chance have a cat for a stock ypipe?

 

do you still have the ls1 heads by chance and how much shipped to 84097?

 

Are any of the Torque Arm Bracket for a T5 transmission?

Joe

 

no they arent

 

Do you have a fuel tank or sending unit??

 

still have TH350 Torque Arm bracket. How much shipped to 74429. Thanks..

 

How much shipped to 32174 for just the smog/ac serp bracket?

 

how much the seat belt assembly shipped to 93433?