SBC stuffage for sale or trade:
02-14-2007, 08:03 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
SBC stuff for sale or trade UPDATED
SBC/G-body stuff for sale or trade:
Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for.
JohnNeville@Gmail.com / 856 905 1908 CELL
http://s44.photobucket.com/albums/f11/SS86/?start=all
$2000--Hand ported Dart Pro 1 heads flowing over 300@.700. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc.
$300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use
$250--Crower solid roller lifters 290-66200
$200--8" Fluidampr internal balance 350
$150--Schneider roller cam 33350. .630" lift, 282@.050" duration, 322 adv duration, 112 LSA, 4000-8000rpm
$100--New Comp 7972 pushrods
$75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be.
$50--TCI circle track valvebody
$25--Stock style servo and cover from TCI powerglide
$25--87 Monte carlo LS front bumper cover
$25--Steel powerglide pan
$25--Stock Malibu front sway bar
$25--Stock Malibu upper rear control arms
$25--Stock Malibu power steering box/pitman arm
SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts
SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc...
SOLD--MSD digital 6
SOLD--Glasstek pin on (10 dzues) 5" Malibu hood
SOLD--$200--6 1/4" Fluidampr internal balance 350
SOLD--Stock 3.73 posi 8.5" gears, posi, axles
SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets
SOLD--Smooth 78 Malibu front/rear bumpers
SOLD--Edelbrock RPM spread bore dual plane intake
SOLD--Cloyes hex-adjust double roller with tensioner
SOLD--Circle track valve covers with dual breathers
Used unless it says otherwise. Open to package deals and trades. Shipping is not a problem. I'm in 08080 NJ. May add pictures later, but for now you can cruise photobucket and you'll most likely find what you're looking for.
JohnNeville@Gmail.com / 856 905 1908 CELL
http://s44.photobucket.com/albums/f11/SS86/?start=all
$2000--Hand ported Dart Pro 1 heads flowing over 300@.700. Coated chambers, Manley severe duty valves, cryo treated springs, 1.7 comp magnum rockers, girdles, cast Chevrolet valve covers, etc.
$300--th350 tranny with TCI shift kit and I believe a manual valve body. Shifted fine when last in use
$250--Crower solid roller lifters 290-66200
$200--8" Fluidampr internal balance 350
$150--Schneider roller cam 33350. .630" lift, 282@.050" duration, 322 adv duration, 112 LSA, 4000-8000rpm
$100--New Comp 7972 pushrods
$75--78 Malibu bare frame. Not bad, but some body mount holes in the rear aren't as round as they used to be.
$50--TCI circle track valvebody
$25--Stock style servo and cover from TCI powerglide
$25--87 Monte carlo LS front bumper cover
$25--Steel powerglide pan
$25--Stock Malibu front sway bar
$25--Stock Malibu upper rear control arms
$25--Stock Malibu power steering box/pitman arm
SOLD--$2000--LS1 with 70K and LS6 intake. No ECM. Needs a few parts
SOLD--010 high nickel SBC 350 block. ARP studded 4 bolt billet mains, screened, plugged, decked, line honed, .030" over, coated bearings included, etc...
SOLD--MSD digital 6
SOLD--Glasstek pin on (10 dzues) 5" Malibu hood
SOLD--$200--6 1/4" Fluidampr internal balance 350
SOLD--Stock 3.73 posi 8.5" gears, posi, axles
SOLD--67-69 F-body/68-74 Nova 1 5/8" Hedman headers/Dynomax Ultraflo bullets
SOLD--Smooth 78 Malibu front/rear bumpers
SOLD--Edelbrock RPM spread bore dual plane intake
SOLD--Cloyes hex-adjust double roller with tensioner
SOLD--Circle track valve covers with dual breathers
Last edited by ss86; 04-25-2007 at 02:03 PM.
02-15-2007, 08:01 AM
#2
Member
iTrader: (2)
Join Date: Jan 2006
Location: Lansing, IL
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Car: 64 Impala, 86 Z28 Camaro, 00 C5 FRC
Interested in the msd digital 6. How's the condition? How long did you use it, and finally paypal, and shipping quote to 60438 please.
Thanks
-richard
Thanks
-richard
Trending Topics
03-08-2007, 02:38 PM
#22
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
It says 010 G10 in the timing chain area. J718 on a tag on the passenger side of the tranny mounting face and the number is 3970010. It's a high nickel block like I said, I just can't tell the exact year.
03-11-2007, 10:53 AM
#24
Senior Member
Can i see a pic of the block? I looked in your photobucket, but dont know wich is wich, and if its even there
03-11-2007, 11:03 AM
#25
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
Good point! Sorry about that!
This is the album with that block. It's all disassembled now, but it comes with the bearings I used for mock up and I still have much of the timing stuff listed above. I can make a package deal perhaps???
http://s44.photobucket.com/albums/f1...ock/?start=all
This is the album with that block. It's all disassembled now, but it comes with the bearings I used for mock up and I still have much of the timing stuff listed above. I can make a package deal perhaps???
http://s44.photobucket.com/albums/f1...ock/?start=all
03-23-2007, 08:44 PM
#27
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2004
Location: South Jersey
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 78 Malibu
Engine: 357
Re: SBC stuffage for sale or trade:
I think I'm going to keep the distributor and block to build a 383, but the rest is up for grabs. Add an LS1 to the list as well for $2000.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
dimented24x7
Tech / General Engine
4
09-06-2015 03:51 PM
raymondandretti
Exterior Parts for Sale
0
09-05-2015 05:02 PM
UMI Performance
Sponsored Vendors
0
09-04-2015 09:22 AM