Parting out 1991 Trans AM
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Parting out 1991 Trans AM
Body and structure parts are in mint condition.
Everything is for sale, from front to back
Car is complete right now, but dissassembled.
No rust anywhere.
Let me know what you need. I'd prefer local pickup on the big items.
Located in Knoxville TN.
Brian
Everything is for sale, from front to back
Car is complete right now, but dissassembled.
No rust anywhere.
Let me know what you need. I'd prefer local pickup on the big items.
Located in Knoxville TN.
Brian
What do you want for the two piece taillights?
You can PM me, or email me at:
WarbirdTA@hotmail.com
Thanks,
George
You can PM me, or email me at:
WarbirdTA@hotmail.com
Thanks,
George
Looking for the following items,
passenger side turn signal assembly and bracket
center console wiring
driver door cup holder in grey if you have, also the trim sorrunding the inside door handle
center console door
please post on here or pm me the prices and if you have
Thanks Aaron!!
passenger side turn signal assembly and bracket
center console wiring
driver door cup holder in grey if you have, also the trim sorrunding the inside door handle
center console door
please post on here or pm me the prices and if you have
Thanks Aaron!!
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
I believe i have all of that, i will get back with you in the morning on pricing.
Trending Topics
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Looking for the following items,
passenger side turn signal assembly and bracket
center console wiring
driver door cup holder in grey if you have, also the trim sorrunding the inside door handle
center console door
please post on here or pm me the prices and if you have
Thanks Aaron!!
passenger side turn signal assembly and bracket
center console wiring
driver door cup holder in grey if you have, also the trim sorrunding the inside door handle
center console door
please post on here or pm me the prices and if you have
Thanks Aaron!!
passenger side turn signal,center console wiring with mirror switch, trim for inside door handle including the bird(both doors), and good condition console door. will do for 75 shipped.
----------
No rear sorry
not sure what your looking for, the gfx that are on the front behind the nose i will do 100 shipped. they are excellent condition. what other gfx you looking for?
sorry, no good rubber here
Last edited by SL0WLS1; Mar 6, 2007 at 04:53 PM. Reason: Automerged Doublepost
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Basically i have a whole 91 trans am.
all gfx in good condition
front and rear nose
both headlight buckets with good motors, not stripped.
front bumper support.
good doors
if someone was wanting to convert to a 91-92 TA/GTA, i could hook them up!
all gfx in good condition
front and rear nose
both headlight buckets with good motors, not stripped.
front bumper support.
good doors
if someone was wanting to convert to a 91-92 TA/GTA, i could hook them up!
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Here is a link to some pics
http://s47.photobucket.com/albums/f1...itecarpartout/
http://s47.photobucket.com/albums/f1...itecarpartout/
Banned
iTrader: (4)
Joined: May 2002
Posts: 1,014
Likes: 4
From: KY
Car: 1991 FORMULA
Engine: ZZ4 + LT4 HT CAM 430HP
Transmission: 700-R4 COMING T56
Axle/Gears: 9" 4.56's (COMING)
if ya havent sold the taillights, ill buy them from ya, and i can come and pick them up if needed! let me know what ya want for them
Banned
iTrader: (4)
Joined: May 2002
Posts: 1,014
Likes: 4
From: KY
Car: 1991 FORMULA
Engine: ZZ4 + LT4 HT CAM 430HP
Transmission: 700-R4 COMING T56
Axle/Gears: 9" 4.56's (COMING)
i can meet you at lns motorsports sunday just name the time! or hotrod barn, i know where hotrod barn is, but i wanted to talk to lns guys while im there, btw, i am on hpt alot! we had carcky's black formula on our site for a while
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
LNS would be fine.... give me a call 803-8488
Any idea what ever happen to cracky's bird?
Any other parts you need, i'm dealing with a whole car here....
Brian
BTW, i'm including the harness with it
Any idea what ever happen to cracky's bird?
Any other parts you need, i'm dealing with a whole car here....
Brian
BTW, i'm including the harness with it
Last edited by SL0WLS1; Mar 7, 2007 at 09:38 AM.
parts for sale
how much for the full suspension.......need panrod bar, lower control arms, headers, front sway bar and what kinda of drop do the springs have?
if you can give me prices on these that would be great. would probably end up picking up....im in kansas city kc
thanks
geoff west
think you could give me your number
913-406-7315
if you can give me prices on these that would be great. would probably end up picking up....im in kansas city kc
thanks
geoff west
think you could give me your number
913-406-7315
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Yessir i am
They are the pbr brakes, front and rear with brackets and good condition pads. They also still have the lines attached.
250 shipped.
These were on my 3rd gen. they are from a 98 + 4th gen camaro
They are the pbr brakes, front and rear with brackets and good condition pads. They also still have the lines attached.
250 shipped.
These were on my 3rd gen. they are from a 98 + 4th gen camaro
Last edited by SL0WLS1; Mar 7, 2007 at 01:08 PM.
Member
iTrader: (9)
Joined: May 2006
Posts: 153
Likes: 0
From: Ruston. WA
Car: 88 IrocZ Vert
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.73
how much for the front bumper cover with both gfx side pieces?? SHipping to 80233. I'm pretty sure greyhound will ship the front bumper cover..
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
75 shipped,complete with goodmotor and bulb
----------
75 shipped,complete with good motor and bulb
----------
75 shipped,complete with good motor and bulb
Last edited by SL0WLS1; Mar 7, 2007 at 09:05 PM. Reason: Automerged Doublepost
Banned
iTrader: (4)
Joined: May 2002
Posts: 1,014
Likes: 4
From: KY
Car: 1991 FORMULA
Engine: ZZ4 + LT4 HT CAM 430HP
Transmission: 700-R4 COMING T56
Axle/Gears: 9" 4.56's (COMING)
i don't know what happened to crackys formula, i know he wanted to sell it cheap, man was it a sweet looking car!
what time ya want to meet?, earlier the better, wife wants to go to a flea market or somthing down there....
thanks for throwing in the harness bro
adam
what time ya want to meet?, earlier the better, wife wants to go to a flea market or somthing down there....
thanks for throwing in the harness bro
adam
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Make an offer on the front bumper cover. I will have to check on shipping. thanks
brian
brian
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
Looking like just the nose, i also have the bumper support if interested.
Foglights are in OK shape, only one turn signal left.
Here are the pics. Make offer if interested.

Here are the pics. Make offer if interested.

Banned
iTrader: (4)
Joined: May 2002
Posts: 1,014
Likes: 4
From: KY
Car: 1991 FORMULA
Engine: ZZ4 + LT4 HT CAM 430HP
Transmission: 700-R4 COMING T56
Axle/Gears: 9" 4.56's (COMING)
hey slowls1, great meeting you and cracky today, taillights are awsome, and thanks for meeting me there!
everyone, slowls1 is a good seller!
p.s left a good remark for ya in classified feedback bro!
everyone, slowls1 is a good seller!
p.s left a good remark for ya in classified feedback bro!
Junior Member
Joined: May 2005
Posts: 6
Likes: 0
From: USS Harry S. Truman CVN-75
Car: 1991 Firebird
Engine: 305 TBI
Transmission: T5
I am interested in the PBR calipers and the moog steering rack. You said the calipers are for a forth gen, but will they fit on a stock third gen rotor? Also, can I have some closer pics of the rack?
Joined: Oct 2004
Posts: 2,086
Likes: 0
Car: 2012 Corvette
Engine: LS3
Transmission: TR6060
Looking at the pictures, I can't tell but does this car have a power antenna? Also, how much do you want for the front sway bar? Does it come with the bushings/end links?
Thread Starter
Junior Member
iTrader: (2)
Joined: Sep 2005
Posts: 84
Likes: 0
From: Knoxville TN
Car: 91 Pearl white TA WS6
Engine: LT1
Transmission: 700R4
Axle/Gears: 4th gen 3.23 rear
no power antenna, and the swaybar has a pending sale.
wing and ps pump is gone.
thanks
brian
wing and ps pump is gone.
thanks
brian
Supreme Member
iTrader: (4)
Joined: Apr 2005
Posts: 1,124
Likes: 0
From: Cleveland, Ohio
Car: 1992 Firebird
Engine: 3.1L V6
Transmission: 5 Speed Manual
Axle/Gears: 3.42 Peg Leg
Mint Center Console? (Lower Half)
If so, can I get pics and price shipped to deadnightwarriors@yahoo.com
If so, can I get pics and price shipped to deadnightwarriors@yahoo.com
Member
iTrader: (2)
Joined: Feb 2000
Posts: 339
Likes: 0
From: North Battleford, Saskatchewan, Canada
Car: 91 GTA & 92 GTA & 92 GTA
Engine: 305 TPI & 350 TPI & 350 TPI
Transmission: 700R4
Axle/Gears: 3.42 & 3.23 & 3.23
Do you happen to have a tire inflator bolt that looks like the one in the pics below?


Also, do you have a bucket of screws and bolts from the disassembly?


Also, do you have a bucket of screws and bolts from the disassembly?
Supreme Member
Joined: Dec 2000
Posts: 1,536
Likes: 0
From: Springfield, MO, USA
Car: 1986 Trans Am, 1991 Firebird
Engine: 355 TPI, 3.1L V6
Transmission: 700R4 in both
Re: Parting out 1991 Trans AM
Does the car have the "snowflake" rims? If so, what condition are they in and how much do you want for them?
Supreme Member
iTrader: (2)
Joined: Jul 2003
Posts: 3,205
Likes: 0
From: Dallas, TX area
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
Re: Parting out 1991 Trans AM
Is the hood still available?





