Doing some spring cleaning and no longer need my old 9 bolt rear end.

the rear end came out of my 1989 Irocz L98 car.

DISK BRAKE SETUP COMPLETE:
SOLD Open to offers
see pics!


Its a 2.77 posi rear end... posi works and gears are in good condition. i'm asking 45 plus shipping. approximately 140K miles on the posi but majority highway miles. posi worked fine before i upgraded to 3.27's


9 bolt axles...both in good condition. SOLD

Whole 9bolt rear end housing with LCA brackets installed. make offers. possibly could ship

would you take $100 + shipping for the brakes to 99114 WA?

also interested in the posi cones if you'll seperate and if its still got plenty of meat left...

PM with a total price including shipping for the brakes to 31763 (south GA). I am very interested in them.

Re: 9-bolt; Could you clarify please? You state in the same sentance 2.77 gears & upgraded 3.27's. Did you switch the 9 bolt gears or are you talking about the new rear end you installed?
Nitro

its an original 9 bolt rear end that came with 2 series carrier and 2.77 gears. i took that posi carrier and gears out and had 3.27 gears on a 3 series carrier put into the rear.

now i have a 10 bolt 4th gen fbody rear end so i dont need the 9 bolt anymore


but sell pending... first come first serve so Brisk is in line first

I'm a bit slow on the uptake of understanding how we can switch parts around in our 9-bolts, so I thank you for explaining that switching the innards is possible to a 3.27 gear set up. Let me know if the initial buyer dosn't come through. I've got cash/Paypal . Nitro

dont you need to upgrade your seires 2 carrier to a 3?

yes, switching from 2.77s to 3.27's or higher requires a new carrier. 2.77's have a 2 series carrier. 3.27's and up have a 3 series carrier.

If you still have the brakes, put me in line for them.

Ditto plus shipping to 85745. I'll pay $120 plus shipping.

Sorry i have a buyer for the brakes. Thanks!

update:

still have 2.77 gears and posi...

still have 9 bolt housing and the axles

i need the axles shipped to 31088, what's the best you can do?

pm sent

How much for just the posi, shims, etc? And will they work in a series 3 carrier? I've not done much with these rears.

I'm not sure if the internals of a 2 series will swap to a 3 series but if they do you can look into that.

i remember selling my broken 3 series to a guy that was gonna try to put in 2 series parts.. Not sure if it ever worked or not.

yes they swap fine, the internals are the same.

i haven't forgotten about you Orr, i'm just busy as hell. i'll get some cash to you some way for those axles.

take your time man, no hurry here. i have them and they aint goin no where fast

Shipping to 72120 for the posi and shims? I'm assuming it's 45 for the part, and I'll just use the ring as a wall decoration.

Orr, i got word from my buddy that we'll be doing a money order via snail mail. pm me your physical address if you don't mind

yes, its 45 for the posi and ring/pinion, and the shims i have.

pm sent

Updated... axles have been sold

2.77 posi/gears and the housing are left