Parting out 91 Camaro rs convertible
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Parting out 91 Camaro rs convertible
I am once again parting out my 1991 Camaro convertible. There is no engine or trans left, fenders are trashed and it does have the 85-90 style front spoiler. The car itself has a salvage title. Please check out the following link for pictures and prices I have for sale now. http://s243.photobucket.com/albums/f...arage%20stuff/ I also have numerous other parts for sale,interior stuff, suspension, rear end BW 9 bolt posi 3.27 disc brake (dissembled) and the shell. I am asking 250.00 for the shell and title. I need most of this stuff gone by this time next month otherwise the shell will go to the crusher, I need the room in the garage. Please email me or pm me for your questions, I do not frequent this post often as I check my email and pm's. I will not ship any large items what so ever.
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
I posted new pics on the photobucket link. And also the small items I will ship, and ALL PRICES ARE OBO. If it is to high make me an offer, need to get this stuff gone.
Re: Parting out 91 Camaro rs convertible
do you have the seat belt covers that go on the sides were the tonneau cover ends. also i need the locking mechanism that latches the top to the tonneau cover the one that goes on the middle. thanx
Junior Member
iTrader: (2)
Joined: Nov 2003
Posts: 81
Likes: 0
From: Escondido, CA
Car: 1987 Camaro IROC
Engine: V8 5.0L TPI
Transmission: 700R4
Axle/Gears: 10 Bolt
Re: Parting out 91 Camaro rs convertible
power window switches with wiring harness??? let me know if you have these... also power door lock relay and wiring harness too... prices shipped to CA 92028, thanks andrew
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
----------
I will have to look at the wiring to see if it is all there and not cut up, I didn't cut too much wiring and I don't think I cut the door wiring but I will check on sat. for you.
Last edited by AaronIROCZ; May 22, 2008 at 10:33 PM. Reason: Automerged Doublepost
Re: Parting out 91 Camaro rs convertible
what year is the car, do you know if the locking mech fits an 89 can you send me pics. madridalan1@yahoo.com thanks let me know what else do you have
Re: Parting out 91 Camaro rs convertible
what year is the car, do you know if the locking mech fits an 89 can you send me pics. madridalan1@yahoo.com thanks let me know what else do you have
Trending Topics
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
what year is the car, do you know if the locking mech fits an 89 can you send me pics. madridalan1@yahoo.com thanks let me know what else do you have
Wheels and tires are sold!!!!!!!!!!!!!!!!!!!!
Senior Member
iTrader: (28)
Joined: Jun 2002
Posts: 966
Likes: 0
From: New Jersey
Car: 89 formula convert looks like a 92
Engine: original 350 tpi engine
Transmission: auto
Axle/Gears: 373 10 bolt with LS1 brakes
Re: Parting out 91 Camaro rs convertible
interested in the 2 metal plates the are pop rivited to the window frame where the top lockes down,
also in search of the top lock slider, cable and pin with all the hardware, the car i have is all missing, its where the rear of the top locks down when the top is up,
also in search of the top lock slider, cable and pin with all the hardware, the car i have is all missing, its where the rear of the top locks down when the top is up,
Re: Parting out 91 Camaro rs convertible
I got the money for the locking mech do you have a paypal account. i would like a pic if you have one just want to make sure is the correct part i need thanks. madridalan1@yahoo.com
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
Please clairify what locking mech you are talking about?? The top locking mech that locks it to the tonneau cover, or steering column lock, door locks, or trunk lock???
Ted I will look into getting the parts you asked about.
Ted I will look into getting the parts you asked about.
Re: Parting out 91 Camaro rs convertible
the one that goes on the tonneau cover, the one that locks the top to the tonneau cover when the top is up. do you know the one i am talking about?
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
Sorry I didn't notice anybody replied to this thread lately, A-arms I will take 50.00 shipped ups ground.
----------
I will have to get a quote on that on monday, it is rather large so I dont think ups will take it but I will check.
----------
I will have to get a quote on that on monday, it is rather large so I dont think ups will take it but I will check.
Last edited by AaronIROCZ; May 31, 2008 at 01:34 PM. Reason: Automerged Doublepost
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible
do you still have any of the interior trim pieces.specifically the piece that covers the latches for the top and makes for a clean look..I have a 91 bird but I'm sure they are the same...price and shipping to 38301...thanks,Dave
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
Still have alot of parts left, top frame, trunk lid, tonneau cover, doors, shell, most interior parts, Iroc sway bars and suspension parts, flat hood, posi rear end ect, make offers on all parts, the very large parts will be around 100-150 shipped via truck freight, so local sales would be best. Most parts will be scraped if not sold by middle of June. Also have front and rear bumper covers, ground effects minus door effects, and front spoiler.
Last edited by AaronIROCZ; Jun 3, 2008 at 10:25 PM.
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
Sorry I missed your post, are you talking the piece that goes across the front by the windshield, here is a pic of what I have if it is then yes I still have it, if not let me know what exactly you are looking for or where it is located on the car I will look for it.
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible
I believe thats it..the piece just above the windshield that the tonneau latches protrude from I dont have my car or I would take a pic...pm me what you want for the piece in the pic
Re: Parting out 91 Camaro rs convertible
Still have alot of parts left, top frame, trunk lid, tonneau cover, doors, shell, most interior parts, Iroc sway bars and suspension parts, flat hood, posi rear end ect, make offers on all parts, the very large parts will be around 100-150 shipped via truck freight, so local sales would be best. Most parts will be scraped if not sold by middle of June. Also have front and rear bumper covers, ground effects minus door effects, and front spoiler.
Thanks for all, Gregor.
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
I can do 80 but shipping would probably be around 100.00 since it can't be ups'd it would have to be truck freighted. FYI I can get a exact quote once I get your zip code.
Re: Parting out 91 Camaro rs convertible
I assumed shipping would be costly. How much to a business address at 40504? If it makes a differance I've noticed that a lot of the frames on ebay are shipped via ups. Also if the top is trash and your willing to pull it off it would save on shipping. I'll take it either way. By the way, are the latches still on the frame? Thanks for all, Gregor. (859)321-8042
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible
hey bro I got you pm I'll respond now thanks
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible
do you still have the interior pieces that go beside the rear seats with the rear speakers and armrests in..I saw the pic...
Senior Member
iTrader: (3)
Joined: May 2005
Posts: 563
Likes: 0
From: Detroit, MI
Car: 1991 Z28 Vert
Engine: LT1 350
Transmission: T56 6 Speed
Axle/Gears: 3.42 LSD
Re: Parting out 91 Camaro rs convertible
How much for the top frame. Any pics? What type of condition is it in?
Thanks,
Jay
Thanks,
Jay
Senior Member
Joined: Apr 2003
Posts: 500
Likes: 0
From: Christchurch, New Zealand
Car: 1989 Trans Am
Engine: 1989 305 TPI
Transmission: 700-R4
Axle/Gears: 2.77 10 bolt
Re: Parting out 91 Camaro rs convertible
Do you have a fuel sender from the tank available for sale?
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible
Money Sent...
Thread Starter
Joined: Feb 2001
Posts: 1,415
Likes: 6
From: Tomball Texas
Re: Parting out 91 Camaro rs convertible
I do, it is for a tpi car, I can do 50 shipped. Let me know if this works or not.
----------
I have a pending sale, if I do not hear back from him by next week I will give you the opportunity to purchase it. I spoke to my ups guy and he stated that it is too large for them to ship. I priced vitran express for the other guy and it was 191.72, I would expect the same to MI. If you find a cheaper freight company by all means let me know and if they give you a freight quote number please allow me to use that to get you the best price.
----------
I have a pending sale, if I do not hear back from him by next week I will give you the opportunity to purchase it. I spoke to my ups guy and he stated that it is too large for them to ship. I priced vitran express for the other guy and it was 191.72, I would expect the same to MI. If you find a cheaper freight company by all means let me know and if they give you a freight quote number please allow me to use that to get you the best price.
Last edited by AaronIROCZ; Jun 12, 2008 at 10:41 PM. Reason: Automerged Doublepost
Member
Joined: May 2008
Posts: 113
Likes: 0
From: Tulsa, OK
Car: 84 Camaro Sports Coupe
Engine: Carb'd 5.7L 350 W/ Funct. SS Hood
Transmission: 700R4
Axle/Gears: Stock for now
Re: Parting out 91 Camaro rs convertible
I am looking forward to buying a complete gfx kit. front bumper rockers quarters, everything what kinda of deal would you make on the whole kit. i dont need the header panel with the lights
Member
Joined: May 2008
Posts: 126
Likes: 0
From: Catonsville,MD
Car: 1992 Camaro RS t-top
Engine: 305 Jasper
Transmission: 700R4
Re: Parting out 91 Camaro rs convertible
I am looking for a working stock AM/FM/ cassette player. Do you have one? Please advise with price shipped to zip 21228.
Member
iTrader: (3)
Joined: Oct 2002
Posts: 133
Likes: 1
From: Minnesota
Car: 88IROC Vert
Engine: ZZ383
Transmission: 700R4
Re: Parting out 91 Camaro rs convertible
I am looking for the black plastic caps just behind the edge of the doors where the seat belt comes out of. If yours are in excellant shape, please let me know how much you would like. Thanks
Senior Member
iTrader: (2)
Joined: Feb 2008
Posts: 432
Likes: 0
From: Wonder Lake
Car: 1987 chevy camaro iroc-z28 305 h.o.
Engine: 305 high output
Transmission: 700r4
Re: Parting out 91 Camaro rs convertible
i need the tail lights on the photobucket, let me kno, p m me please, thanks
Junior Member
Joined: Aug 2006
Posts: 81
Likes: 1
From: Hyde Park, MA
Car: 72 Malibu, 89 RS & 04 Z71 extended
Engine: (2)350's & 327
Transmission: auto/T5
Axle/Gears: 4:11, 2:73 & 3:73
Re: Parting out 91 Camaro rs convertible
do you have the 3 pieces of the wing/spoiler. If so, how much shipped to 02136
Re: Parting out 91 Camaro rs convertible
If you still have the doors would you be willing to remove the door ground effect on both sides? If so please reply at swg74@***.net.
Senior Member
iTrader: (2)
Joined: Jan 2007
Posts: 733
Likes: 1
From: jackson new jersey
Car: 1991 camaro vert
Engine: ls1 soon
Transmission: t56 soon
Axle/Gears: moser 12bolt 4.10 soon!
Re: Parting out 91 Camaro rs convertible
i need the passenger side spolier and the center spoiler if u still have them i will take 3 piece set and i could also use the trunk lid if u still have them mabey we can work out a price for all please call me at 540 869 2512 asap
Senior Member
Joined: Apr 2003
Posts: 500
Likes: 0
From: Christchurch, New Zealand
Car: 1989 Trans Am
Engine: 1989 305 TPI
Transmission: 700-R4
Axle/Gears: 2.77 10 bolt
Re: Parting out 91 Camaro rs convertible
Senior Member
iTrader: (6)
Joined: May 2005
Posts: 751
Likes: 0
From: Beech Bluff,TN
Car: 1991 Trans Am Convertible
Engine: 305 TPI
Transmission: T5
Axle/Gears: 3:08
Re: Parting out 91 Camaro rs convertible





