1980-1989 IROC STEERING WHEELS WANTED
1980-1989 IROC STEERING WHEELS WANTED
I recently sold a restored steering wheel to a forum member and he did a review on the wheel. Since then, several other member have inquired about the same kind of leather wrapped wheels. Consequently, I am in need of serveral used wheels in any condition. (Well almost any condition). The plastic shroud on the back must not be broken. The condition of the leather is NOT important since it will be replaced.If you have any for sale, I am willing to purhase for $60 including shipping to Michigan. My e-mail is:
ChuckPelton@comcast.net
Thanks,
Chuck
ChuckPelton@comcast.net
Thanks,
Chuck
Joined: Oct 2008
Posts: 27
Likes: 0
From: Indiana
Car: 66 Chevy II SS/89 iroc
Engine: 355/305
Transmission: 350 Turbo/T5
Axle/Gears: 3.08 posi
Re: 1980-1989 IROC STEERING WHEELS WANTED
Chuck, I've got one out of my 89, can send you a pic if needed.
Re: 1980-1989 IROC STEERING WHEELS WANTED
Please do. My direct e-mail is: ChuckPelton@comcast.net
----------
Thanks for the reply. The wheels that I need have the three spokes that are almost 2" wide. It also has the round horn cap.
Chuck
Last edited by Chuck Pelton; Dec 18, 2008 at 04:59 PM. Reason: Automerged Doublepost
Re: 1980-1989 IROC STEERING WHEELS WANTED
That sounds like the ones that I need. Would like to confirm with a picture.
ChuckPelton@comcast.net
Thanks
ChuckPelton@comcast.net
Thanks
Trending Topics
Junior Member
Joined: Jan 2004
Posts: 75
Likes: 0
From: chicagoland
Car: 73LT,81Z,85Z
Engine: 350 350 350
Transmission: 700r4 700r4 700r4
Re: 1980-1989 IROC STEERING WHEELS WANTED
i got a couple and a second gen ta wheel sell for good money on ebay if intrested pm me
Member
iTrader: (62)
Joined: Jun 2005
Posts: 219
Likes: 2
From: milwaukee
Car: 87gta 88gta 88marovert
Re: 1980-1989 IROC STEERING WHEELS WANTED
I found one of the camaro wheels I might of used the other don’t remember. Hear are the trans am gta wheels you student have any problems selling restored ones. make me an offer on them?
Re: 1980-1989 IROC STEERING WHEELS WANTED
Thanks for the pictures and thanks to all the others that responded. I can only use the Camaro wheel at this time. I am not sure what the demand might be for the T/A wheels. Perhaps other forum members can voice their opinion on the demand for the T/A wheels. How would you like payment?
Chuck
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: 1980-1989 IROC STEERING WHEELS WANTED
Just an FYI: The IROC wheel is 85-89.
JamesC
JamesC
Re: 1980-1989 IROC STEERING WHEELS WANTED
Dave,
Sent Paypal today. Please make sure that the plastic piece on the back is protected really good and ship the wheel upside down.
Thanks,
Chuck
Sent Paypal today. Please make sure that the plastic piece on the back is protected really good and ship the wheel upside down.
Thanks,
Chuck
Senior Member
iTrader: (4)
Joined: Jan 2008
Posts: 545
Likes: 0
From: Rustfree Gilbert Arizona
Car: 1989 IROC
Engine: 305TPI
Transmission: 700R4
Axle/Gears: 2:73 posi
Re: 1980-1989 IROC STEERING WHEELS WANTED
I sent mine out already (Thanks again Chuck)
Anyone doing this should not forget to leave good feedback
Anyone doing this should not forget to leave good feedback
Re: 1980-1989 IROC STEERING WHEELS WANTED
Wheel arrived today. Received as described and packaged very good. Thanks again.
Chuck
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: 1980-1989 IROC STEERING WHEELS WANTED
Are you still looking for camaro 3 spoke steering wheels?
Re: 1980-1989 IROC STEERING WHEELS WANTED
Thanks for the inquiry. For a short time I can offer Camaro forum members a very attractive wholesale price on the restoration of their steering wheel. Kindly send me a note to my e-mail and I will respond.
ChuckPelton@comcast.net
ChuckPelton@comcast.net
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Senior Member
iTrader: (2)
Joined: Feb 2008
Posts: 432
Likes: 0
From: Wonder Lake
Car: 1987 chevy camaro iroc-z28 305 h.o.
Engine: 305 high output
Transmission: 700r4
Re: 1980-1989 IROC STEERING WHEELS WANTED
hey, i got one, maybee two, that style, good leather, but twisted at the top, but if you are interested, it/they are yours. it is the style like pictured above, plus i have a sport coupe wheel if ur interestd, its the one with the square center, also i have a mint sterring wheel center for the iroc one
wish i read this earlier, i just busted one up
wish i read this earlier, i just busted one up
Joined: Mar 2002
Posts: 854
Likes: 10
From: Rincon, Ga.
Car: 91 Camaro RS
Engine: 305 TPI conversion.
Transmission: T56
Axle/Gears: 3.73 posi 4th gen rear
Re: 1980-1989 IROC STEERING WHEELS WANTED
i wanted to post up and say that i installed my steering wheel i purchased from chuck. the wheel looks and feels great. i am very satisfied with the craftsmanship.
Member
iTrader: (8)
Joined: Dec 2001
Posts: 370
Likes: 0
From: Simi Valley, CA USA
Car: 87' Pont GTA
Engine: 5.7L
Transmission: 700R4
Re: 1980-1989 IROC STEERING WHEELS WANTED
Dear Chuck,
If you need more I have probably 20 to 30 of them that need recovered. Let me know if you are interested and I will make you a bulk deal on all of them. If you have any questions or other needs we can be reached at (805) 522-2539.
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
If you need more I have probably 20 to 30 of them that need recovered. Let me know if you are interested and I will make you a bulk deal on all of them. If you have any questions or other needs we can be reached at (805) 522-2539.
Thank you,
Thomas R. ***
(805) 522-2539
www.houseofcamaro.com
Thread
Thread Starter
Forum
Replies
Last Post











