parts for sale or trade
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
parts for sale or trade
mostly thirdgen, some newer parts
all exterior parts are from a thirdgen camaro
85-90 iroc style
all parts listed are from a 87 iroc or similar year
harwood 4 inch cowl hood, pin on type, no damage, primered gray
$200 SOLD
harwood 3 inch cowl hood bolt on style, painted red, off my car will include brand new hood shocks for fiberglass hoods
$325 SOLD
will accept a stock iroc/91-92 z hood in exchange for 50 bucks off the price of either hood. If it has louvers or whatever we can discuss
iroc style front nose cone $75 can add crash bar and headlight buckets for extra
87 iroc rear hatch $100
7730 speed density ecm for 305 tpi and 5speed $75
85-90 valance with no blemishes painted bright red $100
side rocker ground effects no damage at all $50 each
autometer 5 inch tach with external shift light and memory backup$75
rear quarter extension pieces 2 sets $25 each panel
door extensions 2 sets $25 each panel
rear bumper cover bright red in color no damage $75
87-90 3 piece rear spoiler with brake lights i have 2 $75 each
have two camaro lettered foglight grills one is primered and would need to be painted and sanded, but could look decent, the other is black and has a gouge in it but could also be sanded/painted. $25 each PRIMED ONE SOLD
black armrests $30/pr
t5 shifter plate, lettering is there but faded, and id replace the boot $ 30
thirdgen t5 clutch pedals, good shape $50
set of grid tail lights $50
87 hatch motors, one guaranteed works, other was pulled out of a car with no power $50 for the one that works, $20 for the other
t-top center bar with no rust. will need new seals installed as i destroyed them removing it. $75
set of glass ttops from an 87 $75 SOLD
t5/t56 torque arm bracket for use with automatic torque arm (swap part)
$40
automatic torque arm $25
t5 torque arm $50
i have way more odds and ends but i need to be cleared of some stuff so if you dont see it listed, feel free to pm me, if i dont have it, i can probably get it. most big parts would need to be picked up in indianapolis indiana area smaller parts you can pm for a shipping quote which shipping is paid by buyer. all parts prices are OBO.
also looking for 85-92 iroc hood or z hood with provision for blisters or louvers, 91-92 aero front chin spoiler, 4th gen seats as parts for barter
thanks
all exterior parts are from a thirdgen camaro
85-90 iroc style
all parts listed are from a 87 iroc or similar year
harwood 4 inch cowl hood, pin on type, no damage, primered gray
$200 SOLD
harwood 3 inch cowl hood bolt on style, painted red, off my car will include brand new hood shocks for fiberglass hoods
$325 SOLD
will accept a stock iroc/91-92 z hood in exchange for 50 bucks off the price of either hood. If it has louvers or whatever we can discuss
iroc style front nose cone $75 can add crash bar and headlight buckets for extra
87 iroc rear hatch $100
7730 speed density ecm for 305 tpi and 5speed $75
85-90 valance with no blemishes painted bright red $100
side rocker ground effects no damage at all $50 each
autometer 5 inch tach with external shift light and memory backup$75
rear quarter extension pieces 2 sets $25 each panel
door extensions 2 sets $25 each panel
rear bumper cover bright red in color no damage $75
87-90 3 piece rear spoiler with brake lights i have 2 $75 each
have two camaro lettered foglight grills one is primered and would need to be painted and sanded, but could look decent, the other is black and has a gouge in it but could also be sanded/painted. $25 each PRIMED ONE SOLD
black armrests $30/pr
t5 shifter plate, lettering is there but faded, and id replace the boot $ 30
thirdgen t5 clutch pedals, good shape $50
set of grid tail lights $50
87 hatch motors, one guaranteed works, other was pulled out of a car with no power $50 for the one that works, $20 for the other
t-top center bar with no rust. will need new seals installed as i destroyed them removing it. $75
set of glass ttops from an 87 $75 SOLD
t5/t56 torque arm bracket for use with automatic torque arm (swap part)
$40
automatic torque arm $25
t5 torque arm $50
i have way more odds and ends but i need to be cleared of some stuff so if you dont see it listed, feel free to pm me, if i dont have it, i can probably get it. most big parts would need to be picked up in indianapolis indiana area smaller parts you can pm for a shipping quote which shipping is paid by buyer. all parts prices are OBO.
also looking for 85-92 iroc hood or z hood with provision for blisters or louvers, 91-92 aero front chin spoiler, 4th gen seats as parts for barter
thanks
Last edited by ls1>*; Feb 24, 2009 at 10:53 PM.
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: parts for sale or trade
I can get a hood missing the louvers or include louvers, South Bend IN. And 4th gen seats. LMK but I dont need any parts.
Thx
Ray
Thx
Ray
Senior Member
iTrader: (2)
Joined: Dec 2008
Posts: 990
Likes: 1
From: Peoria, IL
Car: 1988 Camaro Sport Coupe
Engine: 5.0 305 Carb'd
Transmission: 700R4
Axle/Gears: 3.23
Re: parts for sale or trade
hey id like the foglight grille, you have pictures? pm me
very interested.
very interested.
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Supreme Member
iTrader: (1)
Joined: Sep 2008
Posts: 1,347
Likes: 2
From: Western WA
Car: 85 Camaro
Engine: No
Transmission: No
Axle/Gears: No
Re: parts for sale or trade
How much for the 4" cowl hood + shipping to 98339?
I have a stock '85 z28 hood, but with some rust on the underside, at the very front along the edge...
Interested?
I have a stock '85 z28 hood, but with some rust on the underside, at the very front along the edge...
Interested?
Last edited by gregsz-28; Feb 15, 2009 at 02:33 PM.
Trending Topics
Supreme Member
iTrader: (124)
Joined: Apr 2006
Posts: 1,534
Likes: 1
From: South Bend Indiana iphone CALL OR TXT 574-607-2389
Car: 2003 GMC 2500HD Sierra Pickup
Engine: 6.0 Vortech
Transmission: 4x4
Re: parts for sale or trade
mostly thirdgen, some newer parts
all exterior parts are from a thirdgen camaro
85-90 iroc style
all parts listed are from a 87 iroc or similar year
harwood 4 inch cowl hood, pin on type, no damage, primered gray
$200
harwood 3 inch cowl hood bolt on style, painted red, off my car will include brand new hood shocks for fiberglass hoods
$325
will accept a stock iroc/91-92 z hood in exchange for 50 bucks off the price of either hood. If it has louvers or whatever we can discuss
two iroc style front nose cones $75 each
87 iroc rear hatch $100
7730 speed density ecm for 305 tpi and 5speed $75
85-90 valance with no blemishes painted bright red $100
side rocker ground effects no damage at all $50 each
autometer 5 inch tach with external shift light and memory backup$75
rear quarter extension pieces 2 sets $25 each panel
door extensions 2 sets $25 each panel
rear bumper cover bright red in color no damage $75
87-90 3 piece rear spoiler with brake lights i have 2 $75 each
have two camaro lettered foglight grills one is primered and would need to be painted and sanded, but could look decent, the other is black and has a gouge in it but could also be sanded/painted. $25 each
black armrests $30/pr
t5 shifter plate, lettering is there but faded, and id replace the boot $ 30
thirdgen t5 clutch pedals, good shape $50
set of grid tail lights $50
87 hatch motors, one guaranteed works, other was pulled out of a car with no power $50 for the one that works, $20 for the other
i will have some misc black plastic interior panels so pm if you are looking for something
t-top center bar with no rust. will need new seals installed as i destroyed them removing it. $75
set of glass ttops from an 87 $75
t5/t56 torque arm bracket for use with automatic torque arm (swap part)
$40
automatic torque arm $25
t5 torque arm $50
i have way more odds and ends but i need to be cleared of some stuff so if you dont see it listed, feel free to pm me, if i dont have it, i can probably get it. most big parts would need to be picked up in indianapolis indiana area smaller parts you can pm for a shipping quote which shipping is paid by buyer. all parts prices are OBO.
also looking for 85-92 iroc hood or z hood with provision for blisters or louvers, 91-92 aero front chin spoiler, 4th gen seats as parts for barter
thanks
all exterior parts are from a thirdgen camaro
85-90 iroc style
all parts listed are from a 87 iroc or similar year
harwood 4 inch cowl hood, pin on type, no damage, primered gray
$200
harwood 3 inch cowl hood bolt on style, painted red, off my car will include brand new hood shocks for fiberglass hoods
$325
will accept a stock iroc/91-92 z hood in exchange for 50 bucks off the price of either hood. If it has louvers or whatever we can discuss
two iroc style front nose cones $75 each
87 iroc rear hatch $100
7730 speed density ecm for 305 tpi and 5speed $75
85-90 valance with no blemishes painted bright red $100
side rocker ground effects no damage at all $50 each
autometer 5 inch tach with external shift light and memory backup$75
rear quarter extension pieces 2 sets $25 each panel
door extensions 2 sets $25 each panel
rear bumper cover bright red in color no damage $75
87-90 3 piece rear spoiler with brake lights i have 2 $75 each
have two camaro lettered foglight grills one is primered and would need to be painted and sanded, but could look decent, the other is black and has a gouge in it but could also be sanded/painted. $25 each
black armrests $30/pr
t5 shifter plate, lettering is there but faded, and id replace the boot $ 30
thirdgen t5 clutch pedals, good shape $50
set of grid tail lights $50
87 hatch motors, one guaranteed works, other was pulled out of a car with no power $50 for the one that works, $20 for the other
i will have some misc black plastic interior panels so pm if you are looking for something
t-top center bar with no rust. will need new seals installed as i destroyed them removing it. $75
set of glass ttops from an 87 $75
t5/t56 torque arm bracket for use with automatic torque arm (swap part)
$40
automatic torque arm $25
t5 torque arm $50
i have way more odds and ends but i need to be cleared of some stuff so if you dont see it listed, feel free to pm me, if i dont have it, i can probably get it. most big parts would need to be picked up in indianapolis indiana area smaller parts you can pm for a shipping quote which shipping is paid by buyer. all parts prices are OBO.
also looking for 85-92 iroc hood or z hood with provision for blisters or louvers, 91-92 aero front chin spoiler, 4th gen seats as parts for barter
thanks
I saw a decent hood in a yard the other day, missing the louvers. I forget the year and color but its local. I found the louvers and bought them, they were in the car.
LMK if interested, I hav a few cracked 91 -92 chins available as well.
Thx
Ray
Member
Joined: Apr 2008
Posts: 208
Likes: 0
From: kansas
Car: 82' z28/03' eddie bauer explorer
Engine: 355-395hp/4.6v8
Transmission: Built 700R4/5speed auto 4x4
Axle/Gears: 3.42LSD/3.73
Re: parts for sale or trade
how good of shape are the tail lights in and how much would it be to ship them to 66713?, thanks
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parts for sale or trade
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Junior Member
Joined: Dec 2007
Posts: 29
Likes: 0
From: Indianapolis
Car: 2005 Chevy Colorado/ 1985 Z28
Engine: fast burn zz4
Transmission: th350
Axle/Gears: 10 bolt (has to go) 3:23 gears
Re: parts for sale or trade
interested in the 3" cowl if you still have it, i have a fiberglass hood with provisions for louvers.... let me know if your other hood deal fell through
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Member
iTrader: (3)
Joined: Dec 2008
Posts: 418
Likes: 0
From: Culpeper, Va
Car: 1989 5.7 IROC Dark Red/Blk 92Z28
Engine: 5.7
Transmission: 700R
Re: parts for sale or trade
Hi, Do you have the steering wheel. Looking for an original for my IROC. Also in need of some visors (black or grey) and maybe a decent set of foglights. THANKS! RC
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parts for sale or trade
i do not have an original wheel, i installed a lumina z34 wheel in mine. visors i only have one set of and they gotta stay with the car as do the foglights. I might have another set of fogs ona parts car, i can check. pm me if you wish
randy
Member
iTrader: (3)
Joined: Dec 2008
Posts: 418
Likes: 0
From: Culpeper, Va
Car: 1989 5.7 IROC Dark Red/Blk 92Z28
Engine: 5.7
Transmission: 700R
Re: parts for sale or trade
Wow, that would be wonderful. My email is rchapa1992 at yahoo if you need to email me for the info. THANKS!
Junior Member
iTrader: (1)
Joined: Jul 2007
Posts: 69
Likes: 0
From: Florida
Car: '87 Iroc camaro
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27
Re: parts for sale or trade
Do you still have the t top center bar? If you do I want it as long as there is absolutely no rust AT ALL! Thanks
Thread
Thread Starter
Forum
Replies
Last Post




