Guys I am parting out my engine. Need the money for expenses


Used Holley stealthram intake - 225.00 SOLD
w/ 24 lbs Accel injectors - 300.00 SOLD
set of 30 lbs Accel injectors - 150.00 SOLD

AFR 190cc (2.02in - 1.60ex) heads SBC part number: (190SHST)- 950.00
AFR email:
You have our old 190cc SBC casting which was discontinued around 04. What the markings mean:

190 is the intake runner volume
S is small combustion chamber
H is heat riser (emissions)
ST is straight plug

Used SLP SBC/TPI headers -300.00 SOLD
w/ y-pipe - 400.00 SOLD

Used SBC 350 shortblock (w/ forged interenals) 2000miles on block - 500.00 (w/ starter add 65.00).

MSD igntion system TPI (coil, distributor, 6AL box,w/ harness) - 250.00


MAF sensor - 185.00 (w/ custom intake 230.00)

New Starter 65.00


Stock location K&N AIR FILTERS (2) - 65.00


Stock TPI intake system - 220.00 ( includes runners, plenum, base manifold, fuel rail w/ adjustable fuel pressure reg.) add 55.00 for throttle body with airfoil.


Venom control box module. - 195.00

Used cat 3 inch in and out with AIR hook up ( in decent shape) - 35.00

 

Wow 35 views and no replies.. please pm me with any questions or interests

 

interested in the stealthram..... what does it include exactly??? any pics available???

 

Thanks for the reply it includes: the plenum, intake manifold, fuelrail. injectors are extra. I have a set of 24lbs and 30lbs injectors

75.00 for 24lbs
150.00 for 30 lbs (hardly been used)

I can throw in the stock throttle body for 50.00 if you need that too.

Tell me what you need and we can work something out.

 

Check your pms.

 

Well i am all set on injectors so i would need the intake and plenum with attaching hardware, the fuel rails, and the lines to attach the fuel rails to the body fuel lines..... and just to be sure this is for NON vortec heads right??? also is this for centerbolt valve cover style heads or perimeter??? Will most likely buy it from you just waiting for the response.

Thanks
Bill

 

do u still have the stealth ram? thanks

 

Thanks Bill for the response to answer your questions:

Yes its comes with all the hardware to mount it to the engine and yes its for non vortec heads with perimeter bolts. Im sure it will fill the centerbolt heads as well because i had the stock tpi intake mounted on theses heads before i swaped it for the stealthram and the old heads were center bolt.

thanks

 

PM sent

 

PM sent.

 

Don't forget my pictures. I PM'ed my enail address.
thanks, Fred (acr)

 

Guys I posted a few pics of what im selling I do have more pics just pm me with your email address.


thanks

 

consider the stealth ram sold.... just let me know where to send the money.... and will it come with the fuel lines to attach from the fuel rails to the hard lines on the body???

Thanks
Bill

 

PM sent on short block

 

stealth ram available?

send pics to orion650@hotmail.com if so

 

Venom, I have cash and a short attention span. Please respond to the latest PM. I really want to see the pip0e that goes from the drivers side header to the Y pipe.

 

Venom, please either post here or email me a pic of the complete Y pipe. dlpjr1@verizon.net

If it is includes the portion that attaches to the drivers side header consider the headers and Y pipe sold.

 

874ME It took me a couple of day's to get my pictures, plus he may be gone for a long Memorial Day weekend.
Please remember our service men & women who died so that we may have the Freedoms we sometimes take for granted.

 

did the stealthram sell ? if not let me know, ill get you the money asap !


thanks
kris

 

ive been waiting to pay him for the stealth ram from Tuesday... he still hasnt gotten back to me

 

I have been waiting patiently also. Would like to hear from Venom soon, I was set to install a brand new set of edelbrock headers and Y pipe on my wifes car a week ago and have been holding off. The parts are sitting on the bench, and I have a possible buyer for the EB set up waiting in the wings.

 

I'll agree, especially since he was initally concerned about the lack of replies to his post. I hope nothings happened & he's OK. Does anybody here know him or have a phone number?

 

Sorry guys for the delay had a family emergency and the long memerial day weekend slowed the shipping process. Thanks for your patience. I will answer all questions and get the pics out to people who need them.

 

Yes 874me the y-pipe includes the driver side portion too that goes under the oil pan. they both come together just as they enter the cat. I will have a pic for you tonight, thanks for the patience.

I knew thirdgen guys were the best car enthusiasts.

 

stealthram - SOLD ( silentbobz28)

24lbs injectors - SOLD ( irocz30589)

slp headers - interested party (87z4me)

Still have plenty left to sell, tell your friends.

 

****in ay so much for first come first served i guess.......

 

what size primary are those slp's?

 

Venom, I got your pics, consider the headers sold. Please check your email for details.

 

could you send some more pics of the shortblock and heads to barbienles@msn.com. thanks , and what would it be to have this combo shipped to Ettrick Wi 54627. thanks Les

 

how old are the heads? have a part number on for them? whats the cc's...any port work done to them?

 

I bought them a few years back but I had the rebuilt 1 1/2 ago and only had about 2000 miles on them, no porting done to them other then what AFR does to them. 65 cc combustion chambers. duel valve springs.

 

Added new items to the list in blue font.

 

Venom, do you have the shipping costs? I would like to get the stuff on the road as soon as possible.

 

Bump for good seller.

 

Appreciate the input Bob.

 

PM sent

 

send me pictures of MAF, Stealthram, MSD, headers w/y-pipe, and the venom module. my e-mail is petko0@yahoo.com

 

Venom, check PayPal, headers, Y pipe and accessories sold.

 

do you still have those 30 lb injectors

 

Yes the 30lbs injectors are still available.

 

I'll buy those from you do you think they would be suitable for a tpi 350 with about .450 lift

 

they might be over kill, just have to tune it right

 

I am interested in your AFRs. A part number would help so that I can look them up.

Basic questions are

- do they support centerbolt heads
- are they straight or angle plug
- are they 180s? 190s?
- do they have EGR ports (emissions are mandatory here)
- any known problems, cracks, dings, etc?

thx

 

Just got an Email back from AFR:

You have our old 190cc SBC casting which was discontinued around 04. What the markings mean:

190 is the intake runner volume
S is small combustion chamber
H is heat riser (emissions)
ST is straight plug

No problems with the heads. Valve train has about 2000 miles on it since it has been rebuilt.

 

Just recieved the headers and miscl parts from Venom, as advertised. I am satisfied with the sales experience.

 

Still plenty of stuff to sell any questions please dont hesitate to pm me..

 

To the Top.

 

Thank you Jason the injectors have arrived here in Sweden now, nice doin business with you.

 

Thankyou for your purchase.

Im updating the list still some big items to sell, thanks

 

Do you still have the heads?