I知 parting out 5 cars 1 85 iroc 305tpi auto 1 87 iroc 305tpi auto 1 85 z28 305 4bbl auto 87 formula 305 4bbl auto and a 89 camaro rs 2.8 auto let me know what your looking for and I値l get back to you ASAP.

 

Black sills, kicks, ttop roof plastic and hatch cover. Shipped to 49548

I also like the back seats (black n grey) you have and if you are willing to split up the set would like a price.

 

$80 bucks shipped for the Black sills, kick panels and hatch cover Shipped to 49548
not sure what roof trim your talking about?

 

I'm looking for a XH or WS code steering box. Send me a price. I live in Milwaukee and can pick up.

 

I知 not sure what痴 a XH or WS code steering box?

 

Any of the cars have red interior? I Also need the good window felts and good window sweeps.

 

There is a stamp on the front of the box, fairly large showing 'XH', 'WS' or a different code.

 

No none of these have red interiors but I have some misalliance red interior parts laying around what did you need? The exterior window sweeps?

 

I値l check it out tomorrow. I do have some quick ratio boxes out of the iroc and the formula will have one also it was a ws6 car.

 

In that case I am in need of the outer window sweeps and a good set of window felts...

 

Thanks. How much? Are you still working out of Bruce? I work down the street and could stop by after 3:30.

 

Yes I still have the shop on Bruce I知 only there in the mornings and weekends. $60 bucks I have one out already.

 

How about Saturday. What's a good time?

 

Before 12 on Saturday I知 not working the next couple of days so I can meet you there tomorrow around 4 pm.

 

Sounds good. I'll see you tomorrow.

 

Yes? No? Price?

 

I'm looking for the following parts
82-92 Stock Spindles with no damage.
82-92 Lower Control Arms with out heavy rust or no rust
82-92 Stock springs,
I need one set of front springs with one set of RPO codes they can either be
(BZY) P# 14029399
or
(BZX) P# 14029398

I need one set of rear springs with one set of RPO codes they can either be

(NNB) P# 10018092
or
(NNM) P# 10018092

drivers side rear black 1/4 peace with rear locking compartment,

do any of the cars you talked about above have 9-bolts?

 

Need spindles as well, how many sets do you have? LMK..thanks!

Ed

 

I have the drivers side rear interior panel with the storage compartment in a couple of styles. With or without carpet? With or without hole for rollup cover? With or without rear shoulder belts? I have spindles and some front control arms in good condition. I need to get 60.00 for the spindles + shipping and I would need to get at list 60.00 for the arms + shipping. I will have to check the springs and see if any of them still have the tags on them what years and models are they used on?

 

I need a drivers side lower plastic door sill plate in black. Need it to be pristine,no cracks or damage. Got one?

 

i need the piece that connects the torque arm to the trans. shipped to 72712

 

How much for the gas tank out of the 305 4bbl?? I live in minnesota so I could meet somewhere. I can come pick uop but I would preffer to meet.

 

No luck the only one I have left that isn稚 cracked has some bad rub marks from a sagging door.

 

I will take a look tomorrow and see what I have and there condition.

 

I have one off of a 700R4 20 bucks shipped

 

20 bucks picked up

 

mint grey t-tops sunvisors, have any?

 

1. Cigarette lighter. Correct model for an '87 Camaro.
2. Closure spring for the console mounted ash tray.
3. Rear license plate light lenses. Mine are crazed and cracked.
4. A real center console lid, not an overlay, that's not blown out from the frame or split/cracked etc.
5. Metal TPI distributor cover (got a plastic one that looks like sh*t).

 

I have
1. Cigarette lighter. Correct model for an '87 Camaro. It’s not mint but it works 5.00
2. Closure spring for the console mounted ash tray. Free if you buy something.
3. Rear license plate light lenses. Mine are crazed and cracked. Grid or rs taillights 15.00 bucks.
4. A real center console lid, not an overlay, that's not blown out from the frame or split. I have a couple of nice ones 30 bucks.

 

I will take a look.

 

Hey Dave

I'll take:

1. Cigarette lighter. Correct model for an '87 Camaro. It’s not mint but it works 5.00
2. Closure spring for the console mounted ash tray. Free if you but something.
4. A real center console lid, not an overlay, that's not blown out from the frame or split. I have a couple of nice ones 30 bucks.

Do you want to wait till you get the total for shipping everything with the sub-frame section? I'll just PayPal you the extra $$$. Did you get it cut out today?

 

I need an HVAC case for my 88 trans am. Must be in good shape, and come from an AC car. Shipping to 38313
thanks

 

under the hood hvac box?

 

behind the dash, goes all the way from one side to the other, has all the little vent doors and leavers and actuators and stuff on it

 

I can pull it all out of a 87 firebird I知 parting out. We would have to agree on some kind of price first that痴 a lot of work getting that all out.

 

I'm looking for a posi. How much shipped to 06751?

 

looking for a posi too shipped to 60466.

 

is the 305 tpi with the 700r4? is it a complete engine with all sensors and computer? if so how much you lookin to get?

 

Do you have a 3 spoke steering wheel and horn button out of any of the z28's or irocs? Thanks much.

 

still waiting on vss we discussed via PMs

 

Sorry have not hade time to pull it. We had some bad weather and my basement flooded.

 

No prob. just didnt hear back from any pms.

 

Hey Dave do you have a Posi?

 

i need a gas tank for my irocz. any of these fit? also need shifter cable. also need a rad overflow tank all to 17315

 

Im looking for a 10 bolt 28 spline series 3 carrier posi any chance you may have one and how much to ship to 57104

 

i need a complete rear end. i have a 86 with a 350tpi from another iroc and the rear end needs to be changed so e-mail me at petko0@yahoo.com

 

outside door handles and the parts from the outside handle to the latch

 

I have them and the rods. How about 30 shipped?

 

Do you have any exhaust Y-pipes? Techinally I need a LG4/LU5/L03 Y-pipe but wouldn't mind upgrading to L69/TPI manifolds and Y-pipe if available.

 

Still waiting on that VSS