Wiring harness needed
Thread Starter
Joined: Oct 2007
Posts: 1,375
Likes: 6
From: Wyoming
Car: 1995 Formula
Engine: LT1 350
Transmission: Built 4L60e
Axle/Gears: 10 bolt, Eaton posi, 3.73's
Wiring harness needed
I would like an 86-88 V6, TBI or TPI harness for as cheap as you can rid yourself of it.
The more intact the harness the better, pretty much, but what I really need are the C100 (big bulkhead near the booster), C207 (clear connector near the ECM) and C221 (small gray connector near the C207) with about 12" of wiring from each. The condition of the rest of the harness is really of no consequence, but the longer it is the easier it will be for me.
Thanks.
The more intact the harness the better, pretty much, but what I really need are the C100 (big bulkhead near the booster), C207 (clear connector near the ECM) and C221 (small gray connector near the C207) with about 12" of wiring from each. The condition of the rest of the harness is really of no consequence, but the longer it is the easier it will be for me.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post