I've decided I've had this combo long enough and its time to go extreme. Looking to sell.

383 Shortblock. Block is an 89 block one piece. 2 bolt main. Has about 25-30K miles on it. (Runs awesome) Eagle cast crank, Eagle Forged H beams. (I beams had trouble so they upgraded me for free) and Hyper SpeedPro pistons. Deck was line honed. ARP main studs. block was deck. Entire rotating assembly was internally balanced. Only problem was when they were building the engine. there was small crack in the lifter valley. It was drilled and pinned. . No Issues. Oil pressure is 25-30 HOT with it 80+ outside and being at a 600 idle. Doesnt burn an ounce of oil. Comes with Miloden Oil Pan. Engine was professional built by Victory Racing in Cleveland Ohio. $650.00 This is a great price! Pending sale.

LPE 219 cam. 219/219 560/560 112 LSA $125 shipped. Pending Sale

Comp Cams Pro Magnum 1.6 Rockers. Must be used with plates Much Better then the Crane Golds. Fits under stock valve centerbolt covers. $160.00 Shipped. Peding Sale

Ac Delete Pulley. $35.00 Shipped.

Used autozone gold Alternator. Works perfect. $40.00 Shipped

Email me Mkos1980@aol.com and we'll talk.

 

pm sent

 

pm sent

 

Pic of engine. Its still all together. I take very good care of my stuff. It can all be seperated in 2-3 days.

Headers pics for someone who PM'ed me.

 

What are you looking to get for the Mini-Ram?

 

Miniram and fuel line kit comes with a full set of ARP fasteners as well, new Felpro Gaskets and the Accel -AN to standard f body fuel line fittings. $750.00 $500 less then new.

 

How much for the headers and y-pipe?

 

375+ shipping. Its nice set. I didnt use any cheapo muffler clamps. All I used was bandclamps so all the pipes come apart nice and are not crimped. The Y pipe does with SLP's cat adapter and a full set of Stage 8 locking header bolts.

 

why are you parting out? How did the miniram run with the smallish cam? Did you still have some good lowend grunt?

 

I sent you a PM. Going to a boosted LSX motor now. Tons of low end. Not as much as with the LTR setup but enough. I found my dyno sheet. 368 RWHP and 381 RWTQ Quickest ET was a 12.3 with a 1.71 60'

 

+ When you have a perfect running car you get bored with it. lol I havent touched it in over a year. Just driving it. I need to work on it again lol.

 

Pic of Throttle body. Its like new. Comes with new GM IAC valve and TPS sensor.

 

Any idea on shipping the headers and y-pipe to 98282?

 

Specs and part number for the heads?

 

Its looking around 50ish. I have to find the smallest box I can to put all this stuff in. I'll get you a better price tonight.

 

http://www.trickflow.com/partdetail....4&autoview=sku

These are the heads except mine are not CNC'ed It was only an option for these when I bought mine and I didnt have the extra cash.

 

matt let me know if you don't sell the headers and y pipe. i installed those 2210 headers and they won't work with the efi setup in my car. no way to run a knock sensor with them. i'm looking for pick up some cheap slp's with the y pipe so i can just be done with the exhaust and back to driving the car.

 

You have to move knock sensor to the driver side with the 2210's
375 and they are yours. I'm sure you can sell the 2210's and break even. I'll even throw in my catco 3in cat if you want.

 

killer deals on well taken care of parts. Can't wait to see the boosted lsx. I have a lsx sitting around Im thinking of selling my boosted 383 and going turbo on the lsx.

You selling the 411 harness? I know a buddy who could use ALL the 411 stuff. we just did a HSR and procharger setup on. looking to swap from maf to new setup now.

 

Thanks Chris, Your right these parts are all in excellant shape. Accually I got an email that I was able to use my harness and ECM so I am keeping that and getting rid of the rest.

 

No problem, figured id ask. would be nice to get all iin one deal. Esp. since I know the cndition of the parts.

You have a game plan on your next build already? Pm me so We dont clutter up your FS post. Id like to hear what ya have goin on.

 

Is there much rust on them?

 

They are 1 3/4 . I do not have the dent where people put it for the steering column. I grinded down my column instead. The spots of rust you see if surface rust on the coating. Comes off with SOS pad. (I tested tonight) The Y pipe is not coated and has the usualy thin layer of surface rust. Again comes off with sos pad. Its all stainless steel.

 

None of the pipes are crimped also. Every piece can come part. I used all band clamps. All the clamps will be included. (4)

 

Pm sent again

 

Headers sold pending payment.

 

Can you give me a shipped price for the pushrods to 87108, Alb., New Mexico?

 

Per my post the $35.00 price was with shipping! Let me know!

 

Willing to ship the "super deal"? If so, how much? I'm interested.

 

No shipping. BTW Nice Car. Looks Identical.

 

Let me know if the headers sale falls through, I am very interested. PM me if you could, for some reason I wasn't being alerted when you reply.

 

Headers are sold.

 

pm sent

 

Pic of Lifters, dogbones and hold down tray sent to whoever was interested.

Should have pics of heads tonight!


I also have a set of Proform Chevrolet chromred valve covers. Centerbolts. Inside has been notched to clear rockers. Also the outside lip was notched a tad to clear superram runners when installed with intake on. Once side though had the chevrolet logo paint flake off. VERY nice covers though. Can provide pics if needed. $35.00 + shipping.

 

Trick Flow Pushrods Sold.

 

Head Pics For Everybody.

 

More

 

PM on heads. Prob. consider em sold. pending shipping quote to me matt.

 

Pulleys Sold

 

I can toss these in for anybody who buys the heads for an extra 25 bucks. $35 + shipping for others. These are not the polished covers. These are the chromed. in excellant shape. One cover has 2 notches I had to add to get them to clear the superram runners when I had that setup. Also clearanced on the inside. 0 leaks. Also one side had the paint flake off. Very nice covers though. They clean up to a mirror finish.

 

ttt

 

Lifters Sold.

 

Heads SOLD!!

 

TTT

 

OBD II Supplies Sold !

 

Do the injectors come with the miniram? If so what size,, thanks Sean

 

Holley TB and Valve Covers Sold.



As for the injectors, the intake has been long gone. I have a set of 8 LS1 injectors 28lbs. 26 I think at TPI pressure. $50.00 shipped.

 

Ok, nevermind,,,, I want to get rid of this Superram and get a miniram. thanks anyway

 

are the rockers 3/8 or 7/16??

 

3/8th

But now I have the engine, rockers and cam pending sale.