[NC] Parts needed to finish my EFI swap.
#1
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Mebane, N.C.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: Daily: Lincoln Town Car.
Engine: 355 SBC in the Fiero
Transmission: 5 speed F23 w/LSD
Parts needed to finish my EFI swap.
Here's the bottom line (if anyone needs more info or has other questions, please ask!)
The guy who is handling my EFI swap told me I had a few wrong parts, and some other stuff I haven't gotten yet - this is going onto a built 355 Gen 1 (currently running a carb).
Stuff I still need:
2 Wideband o2 sensors (I can get them new for about 80 bucks a pop, but if someone has them cheaper, great).
1 regular o2 sensors (again, I know they're fairly cheap new, but if I can help out a fellow member...)
5.7 350 3.9 ohm knock sensor for a 1992 Camaro/Firebird (apparently there are two parts that look identical and people confuse them?)
Likely more stuff to be requested/updated on this thread.
(edited: got some stuff, so removed those.)
The guy who is handling my EFI swap told me I had a few wrong parts, and some other stuff I haven't gotten yet - this is going onto a built 355 Gen 1 (currently running a carb).
Stuff I still need:
2 Wideband o2 sensors (I can get them new for about 80 bucks a pop, but if someone has them cheaper, great).
1 regular o2 sensors (again, I know they're fairly cheap new, but if I can help out a fellow member...)
5.7 350 3.9 ohm knock sensor for a 1992 Camaro/Firebird (apparently there are two parts that look identical and people confuse them?)
Likely more stuff to be requested/updated on this thread.
(edited: got some stuff, so removed those.)
Last edited by Trinten; 03-19-2012 at 09:50 PM. Reason: updated list
#2
Junior Member
iTrader: (2)
Join Date: Jun 2008
Location: Leadwood,MO
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 GMC Jimmy
Engine: 350
Transmission: Nv3500 5 speed
Axle/Gears: Dana 44's f&r, 4.30 gears
Re: Parts needed to finish my EFI swap.
I think I have a 7730 ecm. Dont have a chip for it.
#3
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Mebane, N.C.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: Daily: Lincoln Town Car.
Engine: 355 SBC in the Fiero
Transmission: 5 speed F23 w/LSD
Re: Parts needed to finish my EFI swap.
Hey B3B, cool, how much are you looking to get?
Someone else sent me an email with a link to one on ebay, it seems like a really great price based on what I've seen, it's from a 305, but it's my understanding that is all part of the program in the Memcal EPROM, and would be fixed by my new memcal, correct?
Someone else sent me an email with a link to one on ebay, it seems like a really great price based on what I've seen, it's from a 305, but it's my understanding that is all part of the program in the Memcal EPROM, and would be fixed by my new memcal, correct?
#4
Junior Member
iTrader: (2)
Join Date: Jun 2008
Location: Leadwood,MO
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 GMC Jimmy
Engine: 350
Transmission: Nv3500 5 speed
Axle/Gears: Dana 44's f&r, 4.30 gears
Re: Parts needed to finish my EFI swap.
Make me an offer on it. i have no use for it. Im runnin all OBD2 stuff.
#6
Member
iTrader: (18)
Join Date: Jan 2003
Location: Champlain, NY
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Re: Parts needed to finish my EFI swap.
FYI: forum member utilityguy2 is selling reprogrammed V6 MEMCAL's with 350 AUJP (or 305 AXXF/AXXD bcc) for $89 shipped. I'm not connected to him but am sure I bought one from him via ebay.
They work great...got one with VATS and EGR disabled. Here is a link to his post:
https://www.thirdgen.org/forums/engi...-firebird.html
They work great...got one with VATS and EGR disabled. Here is a link to his post:
https://www.thirdgen.org/forums/engi...-firebird.html
#7
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Mebane, N.C.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Car: Daily: Lincoln Town Car.
Engine: 355 SBC in the Fiero
Transmission: 5 speed F23 w/LSD
Re: Parts needed to finish my EFI swap.
Hey R3500, thank you!
I did find his thread and him and I are PMing back and forth, discussing knock sensor capability of the unit he sells. I appreciate the tip!
I did find his thread and him and I are PMing back and forth, discussing knock sensor capability of the unit he sells. I appreciate the tip!
Thread
Thread Starter
Forum
Replies
Last Post