parting a 1991 Z28 hardtop
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
parting a 1991 Z28 hardtop
I am parting a 91 z28 (car in sig). Has black interior. Good parts include switches, panels, 5spd shifter plate, etc. let me know what you need and I will get pics of it for you. I may post certain high interest items on their own.
hatch motor SOLD
drivers seatbelt SOLD
rear seat belts SOLD
privacy shade SOLD
headliner SOLD
5spd shifter plate SOLD
fuse panel cover SOLD
drivers side rear time below the speaker SOLD
drivers side rear seat belt cover for the shoulder SOLD
hatch motor SOLD
drivers seatbelt SOLD
rear seat belts SOLD
privacy shade SOLD
headliner SOLD
5spd shifter plate SOLD
fuse panel cover SOLD
drivers side rear time below the speaker SOLD
drivers side rear seat belt cover for the shoulder SOLD
Last edited by BOTTLEDZ28; Apr 28, 2013 at 01:00 PM.
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
HVAC panels. I have 3 of them. One works as it was the one in my car. other two were bought at a local swap meet to have as spares. Asking $45 shipped for all 3.


Last edited by BOTTLEDZ28; Apr 28, 2013 at 01:00 PM.
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
yes, the silver car in my sig is being parted due to too much rot on the shell. It needs floors and some serious patch work on the firewall, and all four wheel wells. Its not worth my time and effort to fix it.
Member
iTrader: (1)
Joined: Sep 2012
Posts: 164
Likes: 0
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: parting a 1991 Z28 hardtop
well that sorry to hear...im interested in the shifter console and would you happen to have a full 6 speed swap??
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
Yes I do have a complete 6 Spd swap. Trans is from a 97 TA that I bought in 2001 with 40k miles on it. I might have put 10k more miles on it since then. Shifts perfect. Comes with Spec stage 3 clutch, flywheel, slave cylinder( new from GM in 01), t5 pedals, Spohn T56 crossmember with loop, and any other small items needed to complete the swap. It will be posted up here tomorrow with pics. I'm looking to get $2700 for everything.
Trending Topics
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
The drivers seat has the typical wear spot on it. they are black. you still interested? if so i will get pics. Shipping wont be cheap.
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Member
iTrader: (4)
Joined: Apr 2004
Posts: 318
Likes: 0
From: New Orleans
Car: CAMARO
Engine: 383 LT1
Transmission: T 56
Axle/Gears: 3.73
Re: parting a 1991 Z28 hardtop
Yes. The wiper motor switch is under the dash. The wiper lever on the column has a wire that runs down the column to the wiper switch. How much would you want for the wiper lever and switch?
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
That part is a MAJOR PITA to get out of the column. Im not screwing around and busting my ***** for a couple dollars. My column has all the airbag crap in it that I would need to remove and I need a puller just to get the steering wheel hub off. Sorry .
Junior Member
Joined: Jan 2013
Posts: 67
Likes: 0
From: Atco , new jersey
Car: 1988 base
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 2.73
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
I still have parts for sale of the car guys. door panels, seats, dash parts, switches, panels, etc
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Member
iTrader: (1)
Joined: Feb 2005
Posts: 424
Likes: 0
From: Columbus, OH, USA
Car: '91 Z28, '13 Civic EX-L
Engine: 355 LT1, 1.8 I4
Transmission: T56, 5spd auto
Axle/Gears: 10 bolt 3.42(as long as no breaky)
Re: parting a 1991 Z28 hardtop
how about the top half of the center console with cargo lid?
If it has power windows then just the cargo lid.
Thanks
If it has power windows then just the cargo lid.
Thanks
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
The top portion of the center console is still available. It does not come with the 5 pd shifter plate and it has cutouts for power windows and the hatch switch. The lid is slightly broke I think. I will get you a pics later today.
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: parting a 1991 Z28 hardtop
I'll get them off and take a couple pics of them and get back to you on shipping. if you can give me a business address to ship to then it will be cheaper.
Thread
Thread Starter
Forum
Replies
Last Post
CarGuyDennis
Organized Drag Racing and Autocross
137
Dec 6, 2016 11:02 PM
sailtexas186548
Exterior Parts for Sale
14
Feb 29, 2016 08:40 AM







