[PA] As-New: Wheel Bearings, Wilwood Brake Proportioning Valve, Crane HEI Coil In Cap Conv
Thread Starter
Member
iTrader: (3)
Joined: Jul 2005
Posts: 137
Likes: 0
From: Pittsburgh, PA
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
As-New: Wheel Bearings, Wilwood Brake Proportioning Valve, Crane HEI Coil In Cap Conv
All parts are as new, never installed. Prices include all shipping/paypal fees/etc. Shipping outside the continental US will be extra.
Crane Cams HEI Coil In Cap Conversion; $30 shipped
This is used to covert from an in-cap coil to a high performance external coil. Details on the kit can be found here:
http://www.summitracing.com/parts/cr...0590/overview/
Federal Mogul (National) Front Wheel Bearings and seals; $40 shipped SOLD to Zed/28
These were the bearings I bought for my '84, but they should fit just about any year third gen (as well as a ton of other vehicles). As you can see in the picture, they are still in the factory wrappers.
Includes all 4 bearings and both seals needed for the left and right front hubs (two A-34 bearings, two A-6 bearings, two 8871 seals). See specs here:
http://www.summitracing.com/parts/ntl-a34/overview/
http://www.summitracing.com/parts/ntl-a6/overview/
http://www.summitracing.com/parts/tmk-8871/overview/
Wilwood 260-8419 Brake Proportioning Valve; $30 shipped SOLD
Again, brand new, never installed. Great upgrade if you converted to rear disks, or like to autocross and want to adjust brake bias. See specs here:
http://www.summitracing.com/parts/wi...8419/overview/
I also have a T-Top bag for sale (see other post). I sold my Camaro a few years ago and would like all this stuff gone. Make me an offer on the whole lot.
Crane Cams HEI Coil In Cap Conversion; $30 shipped
This is used to covert from an in-cap coil to a high performance external coil. Details on the kit can be found here:
http://www.summitracing.com/parts/cr...0590/overview/
Federal Mogul (National) Front Wheel Bearings and seals; $40 shipped SOLD to Zed/28
These were the bearings I bought for my '84, but they should fit just about any year third gen (as well as a ton of other vehicles). As you can see in the picture, they are still in the factory wrappers.
Includes all 4 bearings and both seals needed for the left and right front hubs (two A-34 bearings, two A-6 bearings, two 8871 seals). See specs here:
http://www.summitracing.com/parts/ntl-a34/overview/
http://www.summitracing.com/parts/ntl-a6/overview/
http://www.summitracing.com/parts/tmk-8871/overview/
Wilwood 260-8419 Brake Proportioning Valve; $30 shipped SOLD
Again, brand new, never installed. Great upgrade if you converted to rear disks, or like to autocross and want to adjust brake bias. See specs here:
http://www.summitracing.com/parts/wi...8419/overview/
I also have a T-Top bag for sale (see other post). I sold my Camaro a few years ago and would like all this stuff gone. Make me an offer on the whole lot.
Last edited by sjc115; Oct 21, 2013 at 03:18 PM.
Thread Starter
Member
iTrader: (3)
Joined: Jul 2005
Posts: 137
Likes: 0
From: Pittsburgh, PA
Car: 1984 Camaro
Engine: 350, 4bbl
Transmission: 700R4
Axle/Gears: GM, 3.23 posi
Re: As-New: Wheel Bearings, Wilwood Brake Proportioning Valve, Crane HEI Coil In Cap
Bearings and Prop Valve are sold. I still have the HEI Coil In Cap Conversion if anyone is interested.
Thread
Thread Starter
Forum
Replies
Last Post
red90IROCls1
Transmissions and Drivetrain
10
Aug 25, 2015 06:56 AM




