looking for a set of factory 10bolt pbr brake mounting plates.. nothing else just the plates for left and right

 

There's a couple of pair on ebay.

 

I've got a set of 95 LT1 PBR Backing plates. I Blasted and prep'd the plates and all hardware for my own use - then didn't use them.


Other members here have installed these on ThirdGen rear ends by using spacers. I'm not sure of the details but the thread must be active in the BRAKES secion.


Send a PM if your interested.

 

thanks, I had looked there but i really do not like ebay and they were a little more than I'm willing to spend

 

These aren't the easiest things to find, so you may have to cough it up.
Just a note about ebay:
If you are looking for classic car parts and you say you won't use ebay, then you really are missing a huge chunk of the available parts.
I buy and sell all kinds of stuff on eBay, nothing to be afraid of if you follow a few rules.
Look at the seller feedback! Don't buy from problem people.
If they don't have complete pictures, ask for more and don't buy until you get them.
Don't go outside the system with sellers, you lose all the buyer protection.
Make sure you look at shipping cost and what service they are using. Don't expect it to be there next day if you used economy shipping.
If you have questions, ask before you buy and don't buy from people that don't respond.
If you floow these guidelines, eBay falls pretty heavy on the side of the buyer these days so if you have a problem you can usually get your money back if you file within the allotted time. Don't let the seller string you along! It's not a problem to file a claim and rescind it if the seller responds properly.
Not trying to push eBay, just want people to recognize that if you are going to need parts for 30 year old cars, you really need to look on eBay.

 

I have a brand new pair. $50
PM for details