need help i cant identify this holley carb
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
need help i cant identify this holley carb
on the carb it says 83310-1 2125 right under that one side says R81 other says P80. On the base of the carb there are these numbers 12R-4770B. its a 4 barrel. if anyone know what carb this is please let me know. thanks
#2
Junior Member
Join Date: Feb 2009
Location: Copperas Cove, TX
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 5.7
Transmission: 5 Speed Man.
Axle/Gears: Spohn 3.73 with Strange Axels
Re: need help i cant identify this holley carb
From what I can find out on the web...it's either a 750 or 780. I am not sure if it's set up as a double pump or dual feed. If it has the jet/fuel plate on the back side it would be a double pump, if not then dual feed.
Either one is a great carb. I used to have a 780 dual feed on my small block 350 that flowed 810 CFM, with only some minor mods.
Look up just the 83310-1 number, and you should be able to find out more info.
Good luck.
Either one is a great carb. I used to have a 780 dual feed on my small block 350 that flowed 810 CFM, with only some minor mods.
Look up just the 83310-1 number, and you should be able to find out more info.
Good luck.
#3
Senior Member
Join Date: Sep 2004
Location: N. Ky
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 T/A - 70 Z28/RS
Engine: Broke - 350
Transmission: 700R4 - M22
Axle/Gears: G80, 2.73 - ZQ9 G80 4.10
Re: need help i cant identify this holley carb
#4
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Holley's website has a better reference: http://www.holley.com/data/TechServi...%20Listing.pdf
Looks like a 4160 model vacuum secondary 750.
By the way, mrjhett, "dual feed" and "double pumper" are unrelated aspects of Holley carbs. It's either "dual or single feed", and either "double pumper or vacuum secondary".
#5
Junior Member
Join Date: Feb 2009
Location: Copperas Cove, TX
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 5.7
Transmission: 5 Speed Man.
Axle/Gears: Spohn 3.73 with Strange Axels
Re: need help i cant identify this holley carb
My bad.... I guess I didn't say what I meant.... Thanks for clarifing.... I know the diff between those...jus didn't say it right lol Let me try now:
The 780 (Vacuum secondary , without the jet plate...jus the float bowl on the backside) was the carb I had...
BTW Thanks for the links, I'm going to save them...even though I'm not currently using carbration anymore....
The 780 (Vacuum secondary , without the jet plate...jus the float bowl on the backside) was the carb I had...
BTW Thanks for the links, I'm going to save them...even though I'm not currently using carbration anymore....
Thread
Thread Starter
Forum
Replies
Last Post