LedZep

iTrader: (22)

http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback


Pulled Parts Ready to Sell:

Complete A/C Evap Housing: $40 + SH
A/C Evaporator: $40 + SH
Complete Steering Column: $110 + 1/2 of SH
Wiper Motor: SOLD
700R4 Complete Shifting Mechanism: SOLD
E-Brake Lever: $25 Shipped
Shifter Plate: $40 + SH
Window Switches (x2): SOLD
Shifter Boot: $15 Shipped
Complete Plastic Dash Shell: $70 + 1/2 SH
Air Box/Vents (Parts Behind Dash Shell): $60 + SH
Door Sill Panels w/ Minor Damage on 1 of the 2 (PM for pics): SOLD
Almost All Interior Plastic Trim Pieces (Charcoal Gray) Available: PM me

(prices are open to some negotiation)

Pictures: https://www.thirdgen.org/forums/inte...ing-wheel.html


Various Plastic Trim is Available (PM for Details)




(prices are open to some negotiation)

Pictures: https://www.thirdgen.org/forums/inte...ing-wheel.html


Various Plastic Trim is Available (PM for Details)




Sold Parts:

Radio Pod
Steering Box
Cat Converter
Sill Panels
Steering Column and Steering Wheel
Interior Shifting Mechanism
Speaker Covers
Complete Headliner
Heater Core + Interior Heater Core Cover
Headlight Module
Dome Light Housing
T-Top Center Bar
Complete Seat Belt Setup
Seat Guide Black Trim Covers (x4)
Windshield Wiper Motor
Complete Tail Light Assembly w/ Center Trim
Passenger Side Performance Suspension Trim Panel
Both Headlight Motors
Brake Pedal/Pedal Arm (rest of assembly still available)
All Side Moldings
Hatch Motor
Power Mirrors w/ Switch and Harness
Third Brake Light
Torque Converter Cover
Shift ****
Both Door Panels (bare)
Gauge Cluster
Dash Pad
Hatch Struts
Gauge Cluster Trim
Both Sun Visors
Rear View Mirror
Lower Front Interior HVAC Piece
HVAC Interior Control Panel Hoses
Complete Serpentine Assembly (except A/C Compressor)
Headliner
Radio Harness


Hello Third Gen gurus, my name is Keith and I have been apart of these forums for a long time and you guys have really helped me out of jams while restoring my 1990 Formula 305 after this wreck in 2002. Since then I have done small swapping like fuel tanks and some interior. Now I am going to part out the car piece by piece. I am a member of GMMOC and have purchased very cool parts off here, like the air induction box and lid for the power bulge hood.

Here is the 1989 Formula, the black paint on it was brand new when I purchased it and was done by a local talented painter.



I smacked a pine tree going about 30MPH due to ice and that is what was done after removing everything. Anything except the block + internal components and transmission is for sale.


The car has been kept under tarps and always in this dog house covering 90% of the car from the elements, especially rain.




You can see some of the very nice parts at the rear of the car

Thanks for looking and you can contact me at krhallman@gmail.com


Remember, everything except the block + internal engine parts and transmission is for sale, although I have a spare 700R4/305 TBI for sale



Current State of Interior :



See anything you need?

palric

iTrader: (1)

hello

do you have the door mounted cupholders? if so I would like to buy both sides.

thx

rs1990

Hello,

Do you have a working retractable shade cover? How much including shipping to zip 33175?

thx

LedZep

iTrader: (22)

I have both the door cup holders and the working retractable shade. I just need sometime to get prices put on everything requested so far.

Also I wanted to mention this is obviously a WS6 car and the suspension and associated materials only have ~92k miles on them. The quality of parts here is very high and is pretty much a complete 90 Formula minus what I'm keeping.

andrew-wagers

how much you want for the wing and firebird tag between the tail lights

92firebird 305

How much for rims if there size16 and how much for front sway bar and rear sway bar and ac heat control panel

LedZep

iTrader: (22)

Rims are size 16 and the rest of the parts should be for sale too after checking out their condition. Give me time to start an inventory of parts that have been asked about and their prices. Or if someone wants to try and speed up the process PM me a offer and the part/parts.

LedZep

iTrader: (22)

remove post

LedZep

iTrader: (22)

Pictures!





































See all here

http://ws6zep89.picturepush.com/albu...-Part-Out.html

LedZep

iTrader: (22)

Also wanted to mention I have some various parts for sale off the 90 Formula including axles, drive shaft, at least 1 catalytic converter, various straps and mounts for suspension and rear end. I will also have a spare rear end (open 2.73) for sale once I complete the engine swap. I also have a spare, spare tire



You can see some of spare tire here:

dannyvera778

iTrader: (5)

hey how much for the door tops that run along the door panels...i believe there the same for camaros right?

LedZep

iTrader: (22)

I'm trying to sell both doors complete and I have an interested buyer right now. I will let you know if that changes.



I just took some shots of loose parts that could easily be pulled out and shown:





Obviously I have the rest of the parts that match these, like the other 3 springs.


Here is another shot of the door, showing it is still straight and undamaged, the other door is the same. The side view mirrors have been taken off and put inside to protect them.

gt4373

Have Any Heater Parts?

LedZep

iTrader: (22)

I have all heater parts, but what is damaged is unknown until I start tearing into it. What specific heater parts?

LedZep

iTrader: (22)

I also wanted to mention that I have an active ebay account with a long history.

http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback

and remember guys, anything on this car is available except the main part of the motor (meaning non essentials motor bay parts are still for sale) and the transmission. Everything from the drive shaft back is for sale and everything inside.

Thanks for your interest.

LedZep

iTrader: (22)

I've been in rough shape physically from my pain so all inquiries will have to hold for a bit.

LedZep

iTrader: (22)

_____________________________

Bump/Update

_____________________________

Hey guys, I haven't really gone into it, but I thought I would talk about it. I am a chronic severe neck pain patient who is trying to get money together to pay medical bills; this is because my condition is still a mystery outside of the structural problem:








You can see how this happened in a quick video, I am 54 in the right bottom corner of your screen and I'll be going for the tail back, it plays again in slow mo:


I had two shoulder surgeries for football so I didn't have good shoulders, instead I hit people with my head up and my face mask to any side of their helmet. I probably did this a few hundred times and then you get where I am now.

Right now I am refusing to be on disability because of my conservative views, even though I am unable to hold down a job due to 24/7 pain and had to leave Electrical Engineering my Jr year at a top 20 Engineer School in the US (NCSU) + an IT Job for the Dept Waste Management.

Anyway I really need to sell these parts and I appreciate any interest in them. I took some new pictures after wiping stuff off with some Windex:










see it all here: http://picturepush.com/+WOUN


Obviously the parts are not perfectly clean as I just gave it a quick wipe down. I am showing these parts because I have had interest in them in terms of PM.

However please PM me about any part you would find on an 89 Formula 305 TBI and most likely I have it for sale.


Thanks for your time and sorry if I rambled haha,
Keith

nothingbutagthn

iTrader: (2)

did you ever sell the wing if not how much shipped to 37352

LedZep

iTrader: (22)

The Spoiler remains!

No one wants to pay shipping, but you are only 5-8 hours away and I could meet you at some point, although I can't drive far due to my chronic pain.

email me: krhallman@gmail.com

R3500

iTrader: (18)

PM sent..I need a very complete shifter for a 700R4 streetrod project.

LedZep

iTrader: (22)

bump

RaceFace

iTrader: (3)

How much for door upper plastic panel, passenger side (those, with inner felt window seal)?

ram88ws6

how much for door pannels and pics please, thanks Ram

LedZep

iTrader: (22)

PM sent

RaceFace, I am trying to sell the door panels as a whole; however if I do end up parting them out I will put you first on the list for that.

LedZep

iTrader: (22)

bump, everything is still for sale, nothing has been purchased yet.

Tuned Performance

iTrader: (92)

Good luck with the part sales, I feel your pain Just had a herniated disc replaced first part of the year because some a hole was txting and rear ended me on a freeway off ramp for 55mph.

LedZep

iTrader: (22)

Thanks man and I'm sorry to hear about your neck problem. Mine is mainly muscular/tendon with some movement at C2 pushed back into the spinal cord slightly and angled off alignment. I have been getting help and have been off pain meds for about 4 months now after about 5 years of being on them daily. Be very careful with the pain meds, they can be a bigger problem than the injury.

Tuned Performance

iTrader: (92)

cymbalta 60mg helps some and I take vicodin when we have much barometric changes. Would wish these issues on anyone. Your car was beautiful sorry about the accident.

LedZep

iTrader: (22)

So far only thing taken is the Catalytic Converter in the Engine/Exhaust related materials

LedZep

iTrader: (22)

Pulled some parts today, for tonight here is a spare Throttle Body:






More tomorrow

LedZep

iTrader: (22)

remember guys, any parts you want me to go after, just name it. The only thing I can remove is the motor and transmission. Any accessory part to the motor that wasn't damaged can go (water pump, AC, etc).

LedZep

iTrader: (22)

I am going to be pulling the torque converter cover off today for a buyer, so if anyone has any request related to the drivetrain please let me know.

LedZep

iTrader: (22)

Yesterday while I was pulling off the torque converter cover for a buyer I took off the Y-Pipe. This thing is still in perfect condition. Anyone interested in this or anything else PM me.

LedZep

iTrader: (22)

Items Gone or On The Way Out:

Radio Pod
Cat Converter
Headlight Motor
Hatch Motor
Power Mirrors and Switch
Rear Tailight Assembly + Center (possibly still up for grabs)
Third Brake Light
Dome Light Housing
Converter Cover
Door Panels Upper Trim

anything else is still up for grabs.

jhmltn85

steering column w/ intermediate shaft, keys, bolts, etc.......long story...... is it still available, condition, and price?

LedZep

iTrader: (22)

all still available, PM me but give me a few days to pull parts because I have multiple orders backing up.

LedZep

iTrader: (22)

Here is a list of sold parts:

Radio Pod
Cat Converter
Headlight Motors
Hatch Motor
Power Mirrors and Switch
Third Brake Light
Torque Converter Cover
Shift ****
Both Door Panels
Gauge Cluster
Both Sun Visors

convert46

is the wing original or replacement? how much to 49323

LedZep

iTrader: (22)

original with damage on the edges.






The rest is fine:

LedZep

iTrader: (22)

Will be pulling lots of parts tomorrow for requests sent over the Holidays so if anyone has anything they are interested in seeing/buying post here or PM me with details.

LedZep

iTrader: (22)

Updated List of Sold Parts

Radio Pod
Cat Converter
Both Headlight Motors
All Side Moldings
Hatch Motor
Power Mirrors w/ Switch and Harness
Third Brake Light
Torque Converter Cover
Shift ****
Both Door Panels (bare)
Gauge Cluster
Gauge Cluster Trim
Both Sun Visors
Rear View Mirror
Both Sill Trim Panels
Lower Front Interior HVAC Piece

onthedownlow

iTrader: (4)

Does this car have the dual electric fan setup? Or is it the single? If it is a dual, please post some pics and let me know how much you're asking.

LedZep

iTrader: (22)

It is the single, but due to the crash it was damaged anyway. Sorry about that.

LedZep

iTrader: (22)

Guys I just wanted to make it clear, anything that you can unbolt from the motor is for sale and so is the drive shaft and rear end and any parts associated with them.

When I say I am keeping the motor/tranny, I mean simply the block/internal components and transmission. Anything else is for sale, for example: Water Pump, AC, Exhaust Manifolds, Intake Manifold, Throttle Body, Distributor, Computer, Wiring Harness (partial or complete), etc.

Thanks for looking.

LedZep

iTrader: (22)

bttt

KennyC

How much for the doors and are they power or manual windows and locks? thanks.

LedZep

iTrader: (22)

Sorry for the late reply, but the doors are power windows and locks. However you can imagine that is a very expensive shipping cost, where are you located? PM me.

------------------------------


Over the next 3 days I will have extra help with the car and I have a decent list of parts to pull, so anyone who wants to inquire about anything, now is a good time to PM me.




BTW, the door sills weren't sold because I found damage on them right before shipping and sent the buyer back a full refund. If anyone is interested in looking at them PM me, I can fix the small crack or you can do it yourself.

FireTurdWS626

do you have the retractable shade for hatch area? if so whats the charge? shipped to 91755

LedZep

iTrader: (22)

yea I have it, PM me

LedZep

iTrader: (22)

I haven't sold a single item off this motor/driveline except the torque converter cover, lol. I know this is a 305 TBI, but I am willing to sell anything except for internal engine components/block. Meaning if it unbolts from the motor, I am willing to sell it. The only thing that was really damaged in the wreck was the radiator/fan, even the pulley system is still intact. I would even sell the heads and intake off the motor if someone needed a replacement for their 305, just nothing that can't be unbolted (cam/crank/etc). So come on, lets hear some inquiries!

I have medical bills piling up and I need to get parts sold..