350 w/ t5 clutch and flywheel?
10-07-2014, 10:34 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
350 w/ t5 clutch and flywheel?
Hi guys I have been on this site for a while just reading now I need some actual help I have a 85 z28 that I swapped a lo5 350 into that cam with a th350 and it's giving me issues I would rather have a manual transmission anyway so I have located a t5 I grabbed a clutch pedal assembly from a 4th gen along with the master cylinder I just dont know what size clutch and flywheel to get and will I need a different starter thanks for any help btw my engine is stock with a edlebrock 600carb and performer rpm intake
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM
monte87cortez
Transmissions and Drivetrain
2
09-26-2015 08:10 PM