Can S/R Torquers produce same power as AFR190's?
11-26-2002, 10:10 PM
#1
Member
Thread Starter
Join Date: Mar 2000
Location: Marion, IA USA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro Z28
Engine: LS1
Transmission: TKO 600
Axle/Gears: 10 bolt 3.23
Can S/R Torquers produce same power as AFR190's?
With the following setup using desktop dyno, i'm coming within a few horsepower of the AFR190's with the S/R Torquers. My question is, is this possible? I'm telling my friend that it's not possible. He says it is. We're talking about untouched heads. Here's the setup:
355, Tunnel Ram, 10:1, 1000cfm, small tube headers with mufflers, dual purpose street cam, roller, 235/243 0.548/0.556 114 lobe sep. All specs at 0.050. Timing is at 0. Here are the flow numbers that i have for the two different heads.
S/R's
Intake Exhaust
0.100 68 55
0.200 128 100
0.300 179 133
0.400 205 156
0.500 221 166
0.600 225 169
AFR190's
Intake Exhuast
0.100 71 65
0.200 144 115
0.300 208 146
0.400 244 176
0.500 262 190
0.600 261 197
what do you all think?
355, Tunnel Ram, 10:1, 1000cfm, small tube headers with mufflers, dual purpose street cam, roller, 235/243 0.548/0.556 114 lobe sep. All specs at 0.050. Timing is at 0. Here are the flow numbers that i have for the two different heads.
S/R's
Intake Exhaust
0.100 68 55
0.200 128 100
0.300 179 133
0.400 205 156
0.500 221 166
0.600 225 169
AFR190's
Intake Exhuast
0.100 71 65
0.200 144 115
0.300 208 146
0.400 244 176
0.500 262 190
0.600 261 197
what do you all think?
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Problems / Help / Suggestions / Comments
2
08-24-2015 10:11 PM
