Look what santa dropped off.
#1
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Elizabeth, Colorado
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Car: '94 Corvette
Engine: LT1
Transmission: 4L60E
Look what santa dropped off.
Well, I kind of bought it for myself (I really needed though). It makes it so much easier to buy things durning Christmas, cause I'm not the only one that pegs out the old credit card and the deals ----- man-o-man the deals -----
I still need to get an intermediate chest, and guess what! My birthday is in a week...I'll just have to find another card to use.
Come on post your Christmas stuff people, thats why I made the thread...and let us know if you like them? to keep on topic...
btw: I love the ball bearnings. I compared the fictions & these - I was sold. I also bought a 240 something piece tool set, for a nice foundation to build apon. I'll have to make a mobile set for trips or whatever out of my old tools.
-=Merry Christmas Everyone=-
...and no, I haven't been drinking!!! That's for Christmas day
Ron
I still need to get an intermediate chest, and guess what! My birthday is in a week...I'll just have to find another card to use.
Come on post your Christmas stuff people, thats why I made the thread...and let us know if you like them? to keep on topic...
btw: I love the ball bearnings. I compared the fictions & these - I was sold. I also bought a 240 something piece tool set, for a nice foundation to build apon. I'll have to make a mobile set for trips or whatever out of my old tools.
-=Merry Christmas Everyone=-
...and no, I haven't been drinking!!! That's for Christmas day
Ron
#2
Supreme Member
iTrader: (5)
Join Date: May 2001
Location: Naples, FL
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Firebird
Engine: 383 stroker
Transmission: T-56
Good score dude. Looks really sweet. That 240 piece set will come in handy for sure. Are you planning on leaving it there in the house and building engines there in the comfort of central A/C or something? lol. I wish that I could sometimes. It gets pretty hot here in SW Florida.
Tom
Tom
#3
TGO Supporter
Join Date: Oct 2003
Location: ready room
Posts: 2,069
Likes: 0
Received 0 Likes
on
0 Posts
Car: NCC-1701-D (docked in AZ)
Engine: impulse drive
Transmission: fusion reactors
Axle/Gears: Rescued from the Borg by my crew
Got enough cash this Christmas to buy Holley Stealth Ram with Holley TB! YAHOO!!!!!!!!
#4
Supreme Member
Join Date: Dec 2001
Location: boonton, NJ
Posts: 1,854
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro Z28
Engine: 434sbc
Transmission: powerglide
Axle/Gears: moser 9" with 411 posi
i got a victor JR intake manifold, cam degreeing kit, and head bolts. i also got myself a set of AFR heads. i bought myself them because they are so expensive. bad thing is that they wont be here until late febuary
#5
Member
Join Date: Mar 2001
Location: JACKSON -MS-USA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Guys santa has been great to me ! I got a new 3 pc craftsman tool box , a 245 pc craftsman kit a low profile aluminum racing jack and im fixin to bust off my fresh mini rammed afr 383
#6
TGO Supporter
#7
Senior Member
Join Date: Sep 2001
Location: Montreal\Quebec|Canada
Posts: 968
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro Z281991 Engine: 5.7L/350 TPI Transmission: TH700R4 ··································· Car: Acura CL 1998
Engine: 3.0L/183
Transmission: 4 spd auto/OD
looks great, congrats !
Trending Topics
#8
TGO Supporter
Join Date: Sep 2003
Location: conway, s.c.
Posts: 6,127
Likes: 0
Received 8 Likes
on
8 Posts
Car: 1989 Iroc-Z
Engine: 5.7L TPI
Transmission: 700R4
I found a auto x-ray ez-scan 6000 diagnostic scanner and a set of ratcheting gear wrenchs in my stocking by the fireplace.
The Trickster!!!!!!!!!!!!
The Trickster!!!!!!!!!!!!
#9
Member
Join Date: Aug 2003
Location: Madison, WI
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 6.2
Transmission: 700r4
Axle/Gears: 10 Bolt 4.10
I got a set of 7/16" roller rockers, 7/16" studs, and 7/16" stud girdles for christmas! No more valvtrain problems!
#11
Junior Member
Join Date: Sep 2003
Location: Laguna Hills
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
i work at sears, and the batch of ball bearing tool chests (model number: 59615) we got werent very well built. At my work, laguna hills, our whole batch of them, the top drawer isnt aligned correctly so it does not open easily. we had to stop selling them today. so im glad yours works great, but if you live in south orange county, open it and check b4 yu put it in your car.
#12
Supreme Member
Join Date: Nov 2000
Location: Newark, DE
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28
Engine: 355
Transmission: T-56
i got a my craftsman heavy duty top box to match my chest box (non bearing, but owell), along with brake line wrenches, feeler guages, a 39pc metric tap kit, a 39pc stand. tap set, a 14.4 volt drill, a variable speed dremel with remote attachments, a REALLY nice torque wrench, some clothes, and a 4 day trip to Stowe, Vermont for the best skiing of my life
Yeah, i'm a happy camper this year
Yeah, i'm a happy camper this year
#13
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Elizabeth, Colorado
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Car: '94 Corvette
Engine: LT1
Transmission: 4L60E
Interesting info 'thechristopherh' about the 59615...
This is the very unit I have. The only problem I had was with drawer # 3 didn't want to close all the way. I replaced the right slider($10 Sears Parts), and it works great now.
The drawer sliders on the chest don't roll as good as the ones on the rollaway (59614) though.
Any problems with 59603 Intermediate 3 drawers 18" deep?
BTW: You guys got some killer **** !!!!!! , I think if we combine it all we can start a top fuel or Nascar team...
ohh, and yea Tom I'm keeping inside for as long as can I'll have to at least clean my garage up really good...
Ron
This is the very unit I have. The only problem I had was with drawer # 3 didn't want to close all the way. I replaced the right slider($10 Sears Parts), and it works great now.
The drawer sliders on the chest don't roll as good as the ones on the rollaway (59614) though.
Any problems with 59603 Intermediate 3 drawers 18" deep?
BTW: You guys got some killer **** !!!!!! , I think if we combine it all we can start a top fuel or Nascar team...
ohh, and yea Tom I'm keeping inside for as long as can I'll have to at least clean my garage up really good...
Ron
#14
Junior Member
Join Date: Sep 2003
Location: Laguna Hills
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
interestingly enough, the only returns i get are 59615s. but yeah, if anyone wants 10% off sears shizzz and they live in orange county, id be the one to talk to :-).
#15
Member
iTrader: (1)
Join Date: Mar 2003
Location: lowry crossing, texas
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z/28 Camaro
Engine: 350ci
Transmission: T-56
Axle/Gears: 9" 3.73 spool
go santa!
left me rear gas a jusr shocks, rear moog springs, rebuilt carubretor, weeeeeeee, and i got some tools from a good friend, score
i also finished off my stereo system for my x mas present to my self
i also finished off my stereo system for my x mas present to my self
#16
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Elizabeth, Colorado
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Car: '94 Corvette
Engine: LT1
Transmission: 4L60E
Tools are always a good score...
Hey 'thechristopherh', Dang it - I was in Orange County a couple of months ago!!! It was a hotel over by I5 & W Chapman...I was chilling on a hotel bed for about a week, on a real estate job. Well really it was my mom's job, and I was just taging along.
I would of given anybody a million dollars, if you would of told me I would wake up with four hours of sleep by a phone call saying "you want to go to LA for week", and within 3 hours I would find myself driving down 55 in a blue Taurus rental @ night!!! My old lady wasn't happy about me just booking, but man I had to get out - you guys know what I mean.
Imagine what your girl friend or wife would say if you rolled over in bed & said I'm going to LA for a week - see ya I'm leaving in 15 minutes It was funny, however my F'in cell bill wasn't!
sorry I went into story mode....
Ron
Hey 'thechristopherh', Dang it - I was in Orange County a couple of months ago!!! It was a hotel over by I5 & W Chapman...I was chilling on a hotel bed for about a week, on a real estate job. Well really it was my mom's job, and I was just taging along.
I would of given anybody a million dollars, if you would of told me I would wake up with four hours of sleep by a phone call saying "you want to go to LA for week", and within 3 hours I would find myself driving down 55 in a blue Taurus rental @ night!!! My old lady wasn't happy about me just booking, but man I had to get out - you guys know what I mean.
Imagine what your girl friend or wife would say if you rolled over in bed & said I'm going to LA for a week - see ya I'm leaving in 15 minutes It was funny, however my F'in cell bill wasn't!
sorry I went into story mode....
Ron
#17
Supreme Member
Join Date: Jul 1999
Location: Saskatoon, Saskatchewan, Canada
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 406
Transmission: TH350, 4200
Axle/Gears: Moser 9", 3.89
Originally posted by heavy_chevy29
i also got myself a set of AFR heads. i bought myself them because they are so expensive. bad thing is that they wont be here until late febuary
i also got myself a set of AFR heads. i bought myself them because they are so expensive. bad thing is that they wont be here until late febuary
#18
Senior Member
Join Date: Dec 2003
Location: Ontario, Canada
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Trans Am
Engine: 5.0L Fuel Injection
Transmission: Automatic 4speed /w OVerdrive
Here is what I bought myself for Xmas...which is what brought me to this club to begin with
#19
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Elizabeth, Colorado
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Car: '94 Corvette
Engine: LT1
Transmission: 4L60E
Nice score...
BTW: You see above, all the tools we buy? ah ha - you'll need them
Just kidding, the third gen actually a very reliable car. A 2nd ('70-'81) gen on the other hand - well,
------------------
Oh yea fellows, since the boxes I scored more Craftsman tools - and dang it, I wish someone would have told me not to get the socket trays. Now my goal is to fill up every dang hole with a socket - and folks I have 4 drawers with socket trays. Freaking deeps, stds, & metrics.
Thank g0d I didn't get stuck on Snapon, because I don't need a second mortgage. I absolutely suck when it comes to saving money!!!
...and YES 'Tom91Bird' It's still on nice cushy carpet inside my house.
Ron
BTW: You see above, all the tools we buy? ah ha - you'll need them
Just kidding, the third gen actually a very reliable car. A 2nd ('70-'81) gen on the other hand - well,
------------------
Oh yea fellows, since the boxes I scored more Craftsman tools - and dang it, I wish someone would have told me not to get the socket trays. Now my goal is to fill up every dang hole with a socket - and folks I have 4 drawers with socket trays. Freaking deeps, stds, & metrics.
Thank g0d I didn't get stuck on Snapon, because I don't need a second mortgage. I absolutely suck when it comes to saving money!!!
...and YES 'Tom91Bird' It's still on nice cushy carpet inside my house.
Ron
#20
Senior Member
Join Date: Dec 2003
Location: Ontario, Canada
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac Trans Am
Engine: 5.0L Fuel Injection
Transmission: Automatic 4speed /w OVerdrive
thats one sweet tool chest for sure man. guess you need all those tools with 4 cars waiting for upgrades eh?
#23
Senior Member
iTrader: (4)
Join Date: Aug 1999
Location: previously OKINAWA JAPAN,georgia, now new england
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC--1989 T/A
Engine: 5.7 TPI in both
Transmission: W/C T-5 in both
Axle/Gears: B/W 3.27 in both
Don't bother with the sockets!!!!
I too have the same set-up. You will never use a 25/32 sockets or the other half of the crap...
Just take RTV, and fill in the nonsense.
NOW THIS IS DEFINITELY MY HUMBLE OPINION.
Shawn.
Just take RTV, and fill in the nonsense.
NOW THIS IS DEFINITELY MY HUMBLE OPINION.
Shawn.
#24
Supreme Member
Thread Starter
Join Date: Nov 1999
Location: Elizabeth, Colorado
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Car: '94 Corvette
Engine: LT1
Transmission: 4L60E
19/32
21/32
25/32
1 1/2
and Metric 1/2" deep 6 point - no such thing yet from Craftsman.
Them F'in sockets have feeled up (4) 16 1/2 x 26" drawers.
The good thing is a finally got a 3 drawer intermediate. I really needed it!!!
Now I'm off on a Dewalt trip Blame my family for getting me one of those Dewalt Stereo/Chargers for my birthday a couple weeks ago. Currently have my eye on a 14.4V cordless drill
Yea 'formula350sd' about the 2nd gen. Man I'm hoping to get busy on a resoration on my '81 by it's 25th birthday. Right now, an F'in PARKING GARAGE isn't going to cut it! I need a damn shop!!!!!!!!!!! I was thinking about getting one built on my land, but there not to cheep when you start adding all the requirments - like power etc...
Ron
21/32
25/32
1 1/2
and Metric 1/2" deep 6 point - no such thing yet from Craftsman.
Them F'in sockets have feeled up (4) 16 1/2 x 26" drawers.
The good thing is a finally got a 3 drawer intermediate. I really needed it!!!
Now I'm off on a Dewalt trip Blame my family for getting me one of those Dewalt Stereo/Chargers for my birthday a couple weeks ago. Currently have my eye on a 14.4V cordless drill
Yea 'formula350sd' about the 2nd gen. Man I'm hoping to get busy on a resoration on my '81 by it's 25th birthday. Right now, an F'in PARKING GARAGE isn't going to cut it! I need a damn shop!!!!!!!!!!! I was thinking about getting one built on my land, but there not to cheep when you start adding all the requirments - like power etc...
Ron
#25
Supreme Member
Join Date: Oct 2002
Location: Los Angeles, Ca.
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Car: Base Firebird
Engine: TPI 350
Transmission: T56
Axle/Gears: D44
i know its a little late, but i've been away from the boards for a while.....
here's what i got for xmas!
and a pic of them installed!
here's what i got for xmas!
and a pic of them installed!
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
05-28-2019 01:47 PM