Skulte Performance
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: Raleigh, NC
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: Ls1
Transmission: T56
Axle/Gears: 4th gen 3:43
Skulte Performance
Hi All,
Anyone else have trouble with this vendor? I have been trying to contact him for days now about my order and no emails or phone calls from them and I have already paid! I see he is a vendor on this site and would just like to know when my product will ship?!
Anyone else have trouble with this vendor? I have been trying to contact him for days now about my order and no emails or phone calls from them and I have already paid! I see he is a vendor on this site and would just like to know when my product will ship?!
#2
Senior Member
iTrader: (3)
Join Date: Oct 1999
Location: Apple Valley, MN
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Z28 convertible
Engine: Miniram 383
Transmission: T-56
Axle/Gears: 4.10 stk 10 bolt
Re: Skulte Performance
They have always taken care of me! He's a busy guy, Im sure he'll take care of you.
#3
Member
iTrader: (1)
Join Date: Sep 2008
Location: NE & KS
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
Re: Skulte Performance
took me 3 months to get my x-member, and i had to email numerous times. his products are very nice, just the time i had to wait sucked.
#5
Junior Member
Thread Starter
Join Date: May 2009
Location: Raleigh, NC
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: Ls1
Transmission: T56
Axle/Gears: 4th gen 3:43
Re: Skulte Performance
He just emailed me and i trust what everyone says, so hopefully i get it in the next 2 weeks....
#7
Supreme Member
iTrader: (4)
Re: Skulte Performance
I'd have been pretty pissed if it wasn't such a nice looking piece.
He apparently is a busy man, he'll get around to it eventually. He's legit, he just makes you wait. It's up to you how comfortable you are with that. I know I was pretty annoyed. But it's a nice piece....
Trending Topics
#8
Supreme Member
iTrader: (4)
Re: Skulte Performance
Andres is a very stand up guy. If you catch him on the phone, he wont hang up with you until he's sure you have what you need. His products seem to be of good quality. I dealt with him on a few sets of wheel spacers.
Gotta remember...this is still the beginning of the Spring/Summer...prime car building time. So he is probably busiest now.
J.
Gotta remember...this is still the beginning of the Spring/Summer...prime car building time. So he is probably busiest now.
J.
#9
Member
iTrader: (4)
Join Date: Oct 2005
Location: Long Island,NY
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
Re: Skulte Performance
Has anyone heard from this guy? I placed an order July 8th, sent e-mails and no response. A heads up would be nice
#10
Re: Skulte Performance
This is kinda off topic, but can or cannot ? a similar X-member with double humps be made for a 4L60E transmission ?
Anyone know why I dont see someone making one ?
Anyone know why I dont see someone making one ?
#12
Re: Skulte Performance
Two thumbs up for Skulte! Received my x-member yesterday and it looks amazing. Communication was great, he sent me e-mails to keep me updated. Great guy to deal with.
#13
Member
Join Date: Aug 2007
Location: Long Island, NY
Posts: 201
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1992 z28
Engine: LS1
Transmission: T-56
Re: Skulte Performance
This vendor is starting to worry me a bit with my order. I ordered my crossmember over a month ago and have recieved litteraly nothing regarding this. I have emailed him numerous times over the past month and still have not gotten a single response from him. I understand that he makes these custom and that its not the same as ordering from summit but it is bad buisness to not answer emails, especially when he took his phone number off the website. Anyone spoken to him recently?
#15
Member
iTrader: (4)
Join Date: Oct 2005
Location: Long Island,NY
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
Re: Skulte Performance
This vendor is starting to worry me a bit with my order. I ordered my crossmember over a month ago and have recieved litteraly nothing regarding this. I have emailed him numerous times over the past month and still have not gotten a single response from him. I understand that he makes these custom and that its not the same as ordering from summit but it is bad buisness to not answer emails, especially when he took his phone number off the website. Anyone spoken to him recently?
#16
Supreme Member
Join Date: Nov 2006
Location: NY sucks
Posts: 1,724
Likes: 0
Received 1 Like
on
1 Post
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: Skulte Performance
I ordered a X-member about a week or two ago and now i'm kinda irritated at the terrible customer service. I have from now all over the winter to complete the car so i'm not worrying too much.
#17
Supreme Member
iTrader: (4)
Re: Skulte Performance
I ordered from him on July 8th. After a few e-mails I sent him, he finally responded on July 20th telling me that the x-member was about 4 weeks out. I set him an e-mail yesterday asking if I should expect the x-member next week. Haven't received a response yet. Too bad I couldn't get the x-member sooner,had a buddy of mine ready to line up with me in his Mustang at the East Coast F-bodys Nats!
He told me they were 6 weeks or so off... then he was saying it'll be about 4 weeks from the current date... and then two months went by.... then I contacted him again and he said they were gonna be done next week, and I could save some time if I elected not to get it powder coated. I wanted it powder coated. A month later I sent him another email, and he responds back saying "I just got several of these done and yours is next. It'll be in powder coat early next week and should be at your door by the end of next week or the beginning of the week after"
And I got it the next Friday. From what I gather he just waits til he gets enough orders, then makes a whole bunch of em at once. But he kept saying they were backed up with orders, and the xmembesr were about a month off for 3 months, and then he apparently made at least half a dozen in one afternoon. And this was a month after he told me that they were about to start on mine, and if I wanted to skip powdercoating it be at my door in a week.
Like I said, if it wasn't such a nice piece, I'd be livid. But at least he got back to me within a day or two most times. I never had any complaints about customer service from them... but I ordered in early January and didnt get it until May 1st. And all of his estimates about ETA's were WAY off... it was usually twice as long as he told me it would take.
But he always got back in touch with me fairly quicky.
He's no con artist... he's just busy, and he makes you wait. It's up to you about whether or not that's acceptable, but honestly... He's the only place you can go to get a pre-made crossmember like that... He's got a commodity in demand over there. A bunch of guys here have rolled their own though.
Last edited by InfernalVortex; 08-07-2009 at 02:51 AM.
#18
Member
Join Date: Aug 2007
Location: Long Island, NY
Posts: 201
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1992 z28
Engine: LS1
Transmission: T-56
Re: Skulte Performance
Honestly I only have 2 gripes with the way this is turning out.
#1 Not answering multiple emails or having a phone number which someone can contact you at after they have already spent money on your product is unacceptable.
#2 No where on his website does it say anything about them not being in stock or there being an extreme wait time for these pieces. The only reason I know that I am not getting con'd right now is because of this forum.
I ordered the parts for my swap a month ahead of time so I wouldnt have any tie ups when it comes to waiting for parts, but it looks like that wont be the case and the deadline for my project will have to be pushed back just for this...
#1 Not answering multiple emails or having a phone number which someone can contact you at after they have already spent money on your product is unacceptable.
#2 No where on his website does it say anything about them not being in stock or there being an extreme wait time for these pieces. The only reason I know that I am not getting con'd right now is because of this forum.
I ordered the parts for my swap a month ahead of time so I wouldnt have any tie ups when it comes to waiting for parts, but it looks like that wont be the case and the deadline for my project will have to be pushed back just for this...
#19
Member
iTrader: (4)
Join Date: Oct 2005
Location: Long Island,NY
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
Re: Skulte Performance
Sent him another e-mail Yesterday(Friday). Pointed out to him if there's a problem keeping the date, JUST TELL ME!!! Just want the common courtesy of HONESTY!!! I didn't expect to have this custom piece the next day, however I am trusting his word as to an ETA on the x-member. He did offer to "lend" me a non-LT x-member but I opted not to "borrow" it because it wouldn't help the exhaust shop install a system without the proper x-member anyway.
#21
Member
Join Date: Aug 2007
Location: Long Island, NY
Posts: 201
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1992 z28
Engine: LS1
Transmission: T-56
Re: Skulte Performance
I have still not heard one thing from him and I am very annoyed. I placed my order on July 8th. I heard nothing at all on my order so I emailed him on July 27th requesting a status update on my order. After this email I still recieved no email back so I emailed him again on August 3rd trying to get to the bottom of this and I STILL have not recieved one ounce of communication from this guy.
This is starting to get really rediculous.
This is starting to get really rediculous.
#22
Member
iTrader: (4)
Join Date: Oct 2005
Location: Long Island,NY
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
Re: Skulte Performance
Sent him another e-mail Monday. Told him to ship it next week or forget it. A little tired of the lack of communication. If I don't hear from this guy within the next few days, I'm gonna make an x-member. That's what I should've done in the first place,just too lazy to go pick up the steel and fabricate it.
#23
Supporter/Moderator
Re: Skulte Performance
Hi guys,
I apologize, and I really hate making excuses for not keeping you all informed about the status. It's been zero time left over from the day job - I thought I'd be able to keep up, but I haven't. I’ve dropped the ball on my obligation to you all. In any case, this is the last batch xmems I'll be fabricating.
Status update is that I was able to get the material, and cut the pieces for the LT xmems tonight. I plan to drill & slot the pieces tomorrow night. I will keep you guys all in the loop - I've sent a BCC email to you all. I have prototype std (not longtube) xmems that I've offered as loaners until these xmems are fabbed if your cars need to be moved or driven (although loudly w/ open headers!). Just ask, and I'll ship them. I expect to have the xmems fabricated mid next week, and then off to get powdercoated. If you’d like to cancel the order, I understand, and again, just let me know.
For those of you paying via Visa/MC/Discover, your credit card will not be run until the xmems are shipped. Those that paid automatically with paypal, I can refund the payment – let me know if that’s what you prefer.
Powdercoat or no powdercoat – please let me know which you prefer. It’ll save about 1 week. Since this is a small batch just for you all (and not for inventory), I should be able to get custom colors – let me know if you prefer something other than jet semi-gloss black.
If you’re running an alternate shackle style torque arm – let me know, and I’ll toss in some extra box tube and angle iron for the mount, as well as skipping the powdercoat (if you want) so you don’t have to grind it down to weld.
Again, I apologize.
Andris Skulte
I apologize, and I really hate making excuses for not keeping you all informed about the status. It's been zero time left over from the day job - I thought I'd be able to keep up, but I haven't. I’ve dropped the ball on my obligation to you all. In any case, this is the last batch xmems I'll be fabricating.
Status update is that I was able to get the material, and cut the pieces for the LT xmems tonight. I plan to drill & slot the pieces tomorrow night. I will keep you guys all in the loop - I've sent a BCC email to you all. I have prototype std (not longtube) xmems that I've offered as loaners until these xmems are fabbed if your cars need to be moved or driven (although loudly w/ open headers!). Just ask, and I'll ship them. I expect to have the xmems fabricated mid next week, and then off to get powdercoated. If you’d like to cancel the order, I understand, and again, just let me know.
For those of you paying via Visa/MC/Discover, your credit card will not be run until the xmems are shipped. Those that paid automatically with paypal, I can refund the payment – let me know if that’s what you prefer.
Powdercoat or no powdercoat – please let me know which you prefer. It’ll save about 1 week. Since this is a small batch just for you all (and not for inventory), I should be able to get custom colors – let me know if you prefer something other than jet semi-gloss black.
If you’re running an alternate shackle style torque arm – let me know, and I’ll toss in some extra box tube and angle iron for the mount, as well as skipping the powdercoat (if you want) so you don’t have to grind it down to weld.
Again, I apologize.
Andris Skulte
Last edited by askulte; 08-11-2009 at 10:00 PM.
#24
Member
iTrader: (4)
Join Date: Oct 2005
Location: Long Island,NY
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Car: Bone stock 1989 Iroc T-Top,1991 Z28
Engine: 5.7, Carbed 383
Transmission: 700r4, T-56
Re: Skulte Performance
Thanks for the update,sent you an e-mail. In a nutshell, I'll take the extra steel and no powdercoating. (gonna run a UMI adj. TA.)
#25
Supporter/Moderator
Re: Skulte Performance
I won't have internet access for the next few days, but I wanted to give an update now.
Last night I finished slotting the side arms, and milled the angles on all the arms. Next step will be bending the drivers side arm in the 20 ton press, and then milling the center piece, which will get completed Tue Night. Wed night I plan to weld up the xmems, and ship the unpowdercoated on Thur.
Andris
Last night I finished slotting the side arms, and milled the angles on all the arms. Next step will be bending the drivers side arm in the 20 ton press, and then milling the center piece, which will get completed Tue Night. Wed night I plan to weld up the xmems, and ship the unpowdercoated on Thur.
Andris
#26
Senior Member
iTrader: (1)
Join Date: Nov 2002
Location: Kansas City
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am
Engine: L98
Transmission: T56
Re: Skulte Performance
I won't have internet access for the next few days, but I wanted to give an update now.
Last night I finished slotting the side arms, and milled the angles on all the arms. Next step will be bending the drivers side arm in the 20 ton press, and then milling the center piece, which will get completed Tue Night. Wed night I plan to weld up the xmems, and ship the unpowdercoated on Thur.
Andris
Last night I finished slotting the side arms, and milled the angles on all the arms. Next step will be bending the drivers side arm in the 20 ton press, and then milling the center piece, which will get completed Tue Night. Wed night I plan to weld up the xmems, and ship the unpowdercoated on Thur.
Andris
#27
Supporter/Moderator
Re: Skulte Performance
I just wanted to let you guys know that I really appreciated your patience with everything. I just picked up the last batch of xmems from our powdercoating place, so that wraps up all of our outstanding orders. Thanks again.
#28
Supreme Member
Join Date: Nov 2006
Location: NY sucks
Posts: 1,724
Likes: 0
Received 1 Like
on
1 Post
Car: 84' Corvette, 96' Caprice
Engine: LT1, L99
Transmission: T-56, 4L60e
Axle/Gears: 3.07 POSI, 2.93 Open
Re: Skulte Performance
I received my crossmember from him last week unfinished, Bare steel, which i did not asked to be shipped. I merely asked how mush long he was thinking it would take then all the supped got an e-mail stating it was shipped unfinished. So i received it bare steel and had to pay an additional $25 to have it powder coated, on top of the $200 already sent to him that was supposed to pay for the powdercoating as well. The piece is very well built but i do not appreciate the lack of communication and the miscommunication we has when we did talk, plus the fact that i had to have the piece powdercoated as an additional fee on top of what i already paid. Not impressed.....
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
05-17-2020 10:44 AM