vortech305

Im interested in camaro and firebird pics. So if u got any please post it. I know there another place asking for pics but i want to see each and every individual pic u guys got. OF your muscle car, F-body anything. I currently have a 92' camaro and im trying to figure out what color to paint. I have a tan interior and im considering hawaiin orchid purple which were used in 92' camaros and vettes. If any of u's got this color on your car including cast ZR1 vette rims please post the pic. I also have a 1971 plymouth duster, and painted electric blue, with 315 rear tires on back the car looks damn hot. I would post my pics but i dont know how i have a scanner and i downloaded the pics but i cant go through, if u happen to know please list all info in order so i dont screw anything up. thanks

------------------
92' camaro
New 305 block TPI conversion, Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads accel cam,52mm throttle bodie, SLP runners,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods msd 8.5 mm wires hypertech coil and plug, Edelbrock TES headers, free flowing catalytic converter and a 3 ich force II flowmaster exhaust system.
Soon to come!!!
Procharger system 12lbs o boost.
Favorite quote: "where ever u go, there u are"

cvpde37

Link is in the sig. I'm sure you can find some pics in there if you check out the different links.

------------------
1984 Z28 350
Never argue with an idiot, they'll just bring you down to their level and beat you with experience
My Web Page

WS - 666

http://www.ws666.homestead.com

To undergo a major update in the next month sometime.

------------------
...:::WS-666:::...

Yeah--that's right...

Nitro Don

I need some better pics to show the hood.This car changes from grey to violet in the sun.
Nitro Don

------------------
1990 Trans Am WS6
305TPI 700R4

ENGINE:
150hp NOS kit
March underdrive pulleys
Edelbrock headers(JetHot)
Mac off-road pipe
Flowmaster exaust
Jacobs ultra coil
K&N filter
Fulley ported base,
runners,& plenum
Crane AFPR
Hypertech airfoil
Crane 1.6 rockers
210/220 .533/.544 Cam
W/P Torquer heads
Edelbrock TPI Base
Edelbrock TI Runners
Edelbrock 52mm T.B.
TRANSMISSION:
Richmond 3.73's
Auburn posi
B&M Mega shifter
TCI shift kit
Vette servo
B&M 3-4 upshift kit
TCI Trans Rebuild
2800 stall 9.5" TC
Nitto Drag radials
FUTURE MODS:

BEST RUN:
12.48 @ 109.23 MPH
(with stock heads,cam,intake,and crappy Pep Boy's tires)

vortech305

thank u nitro dan now every one else follow the procedure.

------------------
92' camaro
New 305 block TPI conversion, Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system.
Soon to come!!!
Procharger system 12lbs o boost.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

Monkie

------------------
1992 Camaro RS 3.1L Check my cars out! http://hometown.aol.com/stopsign696/...age/index.html

T5 Manual 5 speed
Cold/RAM air intake
Z-28 Exhaust
8.5mm MSD Ignition wires
TB Coolant bypass


AIM screen name - Stopsign696

Kills:

95 (****) Probe GT,94 Mustang GT,91 CRX (dont ask me why he raced me),2nd Gen Z28 (350) haha to you V8 guys!,1992 RS 305 TBI (good race),First Gen Integra, Old Escort LX, 80 something Fbird
More to come

vortech305

gorgeous nice muscle car, i like the camaro whats the muscle car.

------------------
92' camaro
New 305 block TPI conversion, Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system.
Soon to come!!!
Procharger system 12lbs o boost.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

polishdevil

------------------
1987 Pontiac Trans Am GTA
5.0, Auto, T-Top, Digital Dash, etc

http://www.fbody.com/members/1987GTA/

[This message has been edited by polishdevil (edited February 23, 2001).]

[This message has been edited by polishdevil (edited February 23, 2001).]

[This message has been edited by polishdevil (edited February 23, 2001).]

zupmanZ28

flame suit on

------------------
My 1986 Z28 and more!!
view my car (movie)

R.I.P Dale Earnhardt

[This message has been edited by zupmanZ28 (edited February 24, 2001).]

vortech305

how the hell do u post a pic. I hear u need your own website or something is it difficult. All i have is a comp. scanner and the pics r downloaded what else do i need.

Fastcamaro87

hey nitrodon what is that vent for on the back of your car? just curious

------------------
87 IROC-z 305 TPI 5spd Borg warner 9-bolt 3.45 posi 4 wheel disc,8.8 Accel wires , bosch platinum +4 plugs,gutted air box,k&n oil filter,synthetic oil 10w30

zupmanZ28

Vortech,
go to www.photopoint.com and set up a free account. from there you can upload you photos for free and have them stored on the photopoint database. then you just copy the shortcut(while in guest mode) and paste it onto message with [img] at the beginning, and [/img] at the end. its quite simple and free really...

------------------
My 1986 Z28 and more!!
view my car (movie)

R.I.P Dale Earnhardt

Monkie

LOL, they are both Camaros. A 69 and 92.

vortech305

thanks ill try that by the way i knew that was a camaro possibly67' to 69' i cant wait to finally post my 92'camaro but im guessing no one whants to see the 71' duster.

------------------
92' camaro
New 305 block TPI conversion, Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system.
Soon to come!!!
Procharger system 12lbs o boost.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

zupmanZ28

vortech,
why not post the Duster? my mustang is just a few post's up from here POST IT!!

------------------
My 1986 Z28 and more!!
view my car (movie)

R.I.P Dale Earnhardt

vortech305

COULD U BE MORE SPECIFIC. I mean i got the account and downloaded my pic in their album what do i do next where do i go. Im sorry if im getting in your nerves but for some reason i cant get through please help.

------------------
92' camaro
New 305 block TPI conversion, Forged parts all around,Edelbrock intake,ported plennum,ported corvette alluminum heads, accel cam,52mm throttle bodie, SLP runners,ford SVO 19lb injectors,fuel regulator,cloys timing chain, comp alluminum roller rocker arms and pushrods MSD 8.5 mm wires, bosch plattinum plugs, hypertech cap & rotor and coil, Edelbrock TES headers, free flowing catalytic converter and a 3 inch force II flowmaster exhaust system.
Soon to come!!!
Procharger system 12lbs o boost.
Favorite quote: "where ever u go, there u are"

Other car;
1971 plymouth Duster
Mods:340,edelbrock victor jr. intake, 650 4 barrel holley, heddman headers,40 series dual flowmasters, cold air intake,4:10 gears, just got a new paint job and cragar rims with 315 tires in the back.
:Yeah its not a chevy but damn how many 71' dusters have u seen in the streets.

zupmanZ28

ok, if the pics are inn your album, open a pic, at the bottom of each one, there should be an address in a little window that says something like "if you would like to include this pic in your ebay auction..." copy that address(highlight, rightclick, hit copy). Once the address is copied, post a reply on this board, and in the text box, paste the address you copied. Then, with the whole long address in the text box, put [img] in front of it (no spaces) and [/img] at the end (again dont use spaces). When you submit your response, the photo should load. I hope this helps you out. If not I'll see if i can't go furthur in depth(it took me a little while too dont feel bad)
If your still having trouble, give me your email as it is registered w/ photopoint and I'll post them for you, so you can get the idea

85ws6TA

This is when i got it the May '99 when i was 16. this summer it will have hooker headers leading into Hooker sidepipes (the look like the shelby cobra ones...) a cheater NOS system (250 hp), drop in some 3:90s in the rear end, and it will be painted KandyBrandyWine, new leather interior, and hopefully i'll still have money for a good sound system.

You guys think i should make flames come out the exaust pipes? its pretty easy, but im almost sure it's illegal. and i know how to control it with a switch but im not to sure about doing it yet.

damn cant wait...

right now it has a -forged everything- engine, polished and ported heads, slight bore, i think its a 352-354, (made sure it wasnt 351) 10:1 compression, and a mild lift cam. tranny was beefed up and it has a b&m shift kit.

[edit] forgot, as of now it has dual exaust with free flow cats.

------------------
1985 WS6 Trans AM
T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
dual flowmaster exaust,
& a pounding stereo.
mods right now include a radar detector.


[This message has been edited by 85ws6TA (edited February 28, 2001).]

SlowCamaro88SC

heres some old time muscle, dad's '55
<img src= "http://www.nconnect.net/~briones/belair.jpg">

and here's a pic of my iroc
<img src = "http://www.nconnect.net/~briones/irocz.jpg">

and my sport coupe
<img src = "http://www.nconnect.net/~briones/camside.jpg">

no pics of the SE though.... it's too ugly for pics.

[This message has been edited by SlowCamaro88SC (edited February 24, 2001).]

deadbird

This is a guys mustang at the window shop that is part of the company I work for. I know it's a stang,, but it's a sweet **** ride anyways



You can see more nice rides like that at http://www.angelcities.com/members/g...ise/cruise.htm

------------------
My Firebird It Lives Again!!
Your Car Here?
Part Diagrams

biscwgn

------------------
My Camaro
1986 IROC 305TPI 19K mile[*]1996 TransAM conv(SOLD)[*]1995 Camaro rs(TRADED)[*]1977 Camaro LT(SOLD)[*]1973 Camaro RS (TRADED)[*]1973 Camaro LT (TRADED)[*] 1998 Camaro RS (Wives Car)

[This message has been edited by biscwgn (edited February 24, 2001).]

85ws6TA

{photopoint edit}

[This message has been edited by 85ws6TA (edited February 28, 2001).]

92camaroRSV6

85w can u post a link, the picture is an "x"

85ws6TA

{edit for photopoint}

[This message has been edited by 85ws6TA (edited February 28, 2001).]

85ws6TA

there, switched to photopoint

------------------
1985 WS6 Trans AM
T-tops
bone stock sloth of an engine LG4
T-5 tranny. thank god, i couldnt stand an LG4 auto.
Plans for an LT-1 or LT-4,
dual flowmaster exaust,
& a pounding stereo.
mods right now include a radar detector.