rideon1200

I recently had a 350 installed in my car. The guy really built up a nice looking POWERFUL motor. When I was over there this weekend I notied the engine is taller. I remember from time to time pics of hood scoops installed. Could you post pics so I can get some ideas. Dont want cowl, everyone has one of those.

nelapse

iTrader: (17)

Hood scoops look silly, and functional ones make your engine bay dirty. This is my opinion.

1988CamaroSC

iTrader: (2)

everyone may have a cowl, but around here i am one of 2 and i live in a heavily populated area. now yes maybe theres 30 more that never leave the garage but im one of 2 that i can see. i went with it because i wanted a steel hood not fiberglass...

Night rider327

iTrader: (13)

I have had 2 diff ones on my 1988 camaro. Just to get it on the road and fit my car/intake/air cleaner I bought a 427 corvette stinger style scoop, cut hole in hood and rivited it onto my stock hood.

Then later on to save weight and to fit a taller intake/carb package I went to a 4" cowl

Here's pics of both.
Here's the vette stinger scoop......
http://rides.webshots.com/photo/1464...41290424fXHYSw
http://rides.webshots.com/photo/1464...41290424QASuku
http://rides.webshots.com/photo/1477...41290424hHkXxe

Here's the 4" cowl hood
http://rides.webshots.com/photo/1501...41290424xcxiuX
http://rides.webshots.com/photo/1501...41290424VHqziY
http://rides.webshots.com/photo/2699...41290424YrInoJ

5678TA

hood scoop?? look no further.. hahaha

this is mine


https://www.thirdgen.org/forums/atta...e-dsc00022.jpg
https://www.thirdgen.org/forums/atta...e-dsc00427.jpg
https://www.thirdgen.org/forums/atta...d-dsc00426.jpg
https://www.thirdgen.org/forums/atta...dsc00425-1.jpg
https://www.thirdgen.org/forums/atta...n-dsc00490.jpg

chevyowner02

iTrader: (3)

1988CamaroSC, Where did you get the steel hat at?

InfernalVortex

iTrader: (4)

I was lookin at those pictures and I said to myself "Damn, that looks a LOT like Georgia..."

And I went back to check your location....

Night rider327

iTrader: (13)

Yep, Kinda hard to miss the Georgia pines, pine straw, red clay, dirt yards, and junk cars everywhere you look lol

Charlie319

This is my old firebird. Bought new about 100,000 miles ago.

Charlie319

This is my old firebird. Bought new about 100,000 miles ago.

strokermotor91

[quote=Night rider327;3307874]I have had 2 diff ones on my 1988 camaro. Just to get it on the road and fit my car/intake/air cleaner I bought a 427 corvette stinger style scoop, cut hole in hood and rivited it onto my stock hood.

Then later on to save weight and to fit a taller intake/carb package I went to a 4" cowl


I just love the looks of the 4" cowl hoods. You cant' see anything on the passenger side but you get used to it. Heres a pic of my car and hood.

Toyota h8r

that car sounds/looks so nice! Also, the burnout was really nice....you still have the vid?

urmomshot77

Same thing he said

5678TA

thank you for the compliments.. and yes, i still have the videos.. heres a link to the page of all of the videos..

http://videos.streetfire.net/uploaded/5678ta.htm

f1200racer

rideon1200 heres a pic of mine. i know the hood isnt down but its only pic of my car i have on this computer. Ive got the prostock style. I think it looks good ill try to take a pic with the hood down tomorrow.

Demon355

iTrader: (1)

1988CamaroSC

iTrader: (2)

summit, its made by goodmark, it was like mid 500's shipped.

bgood71

this is prior to being painted

bgood71

and 1 after paint

1988CamaroSC

iTrader: (2)

real nice b, got any pics of the whole car?

bgood71

this is the only one, its got the 4th gen spoiler to go with the hood

2tonedmaro89

here is mine its a fake 2" cowl

Saigon_Bob

iTrader: (2)

My car with the cowl... is a fake 2" molded onto the stock hood, with the center cut out for the air cleaner... White is on my other camaro b4 i swapped it... and black primer is just becuz i was bored

ssean92

iTrader: (10)

this is the one I am using. I love the look on a lowered car!!!!!!!!!

fastcar06

your standard, run of the mill, everyday, basic, stock looking, everybody's got one, my last car had one, my next car will have one, cowl hood.

5678TA

what kind of motor is going in that beast??

fastcar06

it's currently a pretty mild 355 with ported edelbrock rpm heads, 11.5 to 1 pistons, .575 solid cam, and 750 q/f carb. my goal was to get the car running on this combo and build a 406 during the winter. of course three winters have passed and the car still is not done. the car is being built for the street with the ability to go real fast if i can afford to in the future. i put a ford 9" detroit locker in it with a four link and 12 pt cage. at this point more of a show car than a racer.

ws6gta89

That would look sexy with the 01-02 trans am wheels,it would really flow with the hood and spoiler then you could sell me your front rims=)

5678TA

looks great.. thats gonna be one hell of a show car.. lol show and go, as they say.. rev that thing to the moon..

firebird89355

here is one of mine that i fiberglassed onto a flat hood night rider327 has seen it in person i think hell agree it looks pretty darn good. THOMAS

firebird89355

here is one of mine that i fiberglassed onto a flat hood night rider327 has seen it in person i think hell agree it looks pretty darn good. THOMAS

DomsIROC

iTrader: (1)

I am a fan of the stock/sleeper look. They hear you coming and see you going. All you need is motor and lots of HP...................