BADNBLK

iTrader: (11)

Wow what a month this is! We have some awesome cars nominated, so good lucking picking just one.

Orr89RocZ



1MeanZ



BIG_MODS



1986Z28OWNER



xpndbl3



mw66nova



ray jr.

Twin_Turbo

iTrader: (25)

poll option missing?

BADNBLK

iTrader: (11)

No, your just quick draw Mcgraw on posting! It posts the page, then takes me to the poll to create the poll... usually try to hurry through so its only a minute or so behind

mw66nova

iTrader: (13)

THANKS FOR THE NOMINATIONS GUYS! gonna be a tough month, some hardcore cars on here.

Specs on the SpeedMu11et:

1990 Camaro RS (sportcoupe clone)
fourthgen dash swap, full autometer gauges
370" lsx based engine
-11.2:1
-750 holley on top of super victor
-Tick Performance "Malicious Mu11et" camshaft
-PRC Stage 2.5 ls6 heads
-Hawks/SSW longtubes
-WRC y-pipe and single 4" to the bumper

T56
-Tick Performance stage 2 rebuild
-Tick Performance billet adjustable master
-Tick Performance remote bleeder
-Monster level 3 clutch and 28lb steel flywheel

Moser 9"
-nodular iron case
-4.11's
-31 spline Moser axles and spool
-Aerospace Components rear drag brakes
-Spohn lca's/panhard rod
-BMR extreme anti roll bar
-BMR lca rb's
-Jegster sfc's
-Jegster TA
-Comp Eng roll bar kit.
-M/T 26x10.0 Stiffwalls

so far the best pass with this combo was made two weekends ago at the YB Nats, the car ran a 10.91 @ 127mph. we got a ton of data and plan to hit it hard with a gear change and some shocks. hope to have the car in the 10.6 range with the nice air this fall. all the pics and video on this post where taken at YB Nats, so they're as up to date as they can be.

http://www.youtube.com/watch?v=hZ3-p...ature=youtu.be

Javier87z28

iTrader: (1)

Some beautiful cars this month!

Ingram78

Gotta vote for another fellow bullet member!!lol
Like what you did with the window switches too.

Hope you win Matt

xpndbl3

iTrader: (5)

engine:
gen 3
custom ground cam
super vic
cold fusion direct port fogger
950 quick fuel
1" HVH spacer
Home made 1 7/8" stepped to 2" headers with 3.5" collectors, ceramic coated inside and out, tig'd inside and out


Fuel pump: magnafuel pro star 500, regulator and quick fuel regulator for nitrous, -10 feed
Nitrous: cold fusion direct port,bent from Rob at A-team performance
Trans: Th400, transbrake, PTC 8" 4900 rpm converter

Behind bars chro moly LCA and panhard, QA1 rod ends

Mini tubed and wolfe spring kit in my garage


4th gen dash, all autometer gauges, 4th gen console
AEM wideband
Kirkey race seats
Jegs torque arm and subframe connectors
Comp engineering 6 point, welded in by me as well.

Pretty much all garage built and tuned by me.

Car runs good for what it is.

1986Z28OWNER

iTrader: (1)

Thanks for the nominations everyone. Its an honor to be included in this.

The car is a 1986 camaro z28. Original 305 5 speed car.

The car itself has a custom bent 10 point cage. I body worked and primed the car myself. I converted it to manual steering and brakes and gutted as much weight out of it as I could. It sits on billet specialties streetlites 15 x 3.5 in the front and 15x10 in the rear. The rear tire is a 28 x 11.50 et street.

Engine:
Vortec headed 383. 10.3:1 cr, custom hydraulic roller cam, AED 750HP HO carburetor, and a 150 shot of nitrous. Future plans are in the works and include a twin 67mm billet precision turbocharged 400 cubic inch small block.

Transmission is a tremec tko600, ram powergrip hd clutch, mark williams 3.5" chromoly drive shaft with billey yokes. Moser back braced 9" housing, 31 spline axles, strange nodular center section, spool and 4.11 gears.

Suspension is spohn double adj lca's and phb. Spohn pro series torque arm, comp engineering 90/10 struts and 3 way adj shocks. Moroso trick springs, pa racing tubular a arms and caster camber plates. Spohn extreme anti roll bar.

It also has a complete aeromotive fuel system, a1000 pump, 10 feed and 8 return and a bypass regulator. Also has a complete auxiliary fuel system for the nitrous.

some pics from a recent photoshoot.

Also be sure to check out my build thread!!!

Yahtzee

Hmmm 3 of my all time Favorite 3rd Gens are competing in this. This is gonna be a tough decision but I think I got my choice figured out.

Good luck guys!!

plum92_camaro

This month was easy for me. All these cars are BA but as an autoX/road racer I had to go with big mods. His car has been an inspiration to me.

BIG_MODS

iTrader: (9)

thanks Plum! And thanks for the nominations everyone else!

I built my car with 2 main purposes in mind:
A) be able to kick a$$ on the road course
B) be able to street drive and turn some heads
I think I've done pretty well on both accounts so far.

Here are some track vids.
Mid Ohio yesterday: Grattan over labor day weekend: Gingerman in July: Here is some abuse of some Japanese cars (this really isn't fair :-) ) Fast forward to the 5:00 mark: Here is some fun on track with some much faster cars:
Each time I go to the track I get faster due impart to A) driver improvements and B) Tuning and mods that I continue to make. It really is a thrill, if you haven't been to an open track event you should add it to your bucket list.

In 2012 1MeanZ and I drove this car on the Hot Rod Power Tour. I got lucky and HRM saw my car and liked it enough to do a feature on it!
http://www.hotrod.com/featuredvehicl...aro_third_gen/ Probably the biggest honor in my life!

Here are some of their pic:




















Jerico 4 speed,, spur gears and dog rings Cluchless is OK! Grip and Rip! Watch the videos for the sound!

BIG_MODS

iTrader: (9)

decouple torque arm that I made:


Accusump, Lowered PHB and new support bar, and my 8.6" Aluminum center section axle:


Side Exit Exhaust:


My Blue Collar Brake kit that I put together and I'm selling sets of:







Brake cooling ducts, rod end sway bar end links




Most of the rest of the mods are in the Hot Rod article http://www.hotrod.com/featuredvehicl...aro_third_gen/

BIG_MODS

iTrader: (9)

Track Photos:




Matt Trombley's rain pic:


I hope that's enough pictures!

Passmenow

I voted for Big Mods, its the car I would most want to drive on the track.

BADNBLK

iTrader: (11)

Man there is a huge amount of participation this month in the voting! Guess that's what happens when you get 7 of the best for a head to head!

Couple of these cars I'm surprised don't have some more votes. Keep it up everyone!

Blade09

I went with Orr, may not be the fastest or the cleanest but he proved that anyone can build a monster on a reasonable budget. Plus, he's one of the most helpful people on this forum. I see his posts pop up everywhere.

Keep up the good work guys!

Linson

OrrRoc.

MamaJAMA

won't let me vote...

BADNBLK

iTrader: (11)

Your too new. After 30 days you will be allowed to vote. This prevents people from joining the site just to vote for a member.

11ellswray

iTrader: (1)

awesome cars! I wanna know more about Ray jr. and 1meanz before I cast my vote!

camaroyoungster

Mw66nova, I want to make my sport coupe like yours!

Inpheksion

Mw66nova's got my vote. A sweet race car that was very cleanly built, and a lot of work has gone into. He is also a very helpful dude and very knowledgeable.

Passmenow

Combining 1 road race car with a few drag cars makes for an interesting poll.
Since more here relate to drag racing those cars are getting more of the votes.
Mb since there are 4 drag cars the drag race vote has been spread out where the road race crowd only has one dog in the fight.

mw66nova

iTrader: (13)

1meanZ is a road race/autox car.

Thanks for the kind words and votes guys! Would be a cool month to win cause my birthday is in October.

IMissMy86TA

Big_mods car is just plain sharp. all are great but his really appeals to me.

cam-

I dont see the correct button, I vote for ALL of the above, awesome cars, every last one of em

kcgperformance

I have to be honest I Voted for Matt's car for a variety of reasons, Mostly because He does so much for our community (3rd gen), but also because it's truly a well built car. If He had not been nominated, Big Mods would definitely have gotten my vote. His car is quite impressive to say the least.

-Kevin

xpndbl3

iTrader: (5)

Well as ricky bobby says.....if you're not first you're last.


Congrats matt!