Blisters and 4th Gen Seats!
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Blisters and 4th Gen Seats!
I got my car back from the shop, and all I can say is :hail: !! This was done on a regular stock flat hood and the blisters were purchased from Next Generation (Year One). Here's a picture!
Also today I installed 2001 ebony leather seats into my car. They are BEAUTIFUL! They are definately more comfortable then the other seats that were in there. The job wasn't really all that hard at all. I did as most others did with the belt holders, I made a small cut between the two screws where it attaches to the headrests. You can hardly notice it from a distance. The seat belt holder from the 3rd gen back seats were reused on the new ones. They transferred with no problems! I put black electical tape around the posts from the other seats since they were 50/50 split.
Here's one more picture..... Since my family and I were all doing car work/washing today I figured I'd snap a photo of one of my parents cars, lets see if any of you guys can guess the year/make/model.... hehe
Also today I installed 2001 ebony leather seats into my car. They are BEAUTIFUL! They are definately more comfortable then the other seats that were in there. The job wasn't really all that hard at all. I did as most others did with the belt holders, I made a small cut between the two screws where it attaches to the headrests. You can hardly notice it from a distance. The seat belt holder from the 3rd gen back seats were reused on the new ones. They transferred with no problems! I put black electical tape around the posts from the other seats since they were 50/50 split.
Here's one more picture..... Since my family and I were all doing car work/washing today I figured I'd snap a photo of one of my parents cars, lets see if any of you guys can guess the year/make/model.... hehe
#4
Senior Member
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
looks good! i hope the rest of that red is going tho....it makes the car look like a fisher price toy or something
my red went bye bye long ago.
my red went bye bye long ago.
#5
Senior Member
Join Date: May 2002
Location: www.hrfbody.com
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Car: www.hrfbody.com
Engine: www.hrfbody.com
Whoa! Thats pretty damn bright red, but it looks so awesome. The blisters are totally kick ***. I plan on replacing my louvers for blisters.
#6
Member
Join Date: Feb 2000
Location: San Antonio, Tx
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 Camaro Z28/1995 Camaro Z28
Engine: just a little 5.7(LS1-320/340 RW)
Transmission: SMOOOOOOTH T-56/Auto. . .
Axle/Gears: 3.42 and 2.73
Might I guess a 1966 Sunbeam Tiger? ? ? Says Tiger on side and Sunbeam on hood. . .
#7
Supreme Member
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
I've got the same seats ready to go into my GTA. My red interior is also gone . Question: The wiring harnesses that go between the seats...how many were there? Hawks forgot to send me mine. I checked the dealer and they want way over $100 dollars for them. Also, how did you wire in the power? Is there a separate 2 wires apart from the 6 wire connector?
Looks great man.
Looks great man.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by Duffster
Might I guess a 1966 Sunbeam Tiger? ? ? Says Tiger on side and Sunbeam on hood. . .
Might I guess a 1966 Sunbeam Tiger? ? ? Says Tiger on side and Sunbeam on hood. . .
#9
Supreme Member
Join Date: Nov 2000
Location: Newark, DE
Posts: 1,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Z28
Engine: 355
Transmission: T-56
I was gonna say a Tiger. My grandpa has a 63 Sunbeam Alpine that he's owned since new. It's absolutely beautiful, but it's got a blown headgasket Nice seats too, that almost makes me wish i had gone with leather on mine...
Eric
Eric
#12
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by Blue502
Looks sweet! What mods did your body shop have to do to make the blisters fit?
Looks sweet! What mods did your body shop have to do to make the blisters fit?
#13
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by HrdRockA4305
I put those same seats in about 2 weeks ago, they rock!
I put those same seats in about 2 weeks ago, they rock!
#14
Supreme Member
iTrader: (15)
Join Date: Jan 2001
Posts: 8,030
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 383 stroker
Transmission: 700R4 3500 stall, TransGo shift kit
Axle/Gears: Moser 9", 4.11:1
The blisters and seats look awesome. I wanna get blisters on my IROC someday. Are you gonna keep the red carpet? It looks brand new, not faded at all.
#15
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by MetalliCamaroRS
The blisters and seats look awesome. I wanna get blisters on my IROC someday. Are you gonna keep the red carpet? It looks brand new, not faded at all.
The blisters and seats look awesome. I wanna get blisters on my IROC someday. Are you gonna keep the red carpet? It looks brand new, not faded at all.
#17
Supreme Member
iTrader: (1)
Join Date: Apr 2001
Location: In the state of bliss
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Pontiac Firebird
Engine: 2.5L Iron Duke 4 cylinder
Transmission: 5 speed manual
I know most of you will agree leather is the way to go, but I think these seats may have gone a little better with the previous interior color. Just my opinion....
I'll trade ya!
I'll trade ya!
#18
Member
Join Date: May 2001
Location: Staten Island, New York, USA
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Iroc Z "Classic Roc"
Engine: 5.7 350
Transmission: Auto
WOW! The alignment on that hood is damn near perfect!!!! Are the blisters functional? They sure look it. Nice job.
#19
Supreme Member
Join Date: Mar 2001
Location: Pekin, IL
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula, 79 Trans Am, 72 LeMans
Engine: 305 TPI, 6.6, 350 Pontiac
Transmission: T5, 3 speed, TH350
Nice, I love the interior. I have red too and for some stange reason I like red. Dont know why though.
#20
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by USA-1
WOW! The alignment on that hood is damn near perfect!!!! Are the blisters functional? They sure look it. Nice job.
WOW! The alignment on that hood is damn near perfect!!!! Are the blisters functional? They sure look it. Nice job.
#21
Supreme Member
Yeah, I went leather cause I got a good deal, but the 2 color cloth seats are really sharp looking in our cars. Originally, since I have a black/grey interior, I was going to go with those. I figure they look really good in "billsfirebird" with the grey/red, so black/grey would be good. But, then I came across this deal, heard from a freind who heard from a freind, you know
#22
Supreme Member
Join Date: Mar 2001
Location: Pekin, IL
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula, 79 Trans Am, 72 LeMans
Engine: 305 TPI, 6.6, 350 Pontiac
Transmission: T5, 3 speed, TH350
I'm wondering if I shoulda told you about those seats, They look good in your car dave, better than those seat covers!!
#25
ah...
nice look, I did that to mine a few months ago and added chrome C5 wheels, you can see all the pics you want here...
http://www.soundsolutionsaudio.com/z28forsale.html
http://www.soundsolutionsaudio.com/z28forsale.html
#26
Supreme Member
Join Date: Oct 2001
Location: Fort Belvoir, VA USA
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
Car: 94 Camaro
Engine: 3.4L
Transmission: 4l60e
WWasem,
needless to say, i am completly jealous. You have turned that 60* into one amazing machine. Keep up the good work.
Agian thanks for the help with the Strut Tower Brace info a while back...
needless to say, i am completly jealous. You have turned that 60* into one amazing machine. Keep up the good work.
Agian thanks for the help with the Strut Tower Brace info a while back...
#27
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Lehigh Valley, PA
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 T/A Firehawk
Engine: 346ci LS1
Transmission: MN6
Axle/Gears: 3.42 LSD
Originally posted by stuart69427
WWasem,
needless to say, i am completly jealous. You have turned that 60* into one amazing machine. Keep up the good work.
Agian thanks for the help with the Strut Tower Brace info a while back...
WWasem,
needless to say, i am completly jealous. You have turned that 60* into one amazing machine. Keep up the good work.
Agian thanks for the help with the Strut Tower Brace info a while back...
#29
Supreme Member
Join Date: Mar 2001
Location: Pekin, IL
Posts: 1,754
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula, 79 Trans Am, 72 LeMans
Engine: 305 TPI, 6.6, 350 Pontiac
Transmission: T5, 3 speed, TH350
"Hey you gotta admit though, for seat covers, they looked good."
True...
True...
Thread
Thread Starter
Forum
Replies
Last Post