I didn't realize I had done this....
#1
Member
Thread Starter
Join Date: Feb 2002
Location: Maine
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I didn't realize I had done this....
well my 'maro sat out all winter with no car cover because my parents had gotten me a tarp instead of a car cover and by the time i had money for a car cover, it had already snowed. well i went out to take out the battery, but the door was iced shut. so i yanked on the bastard, not realizing i would damage something. now it's spring and guess what? i can't open my driver's side door. any suggestions on how to fix it. and my hood won't open.
#2
Junior Member
Join Date: Dec 2002
Location: Auburn, MI
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Don't think I can help you on the door. But the hood I might be able to. Have someone pull the hood release, then while there holding it in the releasing position...hit the hood real hard right above where the latch is. Some times it helps to sort of bounce your weight off of it. If you do get it open, put some wd40 on the cable and linkage in there then pull the release from inside the car a few times to free things up.
#3
Supreme Member
Join Date: Jul 2001
Location: Cove, Arkansas
Posts: 2,760
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro SC
Engine: V6
Transmission: 700r4
Most likely you broke your door handle rod inside of the door, or bent it and it poped out of its holder. One way or another you'll have to take off your door panel to fix the problem. You can open the door from the inside right? As for the hood I wouldnt pound on it just push down ontop of the latch area and the hood should pop up to the latch release postition. I have that proplem on my car alot.
#5
Supreme Member
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 1,047
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Firebird, 2000 GTP
Engine: 327
Transmission: 700R4
Axle/Gears: 9" posi, 4.11
I don't know if it's the same on Camaros as it is on Birds, but, if you crawl a little under the front, you can reach up and unlatch the hood.. I found this out back when I was looking for a car... this way I could look at the motor without the keys. Since, I have decided to make a cover... don't want people opening my hood when I'm not around.
Anyway, like they said, just lube the hood latch.. I used transmission oil.. I think that is not supposed to attract dirt as much... I'm not sure. I used to have to pull the hood realease, push the handle back in, then walk to the hood and give it a tap... nothing that would bend any metal, but enough to shock it to break loose. I'd suggest opening from the bottom because then you can manipulate the latch any way you need to until it opens.
Anyway, like they said, just lube the hood latch.. I used transmission oil.. I think that is not supposed to attract dirt as much... I'm not sure. I used to have to pull the hood realease, push the handle back in, then walk to the hood and give it a tap... nothing that would bend any metal, but enough to shock it to break loose. I'd suggest opening from the bottom because then you can manipulate the latch any way you need to until it opens.
#6
Member
Thread Starter
Join Date: Feb 2002
Location: Maine
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
i can get in the passenger door and open the driver's door from inside. so i know the handle from the outside had something break or come loose. i've never taken the door panel apart before, any suggestions? i'm going out in a few hours to try it, i just don't want to break anything else as it seems like that's how my spring is going with my car.
#7
Supreme Member
Join Date: Sep 2002
Location: Norwalk, Iowa
Posts: 1,834
Likes: 0
Received 0 Likes
on
0 Posts
this thread has how to get the door panels off
https://www.thirdgen.org/techbb2/sho...hreadid=112183
https://www.thirdgen.org/techbb2/sho...hreadid=112183
Thread
Thread Starter
Forum
Replies
Last Post
luvofjah
Engine/Drivetrain/Suspension Parts for Sale
13
09-26-2015 08:28 PM
Mongoose462ci
North East Region
0
09-16-2015 11:46 PM