Best Interiors
#1
Best Interiors
Hello Everybody. I dont have my car yet. Ill be getting it around august. Im planning on getting a black 1992 Camaro RS. After i get it im going to make it look all pretty. Im going to black out the headlights and taillights. Then im going to get a Racing wing on the back, ive seen them on some camaros i like them alot. then im going to tint the windows. Then i will eventually get dual chrome tail pipes. I know what i want the outside to look like but i dont know about the interior yet. SO LETS SEE NOW. SHOW OFF YOU INTERIORS. LETS SEE WHO HAS A NICE INTERIOR. COME ON DONT BE SHY!!!
#2
Supreme Member
iTrader: (1)
I would bail on the retarded wing idea. The stock spoiler is just fine. Every ryce rocket and Honda around has one of those. You don't need the extra weight. Don't forget that they weren't designed for our cars. Our cars were designed in a wind tunnel. They don't need anythig like that. They do more harm then good.
Of course it is your car. Or it will be. Do what ever you wish to it. But I think the wings are as tasteless as door chrome and chrome fender flares.
Of course it is your car. Or it will be. Do what ever you wish to it. But I think the wings are as tasteless as door chrome and chrome fender flares.
#3
Senior Member
Join Date: Jan 2003
Location: San Francisco,Ca area
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Please don't turn your camaro into a crappy r*ce rocket looking thing. It would be a disgrace. In my opinion blackouts look terrible as well. But hey what do I know, right? A fourth gen interior is always a nice thing to do though.
#4
TGO Supporter
Join Date: Sep 2000
Location: So.west IN
Posts: 6,775
Likes: 0
Received 26 Likes
on
23 Posts
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
A)He's a new member
B)He's asking for pictures of interiors, not what you think/opinions about his wing choice.
Just post a picture or don't post. It's not that hard to do.
My interior is in need of sprucing up. I did however, pick up a set of 4thgen seats from a local pull-a-part yard that helped breathe a little new life into my 'still need of updating' interior next on the 'round-to list is a 4thgen console since my original one is toast...
B)He's asking for pictures of interiors, not what you think/opinions about his wing choice.
Just post a picture or don't post. It's not that hard to do.
My interior is in need of sprucing up. I did however, pick up a set of 4thgen seats from a local pull-a-part yard that helped breathe a little new life into my 'still need of updating' interior next on the 'round-to list is a 4thgen console since my original one is toast...
#6
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 164 Likes
on
119 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Here is mine...
I do what I want to my car, I give you the same option...
John
I do what I want to my car, I give you the same option...
John
Trending Topics
#11
Hell No!
what are you talking about. I dont mean no ****ing ***** wing my *** what are you smoking. Im not that retarded. give me some more credit than that. Ill try and post a picture of what i am talking about. Lets see some more interiors thought!
Here is the wing
http://www.camaro-3gen.com/images/chmsl91.jpg
Here is the wing
http://www.camaro-3gen.com/images/chmsl91.jpg
#12
Here are more pictures of the wing i was talking about. Please people i hate those **** rockets just as much as any of you. but i still do like those black outs. Now is this wing better than what you guys were thinking?
http://www.sarona.com/chevy_cadillac/wing_6.jpg
http://www.dmcarclub.com/members_pag...n/cleanZ28.jpg
http://www.sarona.com/chevy_cadillac/wing_6.jpg
http://www.dmcarclub.com/members_pag...n/cleanZ28.jpg
#13
Senior Member
Join Date: Dec 2001
Location: Amarillo, Tx
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 355TPI 380hp
Transmission: Rebuilt 700r w/ Transgo Shift Kit
I say stick with the blackouts, I love them. Also I'm glad to hear you wanted the high rise spoiler, I too thought you were talking about those FATF Wings.
#17
Senior Member
Join Date: Dec 2001
Location: Amarillo, Tx
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 355TPI 380hp
Transmission: Rebuilt 700r w/ Transgo Shift Kit
Thanks DarkKnight,
Here's a few interior pics just to keep with the subject...
Here's a few interior pics just to keep with the subject...
#18
Supreme Member
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,164
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Here's a picture of my interior in the 1987 (totalled). Don't know what I'm going to do with it yet, as the black interior panels won't fit the 91.
:hail:
:hail:
#20
Supreme Member
Join Date: Mar 2003
Location: Severn, MD.
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 T/A and '90 T/A
Engine: LB9/383
Transmission: T5/700R4
Those are just GTA door panels that you can pick up at a salvage yard or ebay pretty cheap and use fabric dye from pep boys to make them any color you want.
#22
my sub box is the only thing worth looking at but check it out at the link below, carpeted its real nice
http://www.cardomain.com/id/yellow86z
http://www.cardomain.com/id/yellow86z
#23
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Marietta, GA
Posts: 2,024
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: LS1
Transmission: T56
Axle/Gears: 3.73 10 bolt
Nice interiors guys, ive always been a fan of powermite's, and i really like okfoz's too
Red interior on a black car looks really good IMO especially if you add some red stripes to it.
heres a couple pics of my interior, just some fourth gen leather, and a fire exstinguisher i found in my garage..ive got neons under the seats but i dont think you can see them in the pics
Red interior on a black car looks really good IMO especially if you add some red stripes to it.
heres a couple pics of my interior, just some fourth gen leather, and a fire exstinguisher i found in my garage..ive got neons under the seats but i dont think you can see them in the pics
#25
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Marietta, GA
Posts: 2,024
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: LS1
Transmission: T56
Axle/Gears: 3.73 10 bolt
Heres an interior in a 4th gen i found on car domain, not mine..but i wish it was! Even tho its 4th gen it could be done in a third..youd just need a whole lot of time and money.
#27
Junior Member
Join Date: Mar 2003
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Trans Am
Engine: TPI 305
Transmission: 700 r4
Have you ever looked at www.mrmikes.com they offer some absolutely gorgeous interior kits, somewhat pricey, but beatiful, and they are very durable
#29
Senior Member
Join Date: Dec 2001
Location: Amarillo, Tx
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 355TPI 380hp
Transmission: Rebuilt 700r w/ Transgo Shift Kit
4th Gen. Seats 2003 Firebird - $1100
New Black Carpet - $199
Black Plastic Panels - $400
Black Seat Belts (full set) - $60
Nice Interior - Priceless
New Black Carpet - $199
Black Plastic Panels - $400
Black Seat Belts (full set) - $60
Nice Interior - Priceless
#31
Senior Member
Join Date: Dec 2001
Location: Amarillo, Tx
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 355TPI 380hp
Transmission: Rebuilt 700r w/ Transgo Shift Kit
From what I understand, the console is pretty close to a direct swap in Firebirds and TAs, but for Camaros, it takes some modding to the original console to make it work. As far as the seats are concerned, direct swap. Unbolt Old, Bolt Up New.
#33
Senior Member
Join Date: Feb 2002
Location: Sacramento, CA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Car: See pic above
Engine: Too Small
Transmission: Broken
If you go to my website (link in sig) you can see my various interior upgrades. Probably the biggest change was custom door panels without a door handle.
#34
Senior Member
Join Date: Feb 2002
Location: Sacramento, CA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Car: See pic above
Engine: Too Small
Transmission: Broken
Originally posted by jgifford
From what I understand, the console is pretty close to a direct swap in Firebirds and TAs, but for Camaros, it takes some modding to the original console to make it work. As far as the seats are concerned, direct swap. Unbolt Old, Bolt Up New.
From what I understand, the console is pretty close to a direct swap in Firebirds and TAs, but for Camaros, it takes some modding to the original console to make it work. As far as the seats are concerned, direct swap. Unbolt Old, Bolt Up New.
#35
You are correct sir! The problem is that the radio/HVAC controls are in a seperate pod in the birds but is built into the center console on the camaros. But it has been done before, looks a little bit hacked tho.
#36
Senior Member
Join Date: Dec 2001
Location: Amarillo, Tx
Posts: 520
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 355TPI 380hp
Transmission: Rebuilt 700r w/ Transgo Shift Kit
I'll have to admit, most camaro conversions to 4th gen console lacked the skill and patience, but that is just A+ work, I've seen pics in earlier posts of it, and all around looks fantastic.
#42
Senior Member
Join Date: Feb 2002
Location: Sacramento, CA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Car: See pic above
Engine: Too Small
Transmission: Broken
Seats with brackets: ~$800
Door panels: ~$150
Back seat cover: $60
Shaved door handle kit: $100
PSone, LCD screen, and associated cables:~$300
so about $1410, so far...
That's not including the stereo, I don't even want to think about how much that is.
The moral of the story: Beware, once you start to customize you may never stop. I don't know about everyone else here, but once I go to do one thing, I end up doing three other things at the same time. When I decided to shave the door handles, I ended up with new door panels. And since I was cutting up the inside of the door anyway, I might as well convert to power windows..... You get the idea.
Door panels: ~$150
Back seat cover: $60
Shaved door handle kit: $100
PSone, LCD screen, and associated cables:~$300
so about $1410, so far...
That's not including the stereo, I don't even want to think about how much that is.
The moral of the story: Beware, once you start to customize you may never stop. I don't know about everyone else here, but once I go to do one thing, I end up doing three other things at the same time. When I decided to shave the door handles, I ended up with new door panels. And since I was cutting up the inside of the door anyway, I might as well convert to power windows..... You get the idea.
#43
Originally posted by joezero
The moral of the story: Beware, once you start to customize you may never stop. I don't know about everyone else here, but once I go to do one thing, I end up doing three other things at the same time. When I decided to shave the door handles, I ended up with new door panels. And since I was cutting up the inside of the door anyway, I might as well convert to power windows..... You get the idea.
The moral of the story: Beware, once you start to customize you may never stop. I don't know about everyone else here, but once I go to do one thing, I end up doing three other things at the same time. When I decided to shave the door handles, I ended up with new door panels. And since I was cutting up the inside of the door anyway, I might as well convert to power windows..... You get the idea.
Now my car has turned into a black hole, that sucks all my money......It's making my girlfriend jealous....
#44
Senior Member
Join Date: Apr 2000
Location: Anoka, Mn
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by powermite
Here's mine.
PM
Here's mine.
PM
powermite, is that stainless steel for the radio bezel and shiftplate? Or is it painted? It looks very very nice. :hail:
#45
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Marietta, GA
Posts: 2,024
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: LS1
Transmission: T56
Axle/Gears: 3.73 10 bolt
I paid $550 for my seats with shipping from cali, and about the same on my stereo..need to buy a new dash pad thoso thatll be nother 200 which was gonna be spent on white face guages and a dash kit
sorry to answer someone else question but i dunno if he'll check this thread. Powermite has custom bade brushed aluminum in his car i think its just on the console, and then he put rings around his guages..the console even sais pontiac on it! Theres actually someone on ebay offering brushed aluminium dash kits for our cars for like $100 ..ive never actually seen anyone thats bought one tho, like i said i was getting one buttt im goin for my third dash pad instead!!
sorry to answer someone else question but i dunno if he'll check this thread. Powermite has custom bade brushed aluminum in his car i think its just on the console, and then he put rings around his guages..the console even sais pontiac on it! Theres actually someone on ebay offering brushed aluminium dash kits for our cars for like $100 ..ive never actually seen anyone thats bought one tho, like i said i was getting one buttt im goin for my third dash pad instead!!
#46
Senior Member
Join Date: Feb 2002
Location: Sacramento, CA
Posts: 904
Likes: 0
Received 0 Likes
on
0 Posts
Car: See pic above
Engine: Too Small
Transmission: Broken
I've seen those aluminum dash kits on ebay too. I kind of wondered about their quality tho because last I saw they didn't post pics of it installed, just diagrams of what the pieces looked like.
#47
Member
Join Date: Feb 2002
Location: BC Canada
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: ......
Transmission: ......
Seats= $600, Custom door panels= $500, sun visors= $50, rear bench=$400, all in total after tax... $2000 canadian
Shaved door handle kit $300
Shaved door handle kit $300
#48
Member
iTrader: (13)
Join Date: Aug 2002
Location: Sandusky, OH
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Trans Am
Engine: 305 Carb
Transmission: 700R4
powermite
Are those aluminum or stainless trim rings around the guages? Really nice :hail: , where did you get them? Have considered doing something similar with the dash and those might be just what I am looking for.
Are those aluminum or stainless trim rings around the guages? Really nice :hail: , where did you get them? Have considered doing something similar with the dash and those might be just what I am looking for.
#49
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 164 Likes
on
119 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
$2300.00
#50
Senior Member
Join Date: Feb 2001
Location: united kingdom
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Car: Transam
Engine: ZZ4,Holley Stealth Ram,Commander 950
Transmission: T56
I made all the aluminium from billet.None of it are covers over the plastic,I have machined them to fit on their own.
The trim rings were quite easy but the rest took a long time and a lot of thought.
PM
The trim rings were quite easy but the rest took a long time and a lot of thought.
PM