HOW DO I FIX THIS?
#1
HOW DO I FIX THIS?
alright so i've been told i can fix these fairly large cracks with bondo. the question is... will that actually work and if it will do i have to take all the paint off or can i just smooth it off and paint over it and make it a quick 20 mins job? got pictures of it don't worry.
http://www.cardomain.com/ride/2534224
the pictures are on the second page.
http://www.cardomain.com/ride/2534224
the pictures are on the second page.
#2
Supreme Member
Join Date: Jun 2003
Location: Massachusetts
Posts: 1,985
Likes: 0
Received 1 Like
on
1 Post
Car: candy blue 85 z28
Engine: 305 tpi LB9
Transmission: 700r4 crazy beefed up one
Axle/Gears: ones with teeth
load the pic here, make it easy for us....
oh and without seing the pic... no such things as an easy 20 min job. unless you dont care if its done wrong.
jeff
oh and without seing the pic... no such things as an easy 20 min job. unless you dont care if its done wrong.
jeff
#3
Supreme Member
Join Date: Feb 2004
Location: Munster IN
Posts: 1,159
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 RS, 05 GTO (sold), 10 TL AWD
Engine: 383 HSR w/DSC1
Transmission: 700r4
Axle/Gears: Strange S60/3.73
there, looks like a bad bondo job. the best fix would be to replace that portion of the qtr panel
#4
i'm pretty sure that's not bondo... the swirl effect around it was me trying to get the dirt off. to me it kinda looks like the owner might have used a reproduction part or soemthing and its just somehow managed to split.
#6
Supreme Member
Join Date: Jun 2003
Location: Massachusetts
Posts: 1,985
Likes: 0
Received 1 Like
on
1 Post
Car: candy blue 85 z28
Engine: 305 tpi LB9
Transmission: 700r4 crazy beefed up one
Axle/Gears: ones with teeth
yep thats a paint issue, not a repo part or anything like that, take a d/a and sand it all down and see whats under it, but be prepared to repaint as well, that looks like single stage paint which does tend to crack. its an fairly easy fix with the right equipment. if thats the only bad spot on the car take it in to a body shop for a quick fix shouldnt be more than a few hundered to redo that section and blend.
jeff
----------
oh and your main question... do not p;ut bondy over that the crak will come right back, sand away.... see what is under it, i wold guess bad bondy or just bad paint prep. sould also be 1k filler under 2 k paint filler without hardener will done some funky things under 2k paint( base clear)
jeff
----------
oh and your main question... do not p;ut bondy over that the crak will come right back, sand away.... see what is under it, i wold guess bad bondy or just bad paint prep. sould also be 1k filler under 2 k paint filler without hardener will done some funky things under 2k paint( base clear)
Last edited by JeffW; 12-31-2006 at 09:11 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post