crrllmich

I posted a while back pics sucked so heres some new ones. Also some new stuff done.

I am working on getting rid of the diverter valve now... sorry pardon the dirt.













If you have any questions about anything fire away.

Synful

looks good.

got any before pics with the tanks and A/C stuff in there?

Also, i can't find the non-AC heater box on summit, you got a link?

I'm interested in removing all A/C components from my car, any tips you have would be great.

Did you replace the heater controls inside with non a/c also? if so where'd you buyem

crrllmich

Sorry no pics before. Those are the first pics taken with my new camera.

Summit doesnt sell the box you have to buy used.

As for removing just start ripping crap out haha.

I still have the AC heater controls. THe non ac is actualy a whole different dash.

Stevo

iTrader: (45)

Now get an A/C delete pulley, there are some guys sellin them now in the classifieds.

They make Heat only controls which ill be putting in my car soon.

You should also get rid of the charcoal cansister like i just did. Leave the line open from the tank and run it down under the car with a filter or cap it and use a vented gas cap.

Oh and also your missing your front gfx piece

crrllmich

I am doing a march pull up assembly on the 383 I am working on. I am more worried about getting stuff out that way for right now then a delete pully.

The heat only controls are cable driven how are you doing that?

As for the canister I am thinking about boxing that area in anyways to cover the cruise control too.

Front GFX is off because I got a lot of painting supplies and my cars color.

Will be the first peice I spray.

TPI TERR

iTrader: (9)

what brake proportion valve are you running there? i was thinkning of re-using my stock one w/ the 4th gen master cylinder until i saw your set-up.

crrllmich

91-92 4 Wheel disc. I will post the part number later.