LTL_DMON

iTrader: (1)

Any one?

Stephen

iTrader: (12)

That's just a cowl-induction hood..Lots of places make them, with varying designs on the center ridge, angle of the front slope of it, etc.

LTL_DMON

iTrader: (1)

Ah, thank you, I found just what I was looking for...

http://www.restoreandcustom.com/8292...on-hood-f.html

LTL_DMON

iTrader: (1)

Oh, and whats the difference between bolt on and pin on?

91z 2 8

Bolt on use the factory hinges and pin on you have to use 4 hood pins one at each cornner to hold it down and you have to lift the whole hood off to take of a pin on. Get bolt on

Stephen

iTrader: (12)

Bolt-on fits the stock hinges & is held down by generally the stock latch and open like a stock hood.

Pin-ons do not have the inner support structure to utilize the stock hinges and so are lighter. But they cannot be latched with a stock latch. They require 1 pin per corner, in addition to 2 or 3 pins/latches along each side. They hafta be lifted and set somewhere (like on the cars roof) not simply "tilted" up.

WSX123

iTrader: (1)

I do like that hood, got me debating if i should order one or not.
here is some pics of my car http://www.wsxserver.com/GTA should i get it

drknow90rs_ss@y

iTrader: (3)

I, myself like the factory "4-vent" hood. If you like the look of the cowl hood, then by all means, get it. It is a nice looking hood, and you dont see many birds with cowl induction hoods.

LTL_DMON

iTrader: (1)

I like them both, but I think the cowl looks meaner.

DBLTKE

iTrader: (1)

You do realize that the picture in the OP and the hood in that link are two completely different designs right?

The hood in the picture appears to be a 3" Harwood cowl.

http://www.eharwood.com/catalog/prod...?productID=229

z28_valencia

I was looking a cowl hood for my IROC.

http://store.summitracing.com/defaul...-12101&FROM=MG

It's nice .

I think , that's what you need.

http://store.summitracing.com/partde...5&autoview=sku


Cheers , Juan

C.M.Jones

does someone else sell/make a hood like this? (besides hawks thirdgen)

I like it because it goes with the lines that are already on the hood but I want the Louver indentions in it

any help?

10secondhopeful

dang, thats one of the nice t/a's ive seen in a long time. I'm getting pretty much the same hood for my 'maro, i can't decided between the 3" and 5' though haha, but i'd personally say go for the cowl induction.

Arizona IROC

iTrader: (4)

It's a good look but a little too Ford to me. Just like a '95 Mustang for example.
Chevy already has the best traditional hood design with the cowl induction
shape IMO. Maybe a Cowl induction hood with the louvers built in would look cool

z28_valencia

http://store.summitracing.com/partde...5&autoview=sku

You can always buy the "add-on" itself , and bolt to the stock hood , custom stuff.


Greets , JF

C.M.Jones

but that's not wide enough
see the stock lines>

I want a cowl hood that goes with those lines

Stephen

iTrader: (12)

Which one isn't wide enough? The Jongbloed is the only cowl-style hood that follows those stock hood lines.

C.M.Jones

Thasnk you, I knew the hood I wanted, I just didn't know the name. THank You

Now the question is who sells them?

Arizona IROC

iTrader: (4)

here is a quick chop of what I mean. (sorry it's weak)

If you want louvers in one of those mustang looking hoods just cut out the holes and glass them in

Stephen

iTrader: (12)

Ya'll keep calling the Jongbloed "Mustang looking".....But the Jongbloed existed BEFORE the Mustang one did.

So....If anything, the Mustang copied it from us.

Stephen

iTrader: (12)

Only 1 place makes them.... http://northcountryfiberglass.com/carhoods.html

But read about them here & make your own decision.

Arizona IROC

iTrader: (4)

But Ford made a zillion hoods that look like that. Chevy has a nice looking traditional design that even Mopar and Pontiac guys sometimes use.

BADMAN

iTrader: (13)

How about this one? Third gen hood with first gen cowl. Made by Glasstek.
https://www.thirdgen.org/forums/body...bout-hood.html

LTL_DMON

iTrader: (1)

I found it on Ebay.

http://cgi.ebay.com/ebaymotors/Ponti...QQcmdZViewItem