aljohnsonii

i have two questions
one does anyone know the part number or where i can get the plastic shims in the pull down motor housing i have the small ones but need the wide ones

does anyone know if the back hatch can be adjusted the spolier hangs past my tail light about a half an inch and i have adjusted the glass but it still hangs over can you adjust the actual metal piece forward

qcworm

you can adjust the metal piece on the window but it isnt east, i have slotted theholes at the top where the hatch bolts to the car, i have had 7 cars with the same problem

qcworm

you can adjust the metal part up on the glass but i have also had to slot the holes at he

white gold 88

Plastic guides are available from TDS or Hawks. Here's a link to help you get your hatch alignedhttps://www.thirdgen.org/hatchalign

aljohnsonii

i found them on there but i need a oem part number

white gold 88

Don't think they are available from GM. Maybe part of assembly. Here's a link to what you need I think. http://www.top-downsolutions.com/pro...products_id=48

lonsal

iTrader: (2)

The guides were never available from GM as a replacement part. Which is why I stepped in to supply an aftermarket replacement version. Thanks GM!

Lon Salgren

aljohnsonii

i bought them about a year ago and i cant find them i got them from the dealer here locally for about a $1 a piece and i cant find the part number to order them again