I think my car hates me.
#1
I think my car hates me.
So I was all excited that I fixed every little problems with my car, literally no issues, and my doors decide they want to sag.
It's so bad I can see it scraping the ground effect a little because of the bottom of the door.
My question is, when the doors start to sag, what is it that causes it? Upper or lower hinge?
Will this kit fix my issue?
http://cgi.ebay.com/ebaymotors/GM-CA...#ht_4826wt_975
Thanks
It's so bad I can see it scraping the ground effect a little because of the bottom of the door.
My question is, when the doors start to sag, what is it that causes it? Upper or lower hinge?
Will this kit fix my issue?
http://cgi.ebay.com/ebaymotors/GM-CA...#ht_4826wt_975
Thanks
#2
Senior Member
iTrader: (1)
Join Date: Mar 2009
Location: Stoughton, MA
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro Z28
Engine: 305 5.0 V8 carburated
Transmission: 700r4
Re: I think my car hates me.
It could be either hinge. If you are replacing the pins, might as well do both. That kit should do it for you!
#3
Member
iTrader: (1)
Join Date: Sep 2008
Location: Tampa, Florida
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Trans AM
Engine: 305 TPI
Re: I think my car hates me.
I have the same problem with mine (my silver ground effects have turned gold)... If it's that bad you should be able to see the problem hinge... but I believe on mine the bottom one is worst off.... $60 is way WAY too much to pay for that, unless you like burning money that is Rock auto sells these kits for $2... you can also get them at you local auto parts store.
Last edited by LTL_DMON; 06-23-2011 at 07:51 PM.
#4
Supreme Member
iTrader: (1)
Join Date: Mar 2007
Location: Arlington, Tx
Posts: 3,525
Likes: 0
Received 6 Likes
on
5 Posts
Car: 91 Camaro RS
Engine: empty bay (for now)
Transmission: Built T-56
Axle/Gears: 3.42 stock posi disc
Re: I think my car hates me.
Just dont try and do the job alone (unless you have a door support tool for a jack). a beefy friend will work wonders.
#5
Re: I think my car hates me.
I just bought this:
http://www.rockauto.com/catalog/moreinfo.php?pk=1261450
at pepboys for $4 a pack. O_o, but at least I got it already and don't have to pay for shipping.
What about the upper hinge? Where can I find parts for that?
See, I got the pin and "bushings" those copper looking inserts, but what about that roller that the springed/latch ridges against? It looks all lopsided with the door open, I wonder if I need to replace that?
Where can I find that?
Thanks
http://www.rockauto.com/catalog/moreinfo.php?pk=1261450
at pepboys for $4 a pack. O_o, but at least I got it already and don't have to pay for shipping.
What about the upper hinge? Where can I find parts for that?
See, I got the pin and "bushings" those copper looking inserts, but what about that roller that the springed/latch ridges against? It looks all lopsided with the door open, I wonder if I need to replace that?
Where can I find that?
Thanks
Last edited by RyanEricW; 06-24-2011 at 01:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post