Iroc Z Cragar Original Louver hardware
#1
Junior Member
Thread Starter
Join Date: Jul 2012
Location: San Jose, CA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS
Engine: 5.0 TBI H.O. soon to be LS3 6.2l
Transmission: 700r4 - Soon to be T56
Axle/Gears: Moser 9" LSD, 3.54 Gears
Iroc Z Cragar Original Louver hardware
Attached is a picture of some window louver hardware that I'm unsure if to for aftermarket or the original hardware if someone can please give me some info I've never seen the confirmed hardware before or it's mounting locations.
In the picture I know where the clips go but where do the black pieces attach to the louver/rear window?
Any help would be greatly appreciated as I'm pushed for my time.
Thanks
In the picture I know where the clips go but where do the black pieces attach to the louver/rear window?
Any help would be greatly appreciated as I'm pushed for my time.
Thanks
#2
Junior Member
Join Date: Oct 2010
Location: oregon
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 camaro Z28
Engine: 350
Transmission: borg warner T5
Re: Iroc Z Cragar Original Louver hardware
the 4 lower ones attach to the window.. then the alan bolt thingys hold the louvers to those
#5
Moderator
Re: Iroc Z Cragar Original Louver hardware
That appears to be an almost complete set of factory hardware. The top two mount to the top of the window and contains the mounting for the louver hinges. The other four attach to the sides of the window for the louvers to attach to. There are two missing that attach to the bottom glass via double sided tape.
#7
Re: Iroc Z Cragar Original Louver hardware
hey all... ive read some posts where guys are looking for side clips for cragar rear window louvers that need to be replaced.. i too am in this predicament so i removed one i had and am currently getting a quote to have some manufactured and perhaps some extra if theres a demand. these will b made at a machine shop out of original style spring steel. if u need any let me know before i have them made. as far as i know they cvannot b purchased from any supplier
Trending Topics
#9
Re: Iroc Z Cragar Original Louver hardware
hey all... ive read some posts where guys are looking for side clips for cragar rear window louvers that need to be replaced.. i too am in this predicament so i removed one i had and am currently getting a quote to have some manufactured and perhaps some extra if theres a demand. these will b made at a machine shop out of original style spring steel. if u need any let me know before i have them made. as far as i know they cvannot b purchased from any supplier
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
Exterior Parts for Sale
5
04-04-2016 12:50 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM