80's Al

Is there a company that's makes the "blue" halogen headlights for a 3rd gen?
I'm sure this question is beat into the ground, but can't seem to find in archives.
thanx

80's AL
80' Berlinetta
89' RS

MNformula350

iTrader: (2)

Checker auto parts has hte sylvania cool blue headlights.
For a friebird the part# is 6054CB
I don't remember what the Camaro one is right off the top of my head,but it would be the regular replacement # with a CB after it.

Zepher

iTrader: (1)

I have those Cool Blue lights on my T/A. Not really blue, but a really bright white, I like them.

80's Al

So....I'm sure @ most parts stores, I can just look for Sylvania, CB after the P# , and they should be able to find it. being I have a Camaro, I'll need high beams too...

THANX

80's AL
80' Berlinetta
89' RS

FlyinLow89

http://www.procarparts.com/store/dis...d=DIAM-XENCONV

this is the link to get the kit. Include the whole headlamp assembly with a diamond cut lens and gas charged hyper ****e bulbs

85maroz28

Or you can try ebay!! http://cgi.ebay.com/ebaymotors/aw-cg...item=600465137

fiream

Rather then dealing with ebay you can just go to: www.prostreetlighting.com to get the diamond cut housing and a set of Tucan industries blue H4 Exnon placement bulbs. I got my set for $70.00 on ebay, but if you call them direct they may give you a cheaper price. They look really nice too.

Note:These are blue in person.

fiream

heres another

91fbirdgta

iTrader: (1)

hey guys, on was on the market for this headlight conversion kit, but when looking at the 2 different websites given by FlyinLow89 and fiream- i noticed that there seems to be a size difference-prostreet lighting only gives the size 5 X 7 inch diamond cut sealed beam housings, while procarparts gives numerous sizes for the H4 replacement bulb-that is the replacement bulb for a firebird-H4666 right??? because they say it replaces "H6054"???
i'm a little confused! can a firebird fit a 5x7 or 6x8???-does it matter?!?!?

fiream

My kit fits fine

91fbirdgta

iTrader: (1)

fiream, i'm sure it does fit fine-but what is the actual measurement of the kit u have on now? i measured my bulb casing and it was
4 1/2 x 6 1/2-but like i said the kits on those websites have diff. measurements then that like, 5x7 and 6x8, no 4 1/2 x 6 1/2, see my point!
and it does come w/ the casing right!?!? and are the lights blue???

fiream

I have the 5x7 kit, and if fits right into place. The 6x8 is way to big and will not fit, some mods would be nessesarry. the bulbs are blue that i have, you can really tell in the picture. The bulbs are from Tucan Industries they are H4 55w/65ww and they are Exnon bulbs.

What you get in the kit is the 5x7 casing thats diamond cut glass, a rear rubber boot cover to keet water out, and the bulbs.

80's Al

That ProStreetLighting looks like the way to go.
Thanks for all the help.

90's AL
80' Berlinetta
89' RS

jm91rs

I saw a kit for hyper white on ebay once before. It somehow converted the sealed light to something with a replacable bulb.