1LE brake installation
#1
1LE brake installation
Installing 1LE brake kit. Passenger side went together well. The driver side bolts together with the bleed screw at the bottom of the caliper. The bleed screw goes into a shallow beveled hole, and the supply line bolts into a deeper hole so it appears the two are not interchangeable. Am I missing something or do I have two passenger side calipers? Any Thoughts?
#2
Moderator
iTrader: (5)
A pic of the driver's side in the following link might be helpful:
https://www.thirdgen.org/techbb2/sho...hreadid=246768
JamesC
https://www.thirdgen.org/techbb2/sho...hreadid=246768
JamesC
#3
Supreme Member
iTrader: (7)
Join Date: Mar 2001
Location: Fort Mill, SC, USA
Posts: 6,420
Likes: 0
Received 4 Likes
on
4 Posts
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
The other side should be a mirror image. If you dont' have that, then my guess is that you have 2 driver's side. You should be able to tell by taking the bleeder screw out and looking into the hole.
Ed
Ed
#4
1LE brakes
On closer inspection, it appears I have two identical calipers. The boxes they came in have different part numbers so a mix-up occurred somewhere along the line.
Thread
Thread Starter
Forum
Replies
Last Post
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM