Quick question about wheel bearings while changing rotor
10-01-2011, 10:52 AM
#1
Member
Thread Starter
Join Date: Jul 2008
Location: North Carolina
Posts: 248
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS camaro, 99 Z-24 cavalier
Engine: 5.0L TBI, 2.4L
Transmission: 700r4
Axle/Gears: 2.73
Quick question about wheel bearings while changing rotor
so Im in the middle of changing the front rotors and wheel bearings on my 92 RS. I noticed that the replacement bearings have outer races on them while the bearings that were on the car did not have any on them. now after installing the inner bearing and race Im having difficulty getting to the rotor to go back on. Is there some easy way to getting the rotor back on that Im missing? and has anyone else pulled the bearings out that didnt have the races on them?
10-01-2011, 10:45 PM
#2
Member
Thread Starter
Join Date: Jul 2008
Location: North Carolina
Posts: 248
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS camaro, 99 Z-24 cavalier
Engine: 5.0L TBI, 2.4L
Transmission: 700r4
Axle/Gears: 2.73
Re: Quick question about wheel bearings while changing rotor
Nevermind figured out what the problem was.
Thread
Thread Starter
Forum
Replies
Last Post
